1 | gogo-macbook:~ occ$ sudo port -d install ffmpeg |
---|
2 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg |
---|
3 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/ffmpeg |
---|
4 | DEBUG: OS Platform: darwin |
---|
5 | DEBUG: OS Version: 10.0.0 |
---|
6 | DEBUG: Mac OS X Version: 10.6 |
---|
7 | DEBUG: System Arch: i386 |
---|
8 | DEBUG: setting option os.universal_supported to yes |
---|
9 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
10 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
11 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
12 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
13 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
14 | DEBUG: Requested variant darwin is not provided by port ffmpeg. |
---|
15 | DEBUG: Requested variant i386 is not provided by port ffmpeg. |
---|
16 | DEBUG: Requested variant macosx is not provided by port ffmpeg. |
---|
17 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
18 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame |
---|
19 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
20 | DEBUG: lame 3.98.2_1 exists in the ports tree |
---|
21 | DEBUG: lame 3.98.2_1 is the latest installed |
---|
22 | DEBUG: lame 3.98.2_1 is active |
---|
23 | DEBUG: Merging existing variants into variants |
---|
24 | DEBUG: new fully merged portvariants: |
---|
25 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/lame |
---|
26 | DEBUG: OS Platform: darwin |
---|
27 | DEBUG: OS Version: 10.0.0 |
---|
28 | DEBUG: Mac OS X Version: 10.6 |
---|
29 | DEBUG: System Arch: i386 |
---|
30 | DEBUG: setting option os.universal_supported to yes |
---|
31 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
32 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
33 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
34 | DEBUG: adding the default universal variant |
---|
35 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
36 | DEBUG: Requested variant darwin is not provided by port lame. |
---|
37 | DEBUG: Requested variant i386 is not provided by port lame. |
---|
38 | DEBUG: Requested variant macosx is not provided by port lame. |
---|
39 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
40 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
41 | DEBUG: ncurses 5.7_0 exists in the ports tree |
---|
42 | DEBUG: ncurses 5.7_0 is the latest installed |
---|
43 | DEBUG: ncurses 5.7_0 is active |
---|
44 | DEBUG: Merging existing variants into variants |
---|
45 | DEBUG: new fully merged portvariants: |
---|
46 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
47 | DEBUG: OS Platform: darwin |
---|
48 | DEBUG: OS Version: 10.0.0 |
---|
49 | DEBUG: Mac OS X Version: 10.6 |
---|
50 | DEBUG: System Arch: i386 |
---|
51 | DEBUG: setting option os.universal_supported to yes |
---|
52 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
53 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
54 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
55 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
56 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
57 | DEBUG: universal variant already exists, so not adding the default one |
---|
58 | DEBUG: Requested variant darwin is not provided by port ncurses. |
---|
59 | DEBUG: Requested variant i386 is not provided by port ncurses. |
---|
60 | DEBUG: Requested variant macosx is not provided by port ncurses. |
---|
61 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
62 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
63 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
64 | DEBUG: ncursesw 5.7_0 exists in the ports tree |
---|
65 | DEBUG: ncursesw 5.7_0 is the latest installed |
---|
66 | DEBUG: ncursesw 5.7_0 is active |
---|
67 | DEBUG: Merging existing variants into variants |
---|
68 | DEBUG: new fully merged portvariants: |
---|
69 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
70 | DEBUG: OS Platform: darwin |
---|
71 | DEBUG: OS Version: 10.0.0 |
---|
72 | DEBUG: Mac OS X Version: 10.6 |
---|
73 | DEBUG: System Arch: i386 |
---|
74 | DEBUG: setting option os.universal_supported to yes |
---|
75 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
76 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
77 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
78 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
79 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
80 | DEBUG: universal variant already exists, so not adding the default one |
---|
81 | DEBUG: Requested variant darwin is not provided by port ncursesw. |
---|
82 | DEBUG: Requested variant i386 is not provided by port ncursesw. |
---|
83 | DEBUG: Requested variant macosx is not provided by port ncursesw. |
---|
84 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
85 | Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. |
---|
86 | Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. |
---|
87 | DEBUG: No need to upgrade! lame 3.98.2_1 >= lame 3.98.2_1 |
---|
88 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis |
---|
89 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
90 | DEBUG: libvorbis 1.2.3_0 exists in the ports tree |
---|
91 | DEBUG: libvorbis 1.2.3_0 is the latest installed |
---|
92 | DEBUG: libvorbis 1.2.3_0 is active |
---|
93 | DEBUG: Merging existing variants into variants |
---|
94 | DEBUG: new fully merged portvariants: |
---|
95 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/libvorbis |
---|
96 | DEBUG: OS Platform: darwin |
---|
97 | DEBUG: OS Version: 10.0.0 |
---|
98 | DEBUG: Mac OS X Version: 10.6 |
---|
99 | DEBUG: System Arch: i386 |
---|
100 | DEBUG: setting option os.universal_supported to yes |
---|
101 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
102 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
103 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
104 | DEBUG: adding the default universal variant |
---|
105 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
106 | DEBUG: Requested variant darwin is not provided by port libvorbis. |
---|
107 | DEBUG: Requested variant i386 is not provided by port libvorbis. |
---|
108 | DEBUG: Requested variant macosx is not provided by port libvorbis. |
---|
109 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
---|
110 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
111 | DEBUG: pkgconfig 0.23_1 exists in the ports tree |
---|
112 | DEBUG: pkgconfig 0.23_1 is the latest installed |
---|
113 | DEBUG: pkgconfig 0.23_1 is active |
---|
114 | DEBUG: Merging existing variants into variants |
---|
115 | DEBUG: new fully merged portvariants: |
---|
116 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
---|
