1 | 620 ~$ sudo port -d install libzzip +universalDEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/libzzip |
---|
2 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/libzzip |
---|
3 | DEBUG: OS Platform: darwin |
---|
4 | DEBUG: OS Version: 10.2.0 |
---|
5 | DEBUG: Mac OS X Version: 10.6 |
---|
6 | DEBUG: System Arch: i386 |
---|
7 | DEBUG: setting option os.universal_supported to yes |
---|
8 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
9 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
10 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
11 | DEBUG: adding the default universal variant |
---|
12 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
13 | DEBUG: Requested variant darwin is not provided by port libzzip. |
---|
14 | DEBUG: Requested variant i386 is not provided by port libzzip. |
---|
15 | DEBUG: Requested variant macosx is not provided by port libzzip. |
---|
16 | DEBUG: Executing variant universal provides universal |
---|
17 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
---|
18 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
19 | DEBUG: zlib 1.2.3_4 exists in the ports tree |
---|
20 | DEBUG: zlib 1.2.3_4 +universal is the latest installed |
---|
21 | DEBUG: zlib 1.2.3_4 +universal is active |
---|
22 | DEBUG: Merging existing variants universal into variants |
---|
23 | DEBUG: new fully merged portvariants: universal + |
---|
24 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib |
---|
25 | DEBUG: OS Platform: darwin |
---|
26 | DEBUG: OS Version: 10.2.0 |
---|
27 | DEBUG: Mac OS X Version: 10.6 |
---|
28 | DEBUG: System Arch: i386 |
---|
29 | DEBUG: setting option os.universal_supported to yes |
---|
30 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
31 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
32 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
33 | DEBUG: adding the default universal variant |
---|
34 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
35 | DEBUG: Requested variant darwin is not provided by port zlib. |
---|
36 | DEBUG: Requested variant i386 is not provided by port zlib. |
---|
37 | DEBUG: Requested variant macosx is not provided by port zlib. |
---|
38 | DEBUG: Executing variant universal provides universal |
---|
39 | DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 |
---|
40 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
---|
41 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
42 | DEBUG: pkgconfig 0.23_1 exists in the ports tree |
---|
43 | DEBUG: pkgconfig 0.23_1 +universal is the latest installed |
---|
44 | DEBUG: pkgconfig 0.23_1 +universal is active |
---|
45 | DEBUG: Merging existing variants universal into variants |
---|
46 | DEBUG: new fully merged portvariants: universal + |
---|
47 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig |
---|
48 | DEBUG: OS Platform: darwin |
---|
49 | DEBUG: OS Version: 10.2.0 |
---|
50 | DEBUG: Mac OS X Version: 10.6 |
---|
51 | DEBUG: System Arch: i386 |
---|
52 | DEBUG: setting option os.universal_supported to yes |
---|
53 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
54 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
55 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
56 | DEBUG: adding the default universal variant |
---|
57 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
58 | DEBUG: Requested variant darwin is not provided by port pkgconfig. |
---|
59 | DEBUG: Requested variant i386 is not provided by port pkgconfig. |
---|
60 | DEBUG: Requested variant macosx is not provided by port pkgconfig. |
---|
61 | DEBUG: Executing variant universal provides universal |
---|
62 | DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 |
---|
63 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto |
---|
64 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
65 | DEBUG: xmlto 0.0.23_0 exists in the ports tree |
---|
66 | DEBUG: xmlto 0.0.23_0 is the latest installed |
---|
67 | DEBUG: xmlto 0.0.23_0 is active |
---|
68 | DEBUG: Merging existing variants into variants |
---|
69 | DEBUG: new fully merged portvariants: |
---|
70 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlto |
---|
71 | DEBUG: OS Platform: darwin |
---|
72 | DEBUG: OS Version: 10.2.0 |
---|
73 | DEBUG: Mac OS X Version: 10.6 |
---|
74 | DEBUG: System Arch: i386 |
---|
75 | DEBUG: setting option os.universal_supported to yes |
---|
76 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
77 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
78 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
79 | DEBUG: adding the default universal variant |
---|
80 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
81 | DEBUG: Requested variant darwin is not provided by port xmlto. |
---|
82 | DEBUG: Requested variant i386 is not provided by port xmlto. |
---|
83 | DEBUG: Requested variant macosx is not provided by port xmlto. |
---|
84 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils |
---|
85 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
86 | DEBUG: coreutils 8.4_0 exists in the ports tree |
---|
87 | DEBUG: coreutils 8.4_0 is the latest installed |
---|
88 | DEBUG: coreutils 8.4_0 is active |
---|
89 | DEBUG: Merging existing variants into variants |
---|
90 | DEBUG: new fully merged portvariants: |
---|
91 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils |
---|
92 | DEBUG: OS Platform: darwin |
---|
93 | DEBUG: OS Version: 10.2.0 |
---|
94 | DEBUG: Mac OS X Version: 10.6 |
---|
95 | DEBUG: System Arch: i386 |
---|
96 | DEBUG: setting option os.universal_supported to yes |
---|
97 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
98 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
99 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
100 | DEBUG: adding the default universal variant |
---|
101 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
102 | DEBUG: Requested variant darwin is not provided by port coreutils. |
---|
103 | DEBUG: Requested variant i386 is not provided by port coreutils. |
---|
104 | DEBUG: Requested variant macosx is not provided by port coreutils. |
---|
105 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
106 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
107 | DEBUG: gettext 0.17_4 exists in the ports tree |
---|
108 | DEBUG: gettext 0.17_4 is the latest installed |
---|
109 | DEBUG: gettext 0.17_4 is active |
---|
110 | DEBUG: Merging existing variants into variants |
---|
111 | DEBUG: new fully merged portvariants: |
---|
112 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
113 | DEBUG: OS Platform: darwin |
---|
114 | DEBUG: OS Version: 10.2.0 |
---|
115 | DEBUG: Mac OS X Version: 10.6 |
---|
116 | DEBUG: System Arch: i386 |
---|
117 | DEBUG: setting option os.universal_supported to yes |
---|
118 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
119 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
120 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
121 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
122 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
123 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
124 | DEBUG: universal variant already exists, so not adding the default one |
---|
125 | DEBUG: Requested variant darwin is not provided by port gettext. |
---|
126 | DEBUG: Requested variant i386 is not provided by port gettext. |
---|
127 | DEBUG: Requested variant macosx is not provided by port gettext. |
---|
128 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
129 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
130 | DEBUG: libiconv 1.13.1_0 exists in the ports tree |
---|
131 | DEBUG: libiconv 1.13.1_0 is the latest installed |
---|
132 | DEBUG: libiconv 1.13.1_0 is active |
---|
133 | DEBUG: Merging existing variants into variants |
---|
134 | DEBUG: new fully merged portvariants: |
---|
135 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
136 | DEBUG: OS Platform: darwin |
---|
137 | DEBUG: OS Version: 10.2.0 |
---|
138 | DEBUG: Mac OS X Version: 10.6 |
---|
139 | DEBUG: System Arch: i386 |
---|
140 | DEBUG: setting option os.universal_supported to yes |
---|
141 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
142 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
143 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
144 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
145 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
146 | DEBUG: universal variant already exists, so not adding the default one |
---|
147 | DEBUG: Requested variant darwin is not provided by port libiconv. |
---|
148 | DEBUG: Requested variant i386 is not provided by port libiconv. |
---|