117 | DEBUG: OS Platform: darwin |
---|
118 | DEBUG: OS Version: 10.0.0 |
---|
119 | DEBUG: Mac OS X Version: 10.6 |
---|
120 | DEBUG: System Arch: i386 |
---|
121 | DEBUG: setting option os.universal_supported to yes |
---|
122 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
123 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
124 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
125 | DEBUG: adding the default universal variant |
---|
126 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
127 | DEBUG: Requested variant darwin is not provided by port pkgconfig. |
---|
128 | DEBUG: Requested variant i386 is not provided by port pkgconfig. |
---|
129 | DEBUG: Requested variant macosx is not provided by port pkgconfig. |
---|
130 | DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 |
---|
131 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg |
---|
132 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
133 | DEBUG: libogg 1.1.4_0 exists in the ports tree |
---|
134 | DEBUG: libogg 1.1.4_0 is the latest installed |
---|
135 | DEBUG: libogg 1.1.4_0 is active |
---|
136 | DEBUG: Merging existing variants into variants |
---|
137 | DEBUG: new fully merged portvariants: |
---|
138 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libogg |
---|
139 | DEBUG: OS Platform: darwin |
---|
140 | DEBUG: OS Version: 10.0.0 |
---|
141 | DEBUG: Mac OS X Version: 10.6 |
---|
142 | DEBUG: System Arch: i386 |
---|
143 | DEBUG: setting option os.universal_supported to yes |
---|
144 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
145 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
146 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
147 | DEBUG: adding the default universal variant |
---|
148 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
149 | DEBUG: Requested variant darwin is not provided by port libogg. |
---|
150 | DEBUG: Requested variant i386 is not provided by port libogg. |
---|
151 | DEBUG: Requested variant macosx is not provided by port libogg. |
---|
152 | DEBUG: No need to upgrade! libogg 1.1.4_0 >= libogg 1.1.4_0 |
---|
153 | DEBUG: No need to upgrade! libvorbis 1.2.3_0 >= libvorbis 1.2.3_0 |
---|
154 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora |
---|
155 | DEBUG: epoch: in tree: 1 installed: 1 |
---|
156 | DEBUG: libtheora 1.1.1_0 exists in the ports tree |
---|
157 | DEBUG: libtheora 1.1.1_0 is the latest installed |
---|
158 | DEBUG: libtheora 1.1.1_0 is active |
---|
159 | DEBUG: Merging existing variants into variants |
---|
160 | DEBUG: new fully merged portvariants: |
---|
161 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/libtheora |
---|
162 | DEBUG: OS Platform: darwin |
---|
163 | DEBUG: OS Version: 10.0.0 |
---|
164 | DEBUG: Mac OS X Version: 10.6 |
---|
165 | DEBUG: System Arch: i386 |
---|
166 | DEBUG: setting option os.universal_supported to yes |
---|
167 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
168 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
169 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
170 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
171 | DEBUG: adding the default universal variant |
---|
172 | DEBUG: Requested variant darwin is not provided by port libtheora. |
---|
173 | DEBUG: Requested variant i386 is not provided by port libtheora. |
---|
174 | DEBUG: Requested variant macosx is not provided by port libtheora. |
---|
175 | DEBUG: No need to upgrade! libtheora 1.1.1_0 >= libtheora 1.1.1_0 |
---|
176 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac |
---|
177 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
178 | DEBUG: dirac 1.0.2_0 exists in the ports tree |
---|
179 | DEBUG: dirac 1.0.2_0 is the latest installed |
---|
180 | DEBUG: dirac 1.0.2_0 is active |
---|
181 | DEBUG: Merging existing variants into variants |
---|
182 | DEBUG: new fully merged portvariants: |
---|
183 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/dirac |
---|
184 | DEBUG: OS Platform: darwin |
---|
185 | DEBUG: OS Version: 10.0.0 |
---|
186 | DEBUG: Mac OS X Version: 10.6 |
---|
187 | DEBUG: System Arch: i386 |
---|
188 | DEBUG: setting option os.universal_supported to yes |
---|
189 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
190 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
191 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
192 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
193 | DEBUG: Requested variant darwin is not provided by port dirac. |
---|
194 | DEBUG: Requested variant i386 is not provided by port dirac. |
---|
195 | DEBUG: Requested variant macosx is not provided by port dirac. |
---|
196 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit |
---|
197 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
198 | DEBUG: cppunit 1.12.1_0 exists in the ports tree |
---|
199 | DEBUG: cppunit 1.12.1_0 is the latest installed |
---|
200 | DEBUG: cppunit 1.12.1_0 is active |
---|
201 | DEBUG: Merging existing variants into variants |
---|
202 | DEBUG: new fully merged portvariants: |
---|
203 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cppunit |
---|
204 | DEBUG: OS Platform: darwin |
---|
205 | DEBUG: OS Version: 10.0.0 |
---|
206 | DEBUG: Mac OS X Version: 10.6 |
---|
207 | DEBUG: System Arch: i386 |
---|
208 | DEBUG: setting option os.universal_supported to yes |
---|
209 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
210 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
211 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
212 | DEBUG: adding the default universal variant |
---|
213 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
214 | DEBUG: Requested variant darwin is not provided by port cppunit. |
---|
215 | DEBUG: Requested variant i386 is not provided by port cppunit. |
---|
216 | DEBUG: Requested variant macosx is not provided by port cppunit. |
---|
217 | DEBUG: No need to upgrade! cppunit 1.12.1_0 >= cppunit 1.12.1_0 |
---|
218 | DEBUG: No need to upgrade! dirac 1.0.2_0 >= dirac 1.0.2_0 |
---|
219 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac |
---|
220 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
221 | DEBUG: faac 1.28_1 exists in the ports tree |
---|
222 | DEBUG: faac 1.28_1 is the latest installed |
---|
223 | DEBUG: faac 1.28_1 is active |
---|
224 | DEBUG: Merging existing variants into variants |
---|
225 | DEBUG: new fully merged portvariants: |
---|
226 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faac |
---|
227 | DEBUG: OS Platform: darwin |
---|
228 | DEBUG: OS Version: 10.0.0 |
---|
229 | DEBUG: Mac OS X Version: 10.6 |
---|
230 | DEBUG: System Arch: i386 |
---|
231 | DEBUG: setting option os.universal_supported to yes |
---|