149 | DEBUG: Requested variant macosx is not provided by port libiconv. |
---|
150 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
151 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
152 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
---|
153 | DEBUG: gperf 3.0.4_0 is the latest installed |
---|
154 | DEBUG: gperf 3.0.4_0 is active |
---|
155 | DEBUG: Merging existing variants into variants |
---|
156 | DEBUG: new fully merged portvariants: |
---|
157 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
158 | DEBUG: OS Platform: darwin |
---|
159 | DEBUG: OS Version: 10.2.0 |
---|
160 | DEBUG: Mac OS X Version: 10.6 |
---|
161 | DEBUG: System Arch: i386 |
---|
162 | DEBUG: setting option os.universal_supported to yes |
---|
163 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
164 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
165 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
166 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
167 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
168 | DEBUG: universal variant already exists, so not adding the default one |
---|
169 | DEBUG: Requested variant darwin is not provided by port gperf. |
---|
170 | DEBUG: Requested variant i386 is not provided by port gperf. |
---|
171 | DEBUG: Requested variant macosx is not provided by port gperf. |
---|
172 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
---|
173 | DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
---|
174 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
175 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
176 | DEBUG: ncurses 5.7_0 exists in the ports tree |
---|
177 | DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed |
---|
178 | DEBUG: ncurses 5.7_0 +darwin_10 is active |
---|
179 | DEBUG: Merging existing variants darwin_10 into variants |
---|
180 | DEBUG: new fully merged portvariants: |
---|
181 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
182 | DEBUG: OS Platform: darwin |
---|
183 | DEBUG: OS Version: 10.2.0 |
---|
184 | DEBUG: Mac OS X Version: 10.6 |
---|
185 | DEBUG: System Arch: i386 |
---|
186 | DEBUG: setting option os.universal_supported to yes |
---|
187 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
188 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
189 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
190 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
191 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
192 | DEBUG: universal variant already exists, so not adding the default one |
---|
193 | DEBUG: Requested variant darwin is not provided by port ncurses. |
---|
194 | DEBUG: Requested variant i386 is not provided by port ncurses. |
---|
195 | DEBUG: Requested variant macosx is not provided by port ncurses. |
---|
196 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
197 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
198 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
199 | DEBUG: ncursesw 5.7_0 exists in the ports tree |
---|
200 | DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed |
---|
201 | DEBUG: ncursesw 5.7_0 +darwin_10 is active |
---|
202 | DEBUG: Merging existing variants darwin_10 into variants |
---|
203 | DEBUG: new fully merged portvariants: |
---|
204 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
205 | DEBUG: OS Platform: darwin |
---|
206 | DEBUG: OS Version: 10.2.0 |
---|
207 | DEBUG: Mac OS X Version: 10.6 |
---|
208 | DEBUG: System Arch: i386 |
---|
209 | DEBUG: setting option os.universal_supported to yes |
---|
210 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
211 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
212 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
213 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
214 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
215 | DEBUG: universal variant already exists, so not adding the default one |
---|
216 | DEBUG: Requested variant darwin is not provided by port ncursesw. |
---|
217 | DEBUG: Requested variant i386 is not provided by port ncursesw. |
---|
218 | DEBUG: Requested variant macosx is not provided by port ncursesw. |
---|
219 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
220 | DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
---|
221 | DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
---|
222 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
223 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
224 | DEBUG: expat 2.0.1_0 exists in the ports tree |
---|
225 | DEBUG: expat 2.0.1_0 is the latest installed |
---|
226 | DEBUG: expat 2.0.1_0 is active |
---|
227 | DEBUG: Merging existing variants into variants |
---|
228 | DEBUG: new fully merged portvariants: |
---|
229 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
230 | DEBUG: OS Platform: darwin |
---|
231 | DEBUG: OS Version: 10.2.0 |
---|
232 | DEBUG: Mac OS X Version: 10.6 |
---|
233 | DEBUG: System Arch: i386 |
---|
234 | DEBUG: setting option os.universal_supported to yes |
---|
235 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
236 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
237 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
238 | DEBUG: adding the default universal variant |
---|
239 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
240 | DEBUG: Requested variant darwin is not provided by port expat. |
---|
241 | DEBUG: Requested variant i386 is not provided by port expat. |
---|
242 | DEBUG: Requested variant macosx is not provided by port expat. |
---|
243 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
---|
244 | DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 |
---|
245 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
---|
246 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
247 | DEBUG: gmp 4.3.2_0 exists in the ports tree |
---|
248 | DEBUG: gmp 4.3.2_0 is the latest installed |
---|
249 | DEBUG: gmp 4.3.2_0 is active |
---|
250 | DEBUG: Merging existing variants into variants |
---|
251 | DEBUG: new fully merged portvariants: |
---|
252 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp |
---|
253 | DEBUG: OS Platform: darwin |
---|
254 | DEBUG: OS Version: 10.2.0 |
---|
255 | DEBUG: Mac OS X Version: 10.6 |
---|
256 | DEBUG: System Arch: i386 |
---|
257 | DEBUG: setting option os.universal_supported to yes |
---|
258 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
259 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
260 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
261 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
262 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
263 | DEBUG: universal variant already exists, so not adding the default one |
---|
264 | DEBUG: Requested variant darwin is not provided by port gmp. |
---|
265 | DEBUG: Requested variant i386 is not provided by port gmp. |
---|
266 | DEBUG: Requested variant macosx is not provided by port gmp. |
---|
267 | DEBUG: No need to upgrade! gmp 4.3.2_0 >= gmp 4.3.2_0 |
---|
268 | DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0 |
---|
269 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/findutils |
---|
270 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
271 | DEBUG: findutils 4.4.2_0 exists in the ports tree |
---|
272 | DEBUG: findutils 4.4.2_0 is the latest installed |
---|
273 | DEBUG: findutils 4.4.2_0 is active |
---|
274 | DEBUG: Merging existing variants into variants |
---|
275 | DEBUG: new fully merged portvariants: |
---|
276 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/findutils |
---|
277 | DEBUG: OS Platform: darwin |
---|
278 | DEBUG: OS Version: 10.2.0 |
---|
279 | DEBUG: Mac OS X Version: 10.6 |
---|
280 | DEBUG: System Arch: i386 |
---|
281 | DEBUG: setting option os.universal_supported to yes |
---|
282 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
283 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
284 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
285 | DEBUG: adding the default universal variant |
---|
286 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
287 | DEBUG: Requested variant darwin is not provided by port findutils. |
---|
288 | DEBUG: Requested variant i386 is not provided by port findutils. |
---|
289 | DEBUG: Requested variant macosx is not provided by port findutils. |
---|
290 | DEBUG: No need to upgrade! findutils 4.4.2_0 >= findutils 4.4.2_0 |
---|
291 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt |
---|
292 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
293 | DEBUG: getopt 1.1.4_1 exists in the ports tree |
---|
294 | DEBUG: getopt 1.1.4_1 is the latest installed |
---|
295 | DEBUG: getopt 1.1.4_1 is active |
---|
296 | DEBUG: Merging existing variants into variants |
---|
297 | DEBUG: new fully merged portvariants: |
---|
298 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/getopt |
---|
299 | DEBUG: OS Platform: darwin |
---|
300 | DEBUG: OS Version: 10.2.0 |
---|
301 | DEBUG: Mac OS X Version: 10.6 |
---|
302 | DEBUG: System Arch: i386 |
---|
303 | DEBUG: setting option os.universal_supported to yes |
---|
304 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
305 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
306 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
307 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
308 | DEBUG: universal variant already exists, so not adding the default one |
---|
309 | DEBUG: Requested variant darwin is not provided by port getopt. |
---|
310 | DEBUG: Requested variant i386 is not provided by port getopt. |
---|
311 | DEBUG: Requested variant macosx is not provided by port getopt. |
---|
312 | DEBUG: No need to upgrade! getopt 1.1.4_1 >= getopt 1.1.4_1 |
---|
313 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libpaper |
---|
314 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
315 | DEBUG: libpaper 1.1.21_1 exists in the ports tree |
---|
316 | DEBUG: libpaper 1.1.21_1 is the latest installed |
---|
317 | DEBUG: libpaper 1.1.21_1 is active |
---|
318 | DEBUG: Merging existing variants into variants |
---|
319 | DEBUG: new fully merged portvariants: |
---|
320 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/libpaper |
---|
321 | DEBUG: OS Platform: darwin |
---|
322 | DEBUG: OS Version: 10.2.0 |
---|
323 | DEBUG: Mac OS X Version: 10.6 |
---|
324 | DEBUG: System Arch: i386 |
---|
325 | DEBUG: setting option os.universal_supported to yes |
---|
326 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
327 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
328 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
329 | DEBUG: adding the default universal variant |
---|
330 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
331 | DEBUG: Requested variant darwin is not provided by port libpaper. |
---|
332 | DEBUG: Requested variant i386 is not provided by port libpaper. |
---|
333 | DEBUG: Requested variant macosx is not provided by port libpaper. |
---|
334 | DEBUG: No need to upgrade! libpaper 1.1.21_1 >= libpaper 1.1.21_1 |
---|
335 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive |
---|
336 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
337 | DEBUG: texlive 2007_6 exists in the ports tree |
---|
338 | DEBUG: texlive 2007_6 is the latest installed |
---|
339 | DEBUG: texlive 2007_6 is active |
---|
340 | DEBUG: Merging existing variants into variants |
---|
341 | DEBUG: new fully merged portvariants: |
---|
342 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive |
---|
343 | DEBUG: OS Platform: darwin |
---|
344 | DEBUG: OS Version: 10.2.0 |
---|
345 | DEBUG: Mac OS X Version: 10.6 |
---|
346 | DEBUG: System Arch: i386 |
---|
347 | DEBUG: setting option os.universal_supported to yes |
---|
348 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
349 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
350 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
351 | DEBUG: not using configure, so not adding the default universal variant |
---|
352 | DEBUG: Requested variant darwin is not provided by port texlive. |
---|
353 | DEBUG: Requested variant i386 is not provided by port texlive. |
---|
354 | DEBUG: Requested variant macosx is not provided by port texlive. |
---|
355 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_base |
---|
356 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
357 | DEBUG: texlive_base 2007_7 exists in the ports tree |
---|
358 | DEBUG: texlive_base 2007_7 +motif is the latest installed |
---|
359 | DEBUG: texlive_base 2007_7 +motif is active |
---|
360 | DEBUG: Merging existing variants motif into variants |
---|
361 | DEBUG: new fully merged portvariants: motif + |
---|
362 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_base |
---|
363 | DEBUG: OS Platform: darwin |
---|
364 | DEBUG: OS Version: 10.2.0 |
---|
365 | DEBUG: Mac OS X Version: 10.6 |
---|
366 | DEBUG: System Arch: i386 |
---|
367 | DEBUG: setting option os.universal_supported to yes |
---|
368 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
369 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
370 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
371 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
372 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
373 | DEBUG: Requested variant darwin is not provided by port texlive_base. |
---|
374 | DEBUG: Requested variant i386 is not provided by port texlive_base. |
---|
375 | DEBUG: Requested variant macosx is not provided by port texlive_base. |
---|
376 | DEBUG: Executing variant motif provides motif |
---|
377 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
378 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
379 | DEBUG: perl5 5.8.9_0 exists in the ports tree |
---|
380 | DEBUG: perl5 5.8.9_0 is the latest installed |
---|
381 | DEBUG: perl5 5.8.9_0 is active |
---|
382 | DEBUG: Merging existing variants into variants |
---|
383 | DEBUG: new fully merged portvariants: |
---|
384 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
385 | DEBUG: OS Platform: darwin |
---|
386 | DEBUG: OS Version: 10.2.0 |
---|
387 | DEBUG: Mac OS X Version: 10.6 |
---|
388 | DEBUG: System Arch: i386 |
---|
389 | DEBUG: setting option os.universal_supported to yes |
---|
390 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
391 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
392 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
393 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
394 | DEBUG: Requested variant darwin is not provided by port perl5. |
---|
395 | DEBUG: Requested variant i386 is not provided by port perl5. |
---|
396 | DEBUG: Requested variant macosx is not provided by port perl5. |
---|
397 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
398 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
399 | DEBUG: perl5.8 5.8.9_3 exists in the ports tree |
---|
400 | DEBUG: perl5.8 5.8.9_3 is the latest installed |
---|
401 | DEBUG: perl5.8 5.8.9_3 is active |
---|
402 | DEBUG: Merging existing variants into variants |
---|
403 | DEBUG: new fully merged portvariants: |
---|
404 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
405 | DEBUG: OS Platform: darwin |
---|
406 | DEBUG: OS Version: 10.2.0 |
---|
407 | DEBUG: Mac OS X Version: 10.6 |
---|
408 | DEBUG: System Arch: i386 |
---|
409 | DEBUG: setting option os.universal_supported to yes |
---|
410 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
411 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
412 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
413 | DEBUG: adding the default universal variant |
---|
414 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
415 | DEBUG: Requested variant darwin is not provided by port perl5.8. |
---|
416 | DEBUG: Requested variant i386 is not provided by port perl5.8. |
---|
417 | DEBUG: Requested variant macosx is not provided by port perl5.8. |
---|
418 | DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
---|
419 | DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
---|
420 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
---|
421 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
422 | DEBUG: freetype 2.3.11_1 exists in the ports tree |
---|
423 | DEBUG: freetype 2.3.11_1 +macosx is the latest installed |
---|
424 | DEBUG: freetype 2.3.11_1 +macosx is active |
---|
425 | DEBUG: Merging existing variants macosx into variants |
---|
426 | DEBUG: new fully merged portvariants: |
---|
427 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype |
---|
428 | DEBUG: OS Platform: darwin |
---|
429 | DEBUG: OS Version: 10.2.0 |
---|
430 | DEBUG: Mac OS X Version: 10.6 |
---|
431 | DEBUG: System Arch: i386 |
---|
432 | DEBUG: setting option os.universal_supported to yes |
---|
433 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
434 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
435 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
436 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
437 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
438 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
439 | DEBUG: universal variant already exists, so not adding the default one |
---|
440 | DEBUG: Requested variant darwin is not provided by port freetype. |
---|
441 | DEBUG: Requested variant i386 is not provided by port freetype. |
---|
442 | DEBUG: Executing variant macosx provides macosx |
---|