232 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
233 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
234 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
235 | DEBUG: adding the default universal variant |
---|
236 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
237 | DEBUG: Requested variant darwin is not provided by port faac. |
---|
238 | DEBUG: Requested variant i386 is not provided by port faac. |
---|
239 | DEBUG: Requested variant macosx is not provided by port faac. |
---|
240 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
---|
241 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
242 | DEBUG: autoconf 2.64_2 exists in the ports tree |
---|
243 | DEBUG: autoconf 2.64_2 is the latest installed |
---|
244 | DEBUG: autoconf 2.64_2 is active |
---|
245 | DEBUG: Merging existing variants into variants |
---|
246 | DEBUG: new fully merged portvariants: |
---|
247 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
---|
248 | DEBUG: OS Platform: darwin |
---|
249 | DEBUG: OS Version: 10.0.0 |
---|
250 | DEBUG: Mac OS X Version: 10.6 |
---|
251 | DEBUG: System Arch: i386 |
---|
252 | DEBUG: setting option os.universal_supported to yes |
---|
253 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
254 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
255 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
256 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
257 | DEBUG: Requested variant darwin is not provided by port autoconf. |
---|
258 | DEBUG: Requested variant i386 is not provided by port autoconf. |
---|
259 | DEBUG: Requested variant macosx is not provided by port autoconf. |
---|
260 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
261 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
262 | DEBUG: perl5 5.8.9_0 exists in the ports tree |
---|
263 | DEBUG: perl5 5.8.9_0 is the latest installed |
---|
264 | DEBUG: perl5 5.8.9_0 is active |
---|
265 | DEBUG: Merging existing variants into variants |
---|
266 | DEBUG: new fully merged portvariants: |
---|
267 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
268 | DEBUG: OS Platform: darwin |
---|
269 | DEBUG: OS Version: 10.0.0 |
---|
270 | DEBUG: Mac OS X Version: 10.6 |
---|
271 | DEBUG: System Arch: i386 |
---|
272 | DEBUG: setting option os.universal_supported to yes |
---|
273 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
274 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
275 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
276 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
277 | DEBUG: Requested variant darwin is not provided by port perl5. |
---|
278 | DEBUG: Requested variant i386 is not provided by port perl5. |
---|
279 | DEBUG: Requested variant macosx is not provided by port perl5. |
---|
280 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
281 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
282 | DEBUG: perl5.8 5.8.9_3 exists in the ports tree |
---|
283 | DEBUG: perl5.8 5.8.9_3 is the latest installed |
---|
284 | DEBUG: perl5.8 5.8.9_3 is active |
---|
285 | DEBUG: Merging existing variants into variants |
---|
286 | DEBUG: new fully merged portvariants: |
---|
287 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
288 | DEBUG: OS Platform: darwin |
---|
289 | DEBUG: OS Version: 10.0.0 |
---|
290 | DEBUG: Mac OS X Version: 10.6 |
---|
291 | DEBUG: System Arch: i386 |
---|
292 | DEBUG: setting option os.universal_supported to yes |
---|
293 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
294 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
295 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
296 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
297 | DEBUG: Requested variant darwin is not provided by port perl5.8. |
---|
298 | DEBUG: Requested variant i386 is not provided by port perl5.8. |
---|
299 | DEBUG: Requested variant macosx is not provided by port perl5.8. |
---|
300 | DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
---|
301 | DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
---|
302 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
---|
303 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
304 | DEBUG: m4 1.4.13_0 exists in the ports tree |
---|
305 | DEBUG: m4 1.4.13_0 is the latest installed |
---|
306 | DEBUG: m4 1.4.13_0 is active |
---|
307 | DEBUG: Merging existing variants into variants |
---|
308 | DEBUG: new fully merged portvariants: |
---|
309 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
---|
310 | DEBUG: OS Platform: darwin |
---|
311 | DEBUG: OS Version: 10.0.0 |
---|
312 | DEBUG: Mac OS X Version: 10.6 |
---|
313 | DEBUG: System Arch: i386 |
---|
314 | DEBUG: setting option os.universal_supported to yes |
---|
315 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
316 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
317 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
318 | DEBUG: adding the default universal variant |
---|
319 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
320 | DEBUG: Requested variant darwin is not provided by port m4. |
---|
321 | DEBUG: Requested variant i386 is not provided by port m4. |
---|
322 | DEBUG: Requested variant macosx is not provided by port m4. |
---|
323 | DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 |
---|
324 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
---|
325 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
326 | DEBUG: help2man 1.36.4_1 exists in the ports tree |
---|
327 | DEBUG: help2man 1.36.4_1 is the latest installed |
---|
328 | DEBUG: help2man 1.36.4_1 is active |
---|
329 | DEBUG: Merging existing variants into variants |
---|
330 | DEBUG: new fully merged portvariants: |
---|
331 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
---|
332 | DEBUG: OS Platform: darwin |
---|
333 | DEBUG: OS Version: 10.0.0 |
---|
334 | DEBUG: Mac OS X Version: 10.6 |
---|
335 | DEBUG: System Arch: i386 |
---|
336 | DEBUG: setting option os.universal_supported to yes |
---|
337 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
338 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
339 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
340 | DEBUG: adding the default universal variant |
---|
341 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
342 | DEBUG: Requested variant darwin is not provided by port help2man. |
---|
343 | DEBUG: Requested variant i386 is not provided by port help2man. |
---|
344 | DEBUG: Requested variant macosx is not provided by port help2man. |
---|
345 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
---|
346 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
347 | DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree |
---|
348 | DEBUG: p5-locale-gettext 1.05_0 is the latest installed |
---|
349 | DEBUG: p5-locale-gettext 1.05_0 is active |
---|
350 | DEBUG: Merging existing variants into variants |
---|
351 | DEBUG: new fully merged portvariants: |
---|
352 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
---|
353 | DEBUG: OS Platform: darwin |
---|
354 | DEBUG: OS Version: 10.0.0 |
---|
355 | DEBUG: Mac OS X Version: 10.6 |
---|
356 | DEBUG: System Arch: i386 |
---|
357 | DEBUG: setting option os.universal_supported to yes |
---|
358 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
359 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
360 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
361 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl |
---|
362 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
363 | DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. |
---|
364 | DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. |
---|
365 | DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. |
---|
366 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
367 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
368 | DEBUG: gettext 0.17_4 exists in the ports tree |
---|
369 | DEBUG: gettext 0.17_4 is the latest installed |
---|
370 | DEBUG: gettext 0.17_4 is active |
---|
371 | DEBUG: Merging existing variants into variants |
---|
372 | DEBUG: new fully merged portvariants: |
---|
373 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
374 | DEBUG: OS Platform: darwin |
---|
375 | DEBUG: OS Version: 10.0.0 |
---|
376 | DEBUG: Mac OS X Version: 10.6 |
---|
377 | DEBUG: System Arch: i386 |
---|
378 | DEBUG: setting option os.universal_supported to yes |
---|
379 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
380 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
381 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
382 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
383 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
384 | DEBUG: universal variant already exists, so not adding the default one |
---|
385 | DEBUG: Requested variant darwin is not provided by port gettext. |
---|
386 | DEBUG: Requested variant i386 is not provided by port gettext. |
---|
387 | DEBUG: Requested variant macosx is not provided by port gettext. |
---|
388 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
389 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
390 | DEBUG: libiconv 1.13_0 exists in the ports tree |
---|
391 | DEBUG: libiconv 1.13_0 is the latest installed |
---|
392 | DEBUG: libiconv 1.13_0 is active |
---|
393 | DEBUG: Merging existing variants into variants |
---|
394 | DEBUG: new fully merged portvariants: |
---|
395 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
396 | DEBUG: OS Platform: darwin |
---|
397 | DEBUG: OS Version: 10.0.0 |
---|
398 | DEBUG: Mac OS X Version: 10.6 |
---|
399 | DEBUG: System Arch: i386 |
---|
400 | DEBUG: setting option os.universal_supported to yes |
---|
401 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
402 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
403 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
404 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
405 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
406 | DEBUG: universal variant already exists, so not adding the default one |
---|
407 | DEBUG: Requested variant darwin is not provided by port libiconv. |
---|
408 | DEBUG: Requested variant i386 is not provided by port libiconv. |
---|
409 | DEBUG: Requested variant macosx is not provided by port libiconv. |
---|
410 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
411 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
412 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
---|
413 | DEBUG: gperf 3.0.4_0 is the latest installed |
---|
414 | DEBUG: gperf 3.0.4_0 is active |
---|
415 | DEBUG: Merging existing variants into variants |
---|
416 | DEBUG: new fully merged portvariants: |
---|
417 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
418 | DEBUG: OS Platform: darwin |
---|
419 | DEBUG: OS Version: 10.0.0 |
---|
420 | DEBUG: Mac OS X Version: 10.6 |
---|
421 | DEBUG: System Arch: i386 |
---|
422 | DEBUG: setting option os.universal_supported to yes |
---|
423 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
424 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
425 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
426 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
427 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
428 | DEBUG: universal variant already exists, so not adding the default one |
---|
429 | DEBUG: Requested variant darwin is not provided by port gperf. |
---|
430 | DEBUG: Requested variant i386 is not provided by port gperf. |
---|
431 | DEBUG: Requested variant macosx is not provided by port gperf. |
---|
432 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
---|
433 | DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 |
---|
434 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
435 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
436 | DEBUG: expat 2.0.1_0 exists in the ports tree |
---|
437 | DEBUG: expat 2.0.1_0 is the latest installed |
---|
438 | DEBUG: expat 2.0.1_0 is active |
---|
439 | DEBUG: Merging existing variants into variants |
---|
440 | DEBUG: new fully merged portvariants: |
---|
441 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
442 | DEBUG: OS Platform: darwin |
---|
443 | DEBUG: OS Version: 10.0.0 |
---|
444 | DEBUG: Mac OS X Version: 10.6 |
---|
445 | DEBUG: System Arch: i386 |
---|
446 | DEBUG: setting option os.universal_supported to yes |
---|
447 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
448 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
449 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
450 | DEBUG: adding the default universal variant |
---|
451 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
452 | DEBUG: Requested variant darwin is not provided by port expat. |
---|
453 | DEBUG: Requested variant i386 is not provided by port expat. |
---|
454 | DEBUG: Requested variant macosx is not provided by port expat. |
---|
455 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
---|
456 | DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 |
---|
457 | DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 |
---|
458 | DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1 |
---|
459 | DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2 |
---|
460 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
---|
461 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
462 | DEBUG: automake 1.11_0 exists in the ports tree |
---|
463 | DEBUG: automake 1.11_0 is the latest installed |
---|
464 | DEBUG: automake 1.11_0 is active |
---|
465 | DEBUG: Merging existing variants into variants |
---|
466 | DEBUG: new fully merged portvariants: |
---|
467 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
---|
468 | DEBUG: OS Platform: darwin |
---|
469 | DEBUG: OS Version: 10.0.0 |
---|
470 | DEBUG: Mac OS X Version: 10.6 |
---|
471 | DEBUG: System Arch: i386 |
---|
472 | DEBUG: setting option os.universal_supported to yes |
---|
473 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
474 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
475 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
476 | DEBUG: adding the default universal variant |
---|
477 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
478 | DEBUG: Requested variant darwin is not provided by port automake. |
---|
479 | DEBUG: Requested variant i386 is not provided by port automake. |
---|
480 | DEBUG: Requested variant macosx is not provided by port automake. |
---|
481 | DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0 |
---|
482 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
---|
483 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
484 | DEBUG: libtool 2.2.6a_0 exists in the ports tree |
---|
485 | DEBUG: libtool 2.2.6a_0 is the latest installed |
---|
486 | DEBUG: libtool 2.2.6a_0 is active |
---|
487 | DEBUG: Merging existing variants into variants |
---|
488 | DEBUG: new fully merged portvariants: |
---|
489 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
---|
490 | DEBUG: OS Platform: darwin |
---|
491 | DEBUG: OS Version: 10.0.0 |
---|
492 | DEBUG: Mac OS X Version: 10.6 |
---|
493 | DEBUG: System Arch: i386 |
---|
494 | DEBUG: setting option os.universal_supported to yes |
---|
495 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
496 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
497 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
498 | DEBUG: adding the default universal variant |
---|
499 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
500 | DEBUG: Requested variant darwin is not provided by port libtool. |
---|
501 | DEBUG: Requested variant i386 is not provided by port libtool. |
---|
502 | DEBUG: Requested variant macosx is not provided by port libtool. |
---|
503 | DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0 |
---|
504 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/mp4v2 |
---|
505 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
506 | DEBUG: mp4v2 1.9.1_1 exists in the ports tree |
---|
507 | DEBUG: mp4v2 1.9.1_1 is the latest installed |
---|
508 | DEBUG: mp4v2 1.9.1_1 is active |
---|
509 | DEBUG: Merging existing variants into variants |
---|
510 | DEBUG: new fully merged portvariants: |
---|
511 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/mp4v2 |
---|
512 | DEBUG: OS Platform: darwin |
---|
513 | DEBUG: OS Version: 10.0.0 |
---|
514 | DEBUG: Mac OS X Version: 10.6 |
---|
515 | DEBUG: System Arch: i386 |
---|
516 | DEBUG: setting option os.universal_supported to yes |
---|
517 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
518 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
519 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
520 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
521 | DEBUG: universal variant already exists, so not adding the default one |
---|
522 | DEBUG: Requested variant darwin is not provided by port mp4v2. |
---|
523 | DEBUG: Requested variant i386 is not provided by port mp4v2. |
---|
524 | DEBUG: Requested variant macosx is not provided by port mp4v2. |
---|
525 | DEBUG: No need to upgrade! mp4v2 1.9.1_1 >= mp4v2 1.9.1_1 |
---|
526 | DEBUG: No need to upgrade! faac 1.28_1 >= faac 1.28_1 |
---|
527 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2 |
---|
528 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
529 | DEBUG: faad2 2.7_0 exists in the ports tree |
---|
530 | DEBUG: faad2 2.7_0 +darwin is the latest installed |
---|
531 | DEBUG: faad2 2.7_0 +darwin is active |
---|
532 | DEBUG: Merging existing variants darwin into variants |
---|
533 | DEBUG: new fully merged portvariants: |
---|
534 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/audio/faad2 |
---|
535 | DEBUG: OS Platform: darwin |
---|
536 | DEBUG: OS Version: 10.0.0 |
---|
537 | DEBUG: Mac OS X Version: 10.6 |
---|
538 | DEBUG: System Arch: i386 |
---|
539 | DEBUG: setting option os.universal_supported to yes |
---|
540 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
541 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
542 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
543 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
544 | DEBUG: adding the default universal variant |
---|
545 | DEBUG: Requested variant i386 is not provided by port faad2. |
---|
546 | DEBUG: Requested variant macosx is not provided by port faad2. |
---|
547 | DEBUG: Executing variant darwin provides darwin |
---|
548 | DEBUG: No need to upgrade! faad2 2.7_0 >= faad2 2.7_0 |
---|
549 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD |
---|
550 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
551 | DEBUG: XviD 1.2.2_0 exists in the ports tree |
---|
552 | DEBUG: XviD 1.2.2_0 is the latest installed |
---|
553 | DEBUG: XviD 1.2.2_0 is active |
---|
554 | DEBUG: Merging existing variants into variants |
---|
555 | DEBUG: new fully merged portvariants: |
---|
556 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/XviD |
---|
557 | DEBUG: OS Platform: darwin |
---|
558 | DEBUG: OS Version: 10.0.0 |
---|
559 | DEBUG: Mac OS X Version: 10.6 |
---|
560 | DEBUG: System Arch: i386 |
---|
561 | DEBUG: setting option os.universal_supported to yes |
---|
562 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
563 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
564 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
565 | DEBUG: adding the default universal variant |
---|
566 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
567 | DEBUG: Requested variant darwin is not provided by port XviD. |
---|
568 | DEBUG: Requested variant i386 is not provided by port XviD. |
---|
569 | DEBUG: Requested variant macosx is not provided by port XviD. |
---|
570 | DEBUG: No need to upgrade! XviD 1.2.2_0 >= XviD 1.2.2_0 |
---|
571 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
---|
572 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
573 | DEBUG: bzip2 1.0.5_3 exists in the ports tree |
---|
574 | DEBUG: bzip2 1.0.5_3 +darwin is the latest installed |
---|
575 | DEBUG: bzip2 1.0.5_3 +darwin is active |
---|
576 | DEBUG: Merging existing variants darwin into variants |