443 | DEBUG: No need to upgrade! freetype 2.3.11_1 >= freetype 2.3.11_1 |
---|
444 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
---|
445 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
446 | DEBUG: fontconfig 2.8.0_0 exists in the ports tree |
---|
447 | DEBUG: fontconfig 2.8.0_0 +macosx is the latest installed |
---|
448 | DEBUG: fontconfig 2.8.0_0 +macosx is active |
---|
449 | DEBUG: Merging existing variants macosx into variants |
---|
450 | DEBUG: new fully merged portvariants: |
---|
451 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig |
---|
452 | DEBUG: OS Platform: darwin |
---|
453 | DEBUG: OS Version: 10.2.0 |
---|
454 | DEBUG: Mac OS X Version: 10.6 |
---|
455 | DEBUG: System Arch: i386 |
---|
456 | DEBUG: setting option os.universal_supported to yes |
---|
457 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
458 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
459 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
460 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
461 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
462 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
463 | DEBUG: universal variant already exists, so not adding the default one |
---|
464 | DEBUG: Requested variant darwin is not provided by port fontconfig. |
---|
465 | DEBUG: Requested variant i386 is not provided by port fontconfig. |
---|
466 | DEBUG: Executing variant macosx provides macosx |
---|
467 | DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 |
---|
468 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
---|
469 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
470 | DEBUG: libpng 1.2.42_0 exists in the ports tree |
---|
471 | DEBUG: libpng 1.2.42_0 is the latest installed |
---|
472 | DEBUG: libpng 1.2.42_0 is active |
---|
473 | DEBUG: Merging existing variants into variants |
---|
474 | DEBUG: new fully merged portvariants: |
---|
475 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng |
---|
476 | DEBUG: OS Platform: darwin |
---|
477 | DEBUG: OS Version: 10.2.0 |
---|
478 | DEBUG: Mac OS X Version: 10.6 |
---|
479 | DEBUG: System Arch: i386 |
---|
480 | DEBUG: setting option os.universal_supported to yes |
---|
481 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
482 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
483 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
484 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
485 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
486 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
487 | DEBUG: universal variant already exists, so not adding the default one |
---|
488 | DEBUG: Requested variant darwin is not provided by port libpng. |
---|
489 | DEBUG: Requested variant i386 is not provided by port libpng. |
---|
490 | DEBUG: Requested variant macosx is not provided by port libpng. |
---|
491 | DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0 |
---|
492 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo |
---|
493 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
494 | DEBUG: texinfo 4.13_0 exists in the ports tree |
---|
495 | DEBUG: texinfo 4.13_0 is the latest installed |
---|
496 | DEBUG: texinfo 4.13_0 is active |
---|
497 | DEBUG: Merging existing variants into variants |
---|
498 | DEBUG: new fully merged portvariants: |
---|
499 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo |
---|
500 | DEBUG: OS Platform: darwin |
---|
501 | DEBUG: OS Version: 10.2.0 |
---|
502 | DEBUG: Mac OS X Version: 10.6 |
---|
503 | DEBUG: System Arch: i386 |
---|
504 | DEBUG: setting option os.universal_supported to yes |
---|
505 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
506 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
507 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
508 | DEBUG: adding the default universal variant |
---|
509 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
510 | DEBUG: Requested variant darwin is not provided by port texinfo. |
---|
511 | DEBUG: Requested variant i386 is not provided by port texinfo. |
---|
512 | DEBUG: Requested variant macosx is not provided by port texinfo. |
---|
513 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
---|
514 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
515 | DEBUG: lzmautils 4.32.7_1 exists in the ports tree |
---|
516 | DEBUG: lzmautils 4.32.7_1 is the latest installed |
---|
517 | DEBUG: lzmautils 4.32.7_1 is active |
---|
518 | DEBUG: Merging existing variants into variants |
---|
519 | DEBUG: new fully merged portvariants: |
---|
520 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils |
---|
521 | DEBUG: OS Platform: darwin |
---|
522 | DEBUG: OS Version: 10.2.0 |
---|
523 | DEBUG: Mac OS X Version: 10.6 |
---|
524 | DEBUG: System Arch: i386 |
---|
525 | DEBUG: setting option os.universal_supported to yes |
---|
526 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
527 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
528 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
529 | DEBUG: adding the default universal variant |
---|
530 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
531 | DEBUG: Requested variant darwin is not provided by port lzmautils. |
---|
532 | DEBUG: Requested variant i386 is not provided by port lzmautils. |
---|
533 | DEBUG: Requested variant macosx is not provided by port lzmautils. |
---|
534 | DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 |
---|
535 | DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0 |
---|
536 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texi2html |
---|
537 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
538 | DEBUG: texi2html 1.82_0 exists in the ports tree |
---|
539 | DEBUG: texi2html 1.82_0 is the latest installed |
---|
540 | DEBUG: texi2html 1.82_0 is active |
---|
541 | DEBUG: Merging existing variants into variants |
---|
542 | DEBUG: new fully merged portvariants: |
---|
543 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texi2html |
---|
544 | DEBUG: OS Platform: darwin |
---|
545 | DEBUG: OS Version: 10.2.0 |
---|
546 | DEBUG: Mac OS X Version: 10.6 |
---|
547 | DEBUG: System Arch: i386 |
---|
548 | DEBUG: setting option os.universal_supported to yes |
---|
549 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
550 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
551 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
552 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
553 | DEBUG: Requested variant darwin is not provided by port texi2html. |
---|
554 | DEBUG: Requested variant i386 is not provided by port texi2html. |
---|
555 | DEBUG: Requested variant macosx is not provided by port texi2html. |
---|
556 | DEBUG: No need to upgrade! texi2html 1.82_0 >= texi2html 1.82_0 |
---|
557 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript |
---|
558 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
559 | DEBUG: ghostscript 8.70_1 exists in the ports tree |
---|
560 | DEBUG: ghostscript 8.70_1 is the latest installed |
---|
561 | DEBUG: ghostscript 8.70_1 is active |
---|
562 | DEBUG: Merging existing variants into variants |
---|
563 | DEBUG: new fully merged portvariants: |
---|
564 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript |
---|
565 | DEBUG: OS Platform: darwin |
---|
566 | DEBUG: OS Version: 10.2.0 |
---|
567 | DEBUG: Mac OS X Version: 10.6 |
---|
568 | DEBUG: System Arch: i386 |
---|
569 | DEBUG: setting option os.universal_supported to yes |
---|
570 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
571 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
572 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
573 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
574 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
575 | DEBUG: Requested variant darwin is not provided by port ghostscript. |
---|
576 | DEBUG: Requested variant i386 is not provided by port ghostscript. |
---|
577 | DEBUG: Requested variant macosx is not provided by port ghostscript. |
---|
578 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
---|
579 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
580 | DEBUG: autoconf 2.65_1 exists in the ports tree |
---|
581 | DEBUG: autoconf 2.65_1 is the latest installed |
---|
582 | DEBUG: autoconf 2.65_1 is active |
---|
583 | DEBUG: Merging existing variants into variants |
---|
584 | DEBUG: new fully merged portvariants: |
---|
585 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf |
---|
586 | DEBUG: OS Platform: darwin |
---|
587 | DEBUG: OS Version: 10.2.0 |
---|
588 | DEBUG: Mac OS X Version: 10.6 |
---|
589 | DEBUG: System Arch: i386 |
---|
590 | DEBUG: setting option os.universal_supported to yes |