---|
577 | DEBUG: new fully merged portvariants: |
---|
578 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 |
---|
579 | DEBUG: OS Platform: darwin |
---|
580 | DEBUG: OS Version: 10.0.0 |
---|
581 | DEBUG: Mac OS X Version: 10.6 |
---|
582 | DEBUG: System Arch: i386 |
---|
583 | DEBUG: setting option os.universal_supported to yes |
---|
584 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
585 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
586 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
587 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
588 | DEBUG: universal variant already exists, so not adding the default one |
---|
589 | DEBUG: Requested variant i386 is not provided by port bzip2. |
---|
590 | DEBUG: Requested variant macosx is not provided by port bzip2. |
---|
591 | DEBUG: Executing variant darwin provides darwin |
---|
592 | DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 |
---|
593 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
---|
594 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
595 | DEBUG: zlib 1.2.3_3 exists in the ports tree |
---|
596 | DEBUG: zlib 1.2.3_3 is the latest installed |
---|
597 | DEBUG: zlib 1.2.3_3 is active |
---|
598 | DEBUG: Merging existing variants into variants |
---|
599 | DEBUG: new fully merged portvariants: |
---|
600 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
---|
601 | DEBUG: OS Platform: darwin |
---|
602 | DEBUG: OS Version: 10.0.0 |
---|
603 | DEBUG: Mac OS X Version: 10.6 |
---|
604 | DEBUG: System Arch: i386 |
---|
605 | DEBUG: setting option os.universal_supported to yes |
---|
606 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
607 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
608 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
609 | DEBUG: adding the default universal variant |
---|
610 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
611 | DEBUG: Requested variant darwin is not provided by port zlib. |
---|
612 | DEBUG: Requested variant i386 is not provided by port zlib. |
---|
613 | DEBUG: Requested variant macosx is not provided by port zlib. |
---|
614 | DEBUG: No need to upgrade! zlib 1.2.3_3 >= zlib 1.2.3_3 |
---|
615 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl-devel |
---|
616 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
617 | DEBUG: libsdl-devel 1.3.0-5101_0 exists in the ports tree |
---|
618 | DEBUG: libsdl-devel 1.3.0-5101_0 is the latest installed |
---|
619 | DEBUG: libsdl-devel 1.3.0-5101_0 is active |
---|
620 | DEBUG: Merging existing variants into variants |
---|
621 | DEBUG: new fully merged portvariants: |
---|
622 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl-devel |
---|
623 | DEBUG: OS Platform: darwin |
---|
624 | DEBUG: OS Version: 10.0.0 |
---|
625 | DEBUG: Mac OS X Version: 10.6 |
---|
626 | DEBUG: System Arch: i386 |
---|
627 | DEBUG: setting option os.universal_supported to yes |
---|
628 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
629 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
630 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
631 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
632 | DEBUG: Requested variant darwin is not provided by port libsdl-devel. |
---|
633 | DEBUG: Requested variant i386 is not provided by port libsdl-devel. |
---|
634 | DEBUG: Requested variant macosx is not provided by port libsdl-devel. |
---|
635 | DEBUG: No need to upgrade! libsdl-devel 1.3.0-5101_0 >= libsdl-devel 1.3.0-5101_0 |
---|
636 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake |
---|
637 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
638 | DEBUG: gmake 3.81_0 exists in the ports tree |
---|
639 | DEBUG: gmake 3.81_0 is the latest installed |
---|
640 | DEBUG: gmake 3.81_0 is active |
---|
641 | DEBUG: Merging existing variants into variants |
---|
642 | DEBUG: new fully merged portvariants: |
---|
643 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake |
---|
644 | DEBUG: OS Platform: darwin |
---|
645 | DEBUG: OS Version: 10.0.0 |
---|
646 | DEBUG: Mac OS X Version: 10.6 |
---|
647 | DEBUG: System Arch: i386 |
---|
648 | DEBUG: setting option os.universal_supported to yes |
---|
649 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
650 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
651 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
652 | DEBUG: adding the default universal variant |
---|
653 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
654 | DEBUG: Requested variant darwin is not provided by port gmake. |
---|
655 | DEBUG: Requested variant i386 is not provided by port gmake. |
---|
656 | DEBUG: Requested variant macosx is not provided by port gmake. |
---|
657 | DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0 |
---|
658 | ---> Computing dependencies for ffmpeg |
---|
659 | DEBUG: Checking for conflicts against ffmpeg |
---|
660 | DEBUG: Searching for dependency: ffmpeg-devel |
---|
661 | DEBUG: Didn't find receipt, going to depspec regex for: ffmpeg-devel |
---|
662 | DEBUG: Searching for dependency: lame |
---|
663 | DEBUG: Found Dependency: receipt exists for lame |
---|
664 | DEBUG: Searching for dependency: libvorbis |
---|
665 | DEBUG: Found Dependency: receipt exists for libvorbis |
---|
666 | DEBUG: Searching for dependency: libogg |
---|
667 | DEBUG: Found Dependency: receipt exists for libogg |
---|
668 | DEBUG: Searching for dependency: libtheora |
---|
669 | DEBUG: Found Dependency: receipt exists for libtheora |
---|
670 | DEBUG: Searching for dependency: dirac |
---|
671 | DEBUG: Found Dependency: receipt exists for dirac |
---|
672 | DEBUG: Searching for dependency: schroedinger |
---|
673 | DEBUG: Didn't find receipt, going to depspec regex for: schroedinger |
---|
674 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger |
---|
675 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/schroedinger |
---|
676 | DEBUG: OS Platform: darwin |
---|
677 | DEBUG: OS Version: 10.0.0 |
---|
678 | DEBUG: Mac OS X Version: 10.6 |
---|
679 | DEBUG: System Arch: i386 |
---|
680 | DEBUG: setting option os.universal_supported to yes |
---|
681 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
682 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
683 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
684 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
685 | DEBUG: Requested variant darwin is not provided by port schroedinger. |
---|
686 | DEBUG: Requested variant i386 is not provided by port schroedinger. |
---|
687 | DEBUG: Requested variant macosx is not provided by port schroedinger. |
---|
688 | DEBUG: Searching for dependency: faac |
---|
689 | DEBUG: Found Dependency: receipt exists for faac |
---|
690 | DEBUG: Searching for dependency: faad2 |
---|
691 | DEBUG: Found Dependency: receipt exists for faad2 |
---|
692 | DEBUG: Searching for dependency: XviD |
---|
693 | DEBUG: Found Dependency: receipt exists for XviD |
---|
694 | DEBUG: Searching for dependency: x264 |
---|
695 | DEBUG: Didn't find receipt, going to depspec regex for: x264 |
---|
696 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264 |
---|
697 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/multimedia/x264 |
---|
698 | DEBUG: OS Platform: darwin |
---|
699 | DEBUG: OS Version: 10.0.0 |
---|
700 | DEBUG: Mac OS X Version: 10.6 |
---|
701 | DEBUG: System Arch: i386 |
---|
702 | DEBUG: setting option os.universal_supported to yes |
---|
703 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
704 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
705 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
706 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
707 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
708 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl |
---|
709 | DEBUG: universal variant already exists, so not adding the default one |
---|
710 | DEBUG: Requested variant darwin is not provided by port x264. |
---|
711 | DEBUG: Requested variant i386 is not provided by port x264. |
---|
712 | DEBUG: Requested variant macosx is not provided by port x264. |
---|
713 | DEBUG: Searching for dependency: bzip2 |
---|
714 | DEBUG: Found Dependency: receipt exists for bzip2 |
---|
715 | DEBUG: Searching for dependency: zlib |
---|
716 | DEBUG: Found Dependency: receipt exists for zlib |
---|
717 | DEBUG: Searching for dependency: libsdl-devel |
---|
718 | DEBUG: Found Dependency: receipt exists for libsdl-devel |
---|
719 | DEBUG: Searching for dependency: gmake |
---|
720 | DEBUG: Found Dependency: receipt exists for gmake |
---|
721 | DEBUG: Searching for dependency: liboil |
---|
722 | DEBUG: Didn't find receipt, going to depspec regex for: liboil |
---|
723 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil |
---|
724 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/liboil |
---|
725 | DEBUG: OS Platform: darwin |
---|
726 | DEBUG: OS Version: 10.0.0 |
---|
727 | DEBUG: Mac OS X Version: 10.6 |
---|
728 | DEBUG: System Arch: i386 |
---|
729 | DEBUG: setting option os.universal_supported to yes |
---|
730 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
731 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
732 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
733 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
734 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
735 | DEBUG: Requested variant darwin is not provided by port liboil. |
---|
736 | DEBUG: Requested variant i386 is not provided by port liboil. |
---|
737 | DEBUG: Requested variant macosx is not provided by port liboil. |
---|
738 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
739 | DEBUG: Searching for dependency: pkgconfig |
---|
740 | DEBUG: Found Dependency: receipt exists for pkgconfig |
---|
741 | DEBUG: Searching for dependency: glib2 |
---|
742 | DEBUG: Found Dependency: receipt exists for glib2 |
---|
743 | DEBUG: Searching for dependency: pkgconfig |
---|
744 | DEBUG: Found Dependency: receipt exists for pkgconfig |
---|
745 | DEBUG: Searching for dependency: yasm |
---|
746 | DEBUG: Didn't find receipt, going to depspec regex for: yasm |
---|
747 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/yasm |
---|
748 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/yasm |
---|
749 | DEBUG: OS Platform: darwin |
---|
750 | DEBUG: OS Version: 10.0.0 |
---|
751 | DEBUG: Mac OS X Version: 10.6 |
---|
752 | DEBUG: System Arch: i386 |
---|
753 | DEBUG: setting option os.universal_supported to yes |
---|
754 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
755 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
756 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
757 | DEBUG: adding the default universal variant |
---|
758 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
759 | DEBUG: Requested variant darwin is not provided by port yasm. |
---|
760 | DEBUG: Requested variant i386 is not provided by port yasm. |
---|
761 | DEBUG: Requested variant macosx is not provided by port yasm. |
---|
762 | DEBUG: Searching for dependency: gettext |
---|
763 | DEBUG: Found Dependency: receipt exists for gettext |
---|
764 | DEBUG: Searching for dependency: libiconv |
---|
765 | DEBUG: Found Dependency: receipt exists for libiconv |
---|
766 | DEBUG: Executing org.macports.main (liboil) |
---|
767 | DEBUG: Skipping completed org.macports.fetch (liboil) |
---|
768 | DEBUG: Skipping completed org.macports.checksum (liboil) |
---|
769 | DEBUG: Skipping completed org.macports.extract (liboil) |
---|
770 | DEBUG: Skipping completed org.macports.patch (liboil) |
---|
771 | DEBUG: Skipping completed org.macports.configure (liboil) |
---|
772 | ---> Building liboil |
---|
773 | DEBUG: Executing org.macports.build (liboil) |
---|
774 | DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' |
---|
775 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_liboil/work/liboil-0.3.16" && /usr/bin/make -j2 all' |
---|
776 | /usr/bin/make all-recursive |
---|
777 | Making all in liboil |
---|
778 | Making all in c |
---|
779 | make[3]: Nothing to be done for `all'. |
---|
780 | Making all in colorspace |
---|
781 | make[3]: Nothing to be done for `all'. |
---|
782 | Making all in conv |
---|
783 | make[3]: Nothing to be done for `all'. |
---|
784 | Making all in copy |
---|
785 | make[3]: Nothing to be done for `all'. |
---|
786 | Making all in dct |
---|
787 | make[3]: Nothing to be done for `all'. |
---|
788 | Making all in jpeg |
---|
789 | make[3]: Nothing to be done for `all'. |
---|
790 | Making all in math |
---|
791 | make[3]: Nothing to be done for `all'. |
---|
792 | Making all in md5 |
---|
793 | make[3]: Nothing to be done for `all'. |
---|
794 | Making all in ref |
---|
795 | make[3]: Nothing to be done for `all'. |
---|
796 | Making all in simdpack |
---|
797 | make[3]: Nothing to be done for `all'. |
---|
798 | Making all in utf8 |
---|
799 | make[3]: Nothing to be done for `all'. |
---|
800 | Making all in deprecated |
---|
801 | make[3]: Nothing to be done for `all'. |
---|
802 | Making all in mmx |
---|
803 | make[3]: Nothing to be done for `all'. |
---|
804 | Making all in fb |
---|
805 | make[3]: Nothing to be done for `all'. |
---|
806 | Making all in sse |
---|
807 | make[3]: Nothing to be done for `all'. |
---|
808 | Making all in amd64 |
---|
809 | make[3]: Nothing to be done for `all'. |
---|