---|
591 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
592 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
593 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
594 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
595 | DEBUG: Requested variant darwin is not provided by port autoconf. |
---|
596 | DEBUG: Requested variant i386 is not provided by port autoconf. |
---|
597 | DEBUG: Requested variant macosx is not provided by port autoconf. |
---|
598 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
---|
599 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
600 | DEBUG: m4 1.4.13_0 exists in the ports tree |
---|
601 | DEBUG: m4 1.4.13_0 is the latest installed |
---|
602 | DEBUG: m4 1.4.13_0 is active |
---|
603 | DEBUG: Merging existing variants into variants |
---|
604 | DEBUG: new fully merged portvariants: |
---|
605 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 |
---|
606 | DEBUG: OS Platform: darwin |
---|
607 | DEBUG: OS Version: 10.2.0 |
---|
608 | DEBUG: Mac OS X Version: 10.6 |
---|
609 | DEBUG: System Arch: i386 |
---|
610 | DEBUG: setting option os.universal_supported to yes |
---|
611 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
612 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
613 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
614 | DEBUG: adding the default universal variant |
---|
615 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
616 | DEBUG: Requested variant darwin is not provided by port m4. |
---|
617 | DEBUG: Requested variant i386 is not provided by port m4. |
---|
618 | DEBUG: Requested variant macosx is not provided by port m4. |
---|
619 | DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 |
---|
620 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
---|
621 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
622 | DEBUG: help2man 1.37.1_1 exists in the ports tree |
---|
623 | DEBUG: help2man 1.37.1_1 is the latest installed |
---|
624 | DEBUG: help2man 1.37.1_1 is active |
---|
625 | DEBUG: Merging existing variants into variants |
---|
626 | DEBUG: new fully merged portvariants: |
---|
627 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man |
---|
628 | DEBUG: OS Platform: darwin |
---|
629 | DEBUG: OS Version: 10.2.0 |
---|
630 | DEBUG: Mac OS X Version: 10.6 |
---|
631 | DEBUG: System Arch: i386 |
---|
632 | DEBUG: setting option os.universal_supported to yes |
---|
633 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
634 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
635 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
636 | DEBUG: adding the default universal variant |
---|
637 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
638 | DEBUG: Requested variant darwin is not provided by port help2man. |
---|
639 | DEBUG: Requested variant i386 is not provided by port help2man. |
---|
640 | DEBUG: Requested variant macosx is not provided by port help2man. |
---|
641 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
---|
642 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
643 | DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree |
---|
644 | DEBUG: p5-locale-gettext 1.05_2 is the latest installed |
---|
645 | DEBUG: p5-locale-gettext 1.05_2 is active |
---|
646 | DEBUG: Merging existing variants into variants |
---|
647 | DEBUG: new fully merged portvariants: |
---|
648 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext |
---|
649 | DEBUG: OS Platform: darwin |
---|
650 | DEBUG: OS Version: 10.2.0 |
---|
651 | DEBUG: Mac OS X Version: 10.6 |
---|
652 | DEBUG: System Arch: i386 |
---|
653 | DEBUG: setting option os.universal_supported to yes |
---|
654 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
655 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
656 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
657 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl |
---|
658 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
659 | DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. |
---|
660 | DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. |
---|
661 | DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. |
---|
662 | DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 |
---|
663 | DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 |
---|
664 | DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 |
---|
665 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
---|
666 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
667 | DEBUG: automake 1.11.1_0 exists in the ports tree |
---|
668 | DEBUG: automake 1.11.1_0 is the latest installed |
---|
669 | DEBUG: automake 1.11.1_0 is active |
---|
670 | DEBUG: Merging existing variants into variants |
---|
671 | DEBUG: new fully merged portvariants: |
---|
672 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake |
---|
673 | DEBUG: OS Platform: darwin |
---|
674 | DEBUG: OS Version: 10.2.0 |
---|
675 | DEBUG: Mac OS X Version: 10.6 |
---|
676 | DEBUG: System Arch: i386 |
---|
677 | DEBUG: setting option os.universal_supported to yes |
---|
678 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
679 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
680 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
681 | DEBUG: adding the default universal variant |
---|
682 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
683 | DEBUG: Requested variant darwin is not provided by port automake. |
---|
684 | DEBUG: Requested variant i386 is not provided by port automake. |
---|
685 | DEBUG: Requested variant macosx is not provided by port automake. |
---|
686 | DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 |
---|
687 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
---|
688 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
689 | DEBUG: libtool 2.2.6b_0 exists in the ports tree |
---|
690 | DEBUG: libtool 2.2.6b_0 is the latest installed |
---|
691 | DEBUG: libtool 2.2.6b_0 is active |
---|
692 | DEBUG: Merging existing variants into variants |
---|
693 | DEBUG: new fully merged portvariants: |
---|
694 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool |
---|
695 | DEBUG: OS Platform: darwin |
---|
696 | DEBUG: OS Version: 10.2.0 |
---|
697 | DEBUG: Mac OS X Version: 10.6 |
---|
698 | DEBUG: System Arch: i386 |
---|
699 | DEBUG: setting option os.universal_supported to yes |
---|
700 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
701 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
702 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
703 | DEBUG: adding the default universal variant |
---|
704 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
705 | DEBUG: Requested variant darwin is not provided by port libtool. |
---|
706 | DEBUG: Requested variant i386 is not provided by port libtool. |
---|
707 | DEBUG: Requested variant macosx is not provided by port libtool. |
---|
708 | DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 |
---|
709 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
---|
710 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
711 | DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree |
---|
712 | DEBUG: xorg-libXext 1.1.1_0 is the latest installed |
---|
713 | DEBUG: xorg-libXext 1.1.1_0 is active |
---|
714 | DEBUG: Merging existing variants into variants |
---|
715 | DEBUG: new fully merged portvariants: |
---|
716 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext |
---|
717 | DEBUG: OS Platform: darwin |
---|
718 | DEBUG: OS Version: 10.2.0 |
---|
719 | DEBUG: Mac OS X Version: 10.6 |
---|
720 | DEBUG: System Arch: i386 |
---|
721 | DEBUG: setting option os.universal_supported to yes |
---|
722 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
723 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
724 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
725 | DEBUG: adding the default universal variant |
---|
726 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
727 | DEBUG: Requested variant darwin is not provided by port xorg-libXext. |
---|
728 | DEBUG: Requested variant i386 is not provided by port xorg-libXext. |
---|
729 | DEBUG: Requested variant macosx is not provided by port xorg-libXext. |
---|
730 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
---|
731 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
732 | DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree |
---|
733 | DEBUG: xorg-libX11 1.3.3_0 is the latest installed |
---|
734 | DEBUG: xorg-libX11 1.3.3_0 is active |
---|
735 | DEBUG: Merging existing variants into variants |
---|
736 | DEBUG: new fully merged portvariants: |
---|
737 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 |
---|