810 | Making all in i386_amd64 |
---|
811 | make[3]: Nothing to be done for `all'. |
---|
812 | make[3]: Nothing to be done for `all-am'. |
---|
813 | Making all in testsuite |
---|
814 | Making all in instruction |
---|
815 | make[3]: Nothing to be done for `all'. |
---|
816 | make[3]: Nothing to be done for `all-am'. |
---|
817 | Making all in examples |
---|
818 | Making all in jpeg |
---|
819 | make[3]: Nothing to be done for `all'. |
---|
820 | Making all in md5 |
---|
821 | make[3]: Nothing to be done for `all'. |
---|
822 | Making all in uberopt |
---|
823 | /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -L/opt/local/lib -o uberopt uberopt-uberopt.o ../../liboil/liboil-0.3.la -L/opt/local/lib -lglib-2.0 -lintl -liconv |
---|
824 | libtool: link: /usr/bin/gcc-4.2 -O2 -arch x86_64 -o .libs/uberopt uberopt-uberopt.o -L/opt/local/lib ../../liboil/.libs/liboil-0.3.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -framework Carbon |
---|
825 | ld: warning: in /opt/local/lib/libglib-2.0.dylib, file is not of required architecture |
---|
826 | ld: warning: in /opt/local/lib/libintl.dylib, file is not of required architecture |
---|
827 | ld: warning: in /opt/local/lib/libiconv.dylib, file is not of required architecture |
---|
828 | Undefined symbols: |
---|
829 | "_g_strsplit", referenced from: |
---|
830 | _read_file in uberopt-uberopt.o |
---|
831 | "_g_file_get_contents", referenced from: |
---|
832 | _read_file in uberopt-uberopt.o |
---|
833 | "_g_print", referenced from: |
---|
834 | _output_sequence in uberopt-uberopt.o |
---|
835 | _output_sequence in uberopt-uberopt.o |
---|
836 | _output_sequence in uberopt-uberopt.o |
---|
837 | _output_sequence in uberopt-uberopt.o |
---|
838 | _output_sequence in uberopt-uberopt.o |
---|
839 | _output_sequence in uberopt-uberopt.o |
---|
840 | _output_sequence in uberopt-uberopt.o |
---|
841 | _main in uberopt-uberopt.o |
---|
842 | _main in uberopt-uberopt.o |
---|
843 | _main in uberopt-uberopt.o |
---|
844 | _main in uberopt-uberopt.o |
---|
845 | _main in uberopt-uberopt.o |
---|
846 | _main in uberopt-uberopt.o |
---|
847 | _main in uberopt-uberopt.o |
---|
848 | _main in uberopt-uberopt.o |
---|
849 | _main in uberopt-uberopt.o |
---|
850 | "_g_random_int_range", referenced from: |
---|
851 | _main in uberopt-uberopt.o |
---|
852 | ld: symbol(s) not found |
---|
853 | collect2: ld returned 1 exit status |
---|
854 | make[3]: *** [uberopt] Error 1 |
---|
855 | make[2]: *** [all-recursive] Error 1 |
---|
856 | make[1]: *** [all-recursive] Error 1 |
---|
857 | make: *** [all] Error 2 |
---|
858 | Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_liboil/work/liboil-0.3.16" && /usr/bin/make -j2 all " returned error 2 |
---|
859 | Command output: Undefined symbols: |
---|
860 | "_g_strsplit", referenced from: |
---|
861 | _read_file in uberopt-uberopt.o |
---|
862 | "_g_file_get_contents", referenced from: |
---|
863 | _read_file in uberopt-uberopt.o |
---|
864 | "_g_print", referenced from: |
---|
865 | _output_sequence in uberopt-uberopt.o |
---|
866 | _output_sequence in uberopt-uberopt.o |
---|
867 | _output_sequence in uberopt-uberopt.o |
---|
868 | _output_sequence in uberopt-uberopt.o |
---|
869 | _output_sequence in uberopt-uberopt.o |
---|
870 | _output_sequence in uberopt-uberopt.o |
---|
871 | _output_sequence in uberopt-uberopt.o |
---|
872 | _main in uberopt-uberopt.o |
---|
873 | _main in uberopt-uberopt.o |
---|
874 | _main in uberopt-uberopt.o |
---|
875 | _main in uberopt-uberopt.o |
---|
876 | _main in uberopt-uberopt.o |
---|
877 | _main in uberopt-uberopt.o |
---|
878 | _main in uberopt-uberopt.o |
---|
879 | _main in uberopt-uberopt.o |
---|
880 | _main in uberopt-uberopt.o |
---|
881 | "_g_random_int_range", referenced from: |
---|
882 | _main in uberopt-uberopt.o |
---|
883 | ld: symbol(s) not found |
---|
884 | collect2: ld returned 1 exit status |
---|
885 | make[3]: *** [uberopt] Error 1 |
---|
886 | make[2]: *** [all-recursive] Error 1 |
---|
887 | make[1]: *** [all-recursive] Error 1 |
---|
888 | make: *** [all] Error 2 |
---|
889 | |
---|
890 | DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_liboil/work/liboil-0.3.16" && /usr/bin/make -j2 all " returned error 2 |
---|
891 | Command output: Undefined symbols: |
---|
892 | "_g_strsplit", referenced from: |
---|
893 | _read_file in uberopt-uberopt.o |
---|
894 | "_g_file_get_contents", referenced from: |
---|
895 | _read_file in uberopt-uberopt.o |
---|
896 | "_g_print", referenced from: |
---|
897 | _output_sequence in uberopt-uberopt.o |
---|
898 | _output_sequence in uberopt-uberopt.o |
---|
899 | _output_sequence in uberopt-uberopt.o |
---|
900 | _output_sequence in uberopt-uberopt.o |
---|
901 | _output_sequence in uberopt-uberopt.o |
---|
902 | _output_sequence in uberopt-uberopt.o |
---|
903 | _output_sequence in uberopt-uberopt.o |
---|
904 | _main in uberopt-uberopt.o |
---|
905 | _main in uberopt-uberopt.o |
---|
906 | _main in uberopt-uberopt.o |
---|
907 | _main in uberopt-uberopt.o |
---|
908 | _main in uberopt-uberopt.o |
---|
909 | _main in uberopt-uberopt.o |
---|
910 | _main in uberopt-uberopt.o |
---|
911 | _main in uberopt-uberopt.o |
---|
912 | _main in uberopt-uberopt.o |
---|
913 | "_g_random_int_range", referenced from: |
---|
914 | _main in uberopt-uberopt.o |
---|
915 | ld: symbol(s) not found |
---|
916 | collect2: ld returned 1 exit status |
---|
917 | make[3]: *** [uberopt] Error 1 |
---|
918 | make[2]: *** [all-recursive] Error 1 |
---|
919 | make[1]: *** [all-recursive] Error 1 |
---|
920 | make: *** [all] Error 2 |
---|
921 | |
---|
922 | while executing |
---|
923 | "command_exec build" |
---|
924 | (procedure "portbuild::build_main" line 9) |
---|
925 | invoked from within |
---|
926 | "$procedure $targetname" |
---|
927 | Warning: the following items did not execute (for liboil): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
---|
928 | Error: The following dependencies failed to build: schroedinger liboil x264 yasm |
---|
929 | Error: Status 1 encountered during processing. |
---|
930 | gogo-macbook:~ occ$ |
---|
931 | gogo-macbook:~ occ$ port version |
---|
932 | Version: 1.8.1 |
---|
933 | |
---|
934 | |
---|
935 | |
---|
936 | |
---|
937 | Hardware Overview: |
---|
938 | |
---|
939 | Model Name: MacBook |
---|
940 | Model Identifier: MacBook5,1 |
---|
941 | Processor Name: Intel Core 2 Duo |
---|
942 | Processor Speed: 2.4 GHz |
---|
943 | Number Of Processors: 1 |
---|
944 | Total Number Of Cores: 2 |
---|
945 | L2 Cache: 3 MB |
---|
946 | Memory: 4 GB |
---|
947 | Bus Speed: 1.07 GHz |
---|
948 | Boot ROM Version: MB51.0073.B06 |
---|
949 | SMC Version (system): 1.32f8 |
---|
950 | |
---|