738 | DEBUG: OS Platform: darwin |
---|
739 | DEBUG: OS Version: 10.2.0 |
---|
740 | DEBUG: Mac OS X Version: 10.6 |
---|
741 | DEBUG: System Arch: i386 |
---|
742 | DEBUG: setting option os.universal_supported to yes |
---|
743 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
744 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
745 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
746 | DEBUG: adding the default universal variant |
---|
747 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
748 | DEBUG: Requested variant darwin is not provided by port xorg-libX11. |
---|
749 | DEBUG: Requested variant i386 is not provided by port xorg-libX11. |
---|
750 | DEBUG: Requested variant macosx is not provided by port xorg-libX11. |
---|
751 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
---|
752 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
753 | DEBUG: xorg-util-macros 1.5.0_0 exists in the ports tree |
---|
754 | DEBUG: xorg-util-macros 1.5.0_0 is the latest installed |
---|
755 | DEBUG: xorg-util-macros 1.5.0_0 is active |
---|
756 | DEBUG: Merging existing variants into variants |
---|
757 | DEBUG: new fully merged portvariants: |
---|
758 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros |
---|
759 | DEBUG: OS Platform: darwin |
---|
760 | DEBUG: OS Version: 10.2.0 |
---|
761 | DEBUG: Mac OS X Version: 10.6 |
---|
762 | DEBUG: System Arch: i386 |
---|
763 | DEBUG: setting option os.universal_supported to yes |
---|
764 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
765 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
766 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
767 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
768 | DEBUG: Requested variant darwin is not provided by port xorg-util-macros. |
---|
769 | DEBUG: Requested variant i386 is not provided by port xorg-util-macros. |
---|
770 | DEBUG: Requested variant macosx is not provided by port xorg-util-macros. |
---|
771 | DEBUG: No need to upgrade! xorg-util-macros 1.5.0_0 >= xorg-util-macros 1.5.0_0 |
---|
772 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
---|
773 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
774 | DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree |
---|
775 | DEBUG: xorg-xtrans 1.2.5_0 is the latest installed |
---|
776 | DEBUG: xorg-xtrans 1.2.5_0 is active |
---|
777 | DEBUG: Merging existing variants into variants |
---|
778 | DEBUG: new fully merged portvariants: |
---|
779 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans |
---|
780 | DEBUG: OS Platform: darwin |
---|
781 | DEBUG: OS Version: 10.2.0 |
---|
782 | DEBUG: Mac OS X Version: 10.6 |
---|
783 | DEBUG: System Arch: i386 |
---|
784 | DEBUG: setting option os.universal_supported to yes |
---|
785 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
786 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
787 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
788 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
789 | DEBUG: Requested variant darwin is not provided by port xorg-xtrans. |
---|
790 | DEBUG: Requested variant i386 is not provided by port xorg-xtrans. |
---|
791 | DEBUG: Requested variant macosx is not provided by port xorg-xtrans. |
---|
792 | DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 |
---|
793 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
---|
794 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
795 | DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree |
---|
796 | DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed |
---|
797 | DEBUG: xorg-bigreqsproto 1.1.0_0 is active |
---|
798 | DEBUG: Merging existing variants into variants |
---|
799 | DEBUG: new fully merged portvariants: |
---|
800 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto |
---|
801 | DEBUG: OS Platform: darwin |
---|
802 | DEBUG: OS Version: 10.2.0 |
---|
803 | DEBUG: Mac OS X Version: 10.6 |
---|
804 | DEBUG: System Arch: i386 |
---|
805 | DEBUG: setting option os.universal_supported to yes |
---|
806 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
807 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
808 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
809 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
810 | DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. |
---|
811 | DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. |
---|
812 | DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. |
---|
813 | DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 |
---|
814 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
---|
815 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
816 | DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree |
---|
817 | DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed |
---|
818 | DEBUG: xorg-xcmiscproto 1.2.0_0 is active |
---|
819 | DEBUG: Merging existing variants into variants |
---|
820 | DEBUG: new fully merged portvariants: |
---|
821 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto |
---|
822 | DEBUG: OS Platform: darwin |
---|
823 | DEBUG: OS Version: 10.2.0 |
---|
824 | DEBUG: Mac OS X Version: 10.6 |
---|
825 | DEBUG: System Arch: i386 |
---|
826 | DEBUG: setting option os.universal_supported to yes |
---|
827 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
828 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
829 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
830 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
831 | DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. |
---|
832 | DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. |
---|
833 | DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. |
---|
834 | DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 |
---|
835 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
---|
836 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
837 | DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree |
---|
838 | DEBUG: xorg-xextproto 7.1.1_0 is the latest installed |
---|
839 | DEBUG: xorg-xextproto 7.1.1_0 is active |
---|
840 | DEBUG: Merging existing variants into variants |
---|
841 | DEBUG: new fully merged portvariants: |
---|
842 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto |
---|
843 | DEBUG: OS Platform: darwin |
---|
844 | DEBUG: OS Version: 10.2.0 |
---|
845 | DEBUG: Mac OS X Version: 10.6 |
---|
846 | DEBUG: System Arch: i386 |
---|
847 | DEBUG: setting option os.universal_supported to yes |
---|
848 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
849 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
850 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
851 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
852 | DEBUG: Requested variant darwin is not provided by port xorg-xextproto. |
---|
853 | DEBUG: Requested variant i386 is not provided by port xorg-xextproto. |
---|
854 | DEBUG: Requested variant macosx is not provided by port xorg-xextproto. |
---|
855 | DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 |
---|
856 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
---|
857 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
858 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree |
---|
859 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed |
---|
860 | DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active |
---|
861 | DEBUG: Merging existing variants into variants |
---|
862 | DEBUG: new fully merged portvariants: |
---|
863 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto |
---|
864 | DEBUG: OS Platform: darwin |
---|
865 | DEBUG: OS Version: 10.2.0 |
---|
866 | DEBUG: Mac OS X Version: 10.6 |
---|
867 | DEBUG: System Arch: i386 |
---|
868 | DEBUG: setting option os.universal_supported to yes |
---|
869 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
870 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
871 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
872 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
873 | DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. |
---|
874 | DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. |
---|
875 | DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. |
---|
876 | DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 |
---|
877 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
---|
878 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
879 | DEBUG: xorg-inputproto 2.0_0 exists in the ports tree |
---|
880 | DEBUG: xorg-inputproto 2.0_0 is the latest installed |
---|
881 | DEBUG: xorg-inputproto 2.0_0 is active |
---|
882 | DEBUG: Merging existing variants into variants |
---|
883 | DEBUG: new fully merged portvariants: |
---|
884 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto |
---|
885 | DEBUG: OS Platform: darwin |
---|
886 | DEBUG: OS Version: 10.2.0 |
---|
887 | DEBUG: Mac OS X Version: 10.6 |
---|
888 | DEBUG: System Arch: i386 |
---|
889 | DEBUG: setting option os.universal_supported to yes |
---|
890 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
891 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
892 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
893 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
894 | DEBUG: Requested variant darwin is not provided by port xorg-inputproto. |
---|
895 | DEBUG: Requested variant i386 is not provided by port xorg-inputproto. |
---|
896 | DEBUG: Requested variant macosx is not provided by port xorg-inputproto. |
---|
897 | DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 |
---|
898 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
---|
899 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
900 | DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree |
---|
901 | DEBUG: xorg-libXdmcp 1.0.3_0 is the latest installed |
---|
902 | DEBUG: xorg-libXdmcp 1.0.3_0 is active |
---|
903 | DEBUG: Merging existing variants into variants |
---|
904 | DEBUG: new fully merged portvariants: |
---|
905 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp |
---|
906 | DEBUG: OS Platform: darwin |
---|
907 | DEBUG: OS Version: 10.2.0 |
---|
908 | DEBUG: Mac OS X Version: 10.6 |
---|
909 | DEBUG: System Arch: i386 |
---|
910 | DEBUG: setting option os.universal_supported to yes |
---|
911 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
912 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
913 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
914 | DEBUG: adding the default universal variant |
---|
915 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
916 | DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. |
---|
917 | DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. |
---|
918 | DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. |
---|
919 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
---|
920 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
921 | DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree |
---|
922 | DEBUG: xorg-xproto 7.0.16_0 is the latest installed |
---|
923 | DEBUG: xorg-xproto 7.0.16_0 is active |
---|
924 | DEBUG: Merging existing variants into variants |
---|
925 | DEBUG: new fully merged portvariants: |
---|
926 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto |
---|
927 | DEBUG: OS Platform: darwin |
---|
928 | DEBUG: OS Version: 10.2.0 |
---|
929 | DEBUG: Mac OS X Version: 10.6 |
---|
930 | DEBUG: System Arch: i386 |
---|
931 | DEBUG: setting option os.universal_supported to yes |
---|
932 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
933 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
934 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
935 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
936 | DEBUG: Requested variant darwin is not provided by port xorg-xproto. |
---|
937 | DEBUG: Requested variant i386 is not provided by port xorg-xproto. |
---|
938 | DEBUG: Requested variant macosx is not provided by port xorg-xproto. |
---|
939 | DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 |
---|
940 | DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 |
---|
941 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
---|
942 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
943 | DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree |
---|
944 | DEBUG: xorg-libXau 1.0.5_0 is the latest installed |
---|
945 | DEBUG: xorg-libXau 1.0.5_0 is active |
---|
946 | DEBUG: Merging existing variants into variants |
---|
947 | DEBUG: new fully merged portvariants: |
---|
948 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau |
---|
949 | DEBUG: OS Platform: darwin |
---|
950 | DEBUG: OS Version: 10.2.0 |
---|
951 | DEBUG: Mac OS X Version: 10.6 |
---|
952 | DEBUG: System Arch: i386 |
---|
953 | DEBUG: setting option os.universal_supported to yes |
---|
954 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
955 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
956 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
957 | DEBUG: adding the default universal variant |
---|
958 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
959 | DEBUG: Requested variant darwin is not provided by port xorg-libXau. |
---|
960 | DEBUG: Requested variant i386 is not provided by port xorg-libXau. |
---|
961 | DEBUG: Requested variant macosx is not provided by port xorg-libXau. |
---|
962 | DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 |
---|
963 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
---|
964 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
965 | DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree |
---|
966 | DEBUG: xorg-kbproto 1.0.4_0 is the latest installed |
---|
967 | DEBUG: xorg-kbproto 1.0.4_0 is active |
---|
968 | DEBUG: Merging existing variants into variants |
---|
969 | DEBUG: new fully merged portvariants: |
---|
970 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto |
---|
971 | DEBUG: OS Platform: darwin |
---|
972 | DEBUG: OS Version: 10.2.0 |
---|
973 | DEBUG: Mac OS X Version: 10.6 |
---|
974 | DEBUG: System Arch: i386 |
---|
975 | DEBUG: setting option os.universal_supported to yes |
---|
976 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
977 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
978 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
979 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
980 | DEBUG: Requested variant darwin is not provided by port xorg-kbproto. |
---|
981 | DEBUG: Requested variant i386 is not provided by port xorg-kbproto. |
---|
982 | DEBUG: Requested variant macosx is not provided by port xorg-kbproto. |
---|
983 | DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 |
---|
984 | DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 |
---|
985 | DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 |
---|
986 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
---|
987 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
988 | DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree |
---|
989 | DEBUG: xorg-libXt 1.0.7_1 is the latest installed |
---|
990 | DEBUG: xorg-libXt 1.0.7_1 is active |
---|
991 | DEBUG: Merging existing variants into variants |
---|
992 | DEBUG: new fully merged portvariants: |
---|
993 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt |
---|
994 | DEBUG: OS Platform: darwin |
---|
995 | DEBUG: OS Version: 10.2.0 |
---|
996 | DEBUG: Mac OS X Version: 10.6 |
---|
997 | DEBUG: System Arch: i386 |
---|
998 | DEBUG: setting option os.universal_supported to yes |
---|
999 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1000 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1001 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1002 | DEBUG: adding the default universal variant |
---|
1003 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1004 | DEBUG: Requested variant darwin is not provided by port xorg-libXt. |
---|
1005 | DEBUG: Requested variant i386 is not provided by port xorg-libXt. |
---|
1006 | DEBUG: Requested variant macosx is not provided by port xorg-libXt. |
---|
1007 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
---|
1008 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1009 | DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree |
---|
1010 | DEBUG: xorg-libsm 1.1.1_0 is the latest installed |
---|
1011 | DEBUG: xorg-libsm 1.1.1_0 is active |
---|
1012 | DEBUG: Merging existing variants into variants |
---|
1013 | DEBUG: new fully merged portvariants: |
---|
1014 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm |
---|
1015 | DEBUG: OS Platform: darwin |
---|
1016 | DEBUG: OS Version: 10.2.0 |
---|
1017 | DEBUG: Mac OS X Version: 10.6 |
---|
1018 | DEBUG: System Arch: i386 |
---|
1019 | DEBUG: setting option os.universal_supported to yes |
---|
1020 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1021 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1022 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1023 | DEBUG: adding the default universal variant |
---|
1024 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1025 | DEBUG: Requested variant darwin is not provided by port xorg-libsm. |
---|
1026 | DEBUG: Requested variant i386 is not provided by port xorg-libsm. |
---|
1027 | DEBUG: Requested variant macosx is not provided by port xorg-libsm. |
---|
1028 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
---|
1029 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1030 | DEBUG: xorg-libice 1.0.6_0 exists in the ports tree |
---|
1031 | DEBUG: xorg-libice 1.0.6_0 is the latest installed |
---|
1032 | DEBUG: xorg-libice 1.0.6_0 is active |
---|
1033 | DEBUG: Merging existing variants into variants |
---|
1034 | DEBUG: new fully merged portvariants: |
---|
1035 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice |
---|
1036 | DEBUG: OS Platform: darwin |
---|
1037 | DEBUG: OS Version: 10.2.0 |
---|
1038 | DEBUG: Mac OS X Version: 10.6 |
---|
1039 | DEBUG: System Arch: i386 |
---|
1040 | DEBUG: setting option os.universal_supported to yes |
---|
1041 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1042 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1043 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1044 | DEBUG: adding the default universal variant |
---|
1045 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1046 | DEBUG: Requested variant darwin is not provided by port xorg-libice. |
---|
1047 | DEBUG: Requested variant i386 is not provided by port xorg-libice. |
---|
1048 | DEBUG: Requested variant macosx is not provided by port xorg-libice. |
---|
1049 | DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 |
---|
1050 | DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 |
---|
1051 | DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1 |
---|
1052 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
---|
1053 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1054 | DEBUG: cairo 1.8.8_0 exists in the ports tree |
---|
1055 | DEBUG: cairo 1.8.8_0 +macosx is the latest installed |
---|
1056 | DEBUG: cairo 1.8.8_0 +macosx is active |
---|
1057 | DEBUG: Merging existing variants macosx into variants |
---|
1058 | DEBUG: new fully merged portvariants: |
---|
1059 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo |
---|
1060 | DEBUG: OS Platform: darwin |
---|
1061 | DEBUG: OS Version: 10.2.0 |
---|
1062 | DEBUG: Mac OS X Version: 10.6 |
---|
1063 | DEBUG: System Arch: i386 |
---|
1064 | DEBUG: setting option os.universal_supported to yes |
---|
1065 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1066 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1067 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1068 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
1069 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1070 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
1071 | DEBUG: universal variant already exists, so not adding the default one |
---|
1072 | DEBUG: Requested variant darwin is not provided by port cairo. |
---|
1073 | DEBUG: Requested variant i386 is not provided by port cairo. |
---|
1074 | DEBUG: Executing variant macosx provides macosx |
---|
1075 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
---|
1076 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1077 | DEBUG: libpixman 0.16.4_0 exists in the ports tree |
---|
1078 | DEBUG: libpixman 0.16.4_0 is the latest installed |
---|
1079 | DEBUG: libpixman 0.16.4_0 is active |
---|
1080 | DEBUG: Merging existing variants into variants |
---|
1081 | DEBUG: new fully merged portvariants: |
---|
1082 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman |
---|
1083 | DEBUG: OS Platform: darwin |
---|
1084 | DEBUG: OS Version: 10.2.0 |
---|
1085 | DEBUG: Mac OS X Version: 10.6 |
---|
1086 | DEBUG: System Arch: i386 |
---|
1087 | DEBUG: setting option os.universal_supported to yes |
---|
1088 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1089 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1090 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1091 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
1092 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1093 | DEBUG: universal variant already exists, so not adding the default one |
---|
1094 | DEBUG: Requested variant darwin is not provided by port libpixman. |
---|
1095 | DEBUG: Requested variant i386 is not provided by port libpixman. |
---|
1096 | DEBUG: Requested variant macosx is not provided by port libpixman. |
---|
1097 | DEBUG: No need to upgrade! libpixman 0.16.4_0 >= libpixman 0.16.4_0 |
---|
1098 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
---|
1099 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1100 | DEBUG: xrender 0.9.5_0 exists in the ports tree |
---|
1101 | DEBUG: xrender 0.9.5_0 is the latest installed |
---|
1102 | DEBUG: xrender 0.9.5_0 is active |
---|
1103 | DEBUG: Merging existing variants into variants |
---|
1104 | DEBUG: new fully merged portvariants: |
---|
1105 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender |
---|
1106 | DEBUG: OS Platform: darwin |
---|
1107 | DEBUG: OS Version: 10.2.0 |
---|
1108 | DEBUG: Mac OS X Version: 10.6 |
---|
1109 | DEBUG: System Arch: i386 |
---|
1110 | DEBUG: setting option os.universal_supported to yes |
---|
1111 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1112 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1113 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1114 | DEBUG: adding the default universal variant |
---|
1115 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1116 | DEBUG: Requested variant darwin is not provided by port xrender. |
---|
1117 | DEBUG: Requested variant i386 is not provided by port xrender. |
---|
1118 | DEBUG: Requested variant macosx is not provided by port xrender. |
---|
1119 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
---|
1120 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1121 | DEBUG: xorg-renderproto 0.11_0 exists in the ports tree |
---|
1122 | DEBUG: xorg-renderproto 0.11_0 is the latest installed |
---|
1123 | DEBUG: xorg-renderproto 0.11_0 is active |
---|
1124 | DEBUG: Merging existing variants into variants |
---|
1125 | DEBUG: new fully merged portvariants: |
---|
1126 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto |
---|
1127 | DEBUG: OS Platform: darwin |
---|
1128 | DEBUG: OS Version: 10.2.0 |
---|
1129 | DEBUG: Mac OS X Version: 10.6 |
---|
1130 | DEBUG: System Arch: i386 |
---|
1131 | DEBUG: setting option os.universal_supported to yes |
---|
1132 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1133 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1134 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1135 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1136 | DEBUG: Requested variant darwin is not provided by port xorg-renderproto. |
---|
1137 | DEBUG: Requested variant i386 is not provided by port xorg-renderproto. |
---|
1138 | DEBUG: Requested variant macosx is not provided by port xorg-renderproto. |
---|
1139 | DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 |
---|
1140 | DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 |
---|
1141 | DEBUG: No need to upgrade! cairo 1.8.8_0 >= cairo 1.8.8_0 |
---|
1142 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
---|
1143 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1144 | DEBUG: jpeg 7_0 exists in the ports tree |
---|
1145 | DEBUG: jpeg 7_0 is the latest installed |
---|
1146 | DEBUG: jpeg 7_0 is active |
---|
1147 | DEBUG: Merging existing variants into variants |
---|
1148 | DEBUG: new fully merged portvariants: |
---|
1149 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg |
---|
1150 | DEBUG: OS Platform: darwin |
---|
1151 | DEBUG: OS Version: 10.2.0 |
---|
1152 | DEBUG: Mac OS X Version: 10.6 |
---|
1153 | DEBUG: System Arch: i386 |
---|
1154 | DEBUG: setting option os.universal_supported to yes |
---|
1155 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1156 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1157 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1158 | DEBUG: adding the default universal variant |
---|
1159 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1160 | DEBUG: Requested variant darwin is not provided by port jpeg. |
---|
1161 | DEBUG: Requested variant i386 is not provided by port jpeg. |
---|
1162 | DEBUG: Requested variant macosx is not provided by port jpeg. |
---|
1163 | DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0 |
---|
1164 | DEBUG: No need to upgrade! ghostscript 8.70_1 >= ghostscript 8.70_1 |
---|
1165 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-minimal |
---|
1166 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1167 | DEBUG: texlive_texmf-minimal 2007_3 exists in the ports tree |
---|
1168 | DEBUG: texlive_texmf-minimal 2007_3 is the latest installed |
---|
1169 | DEBUG: texlive_texmf-minimal 2007_3 is active |
---|
1170 | DEBUG: Merging existing variants into variants |
---|
1171 | DEBUG: new fully merged portvariants: |
---|
1172 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-minimal |
---|
1173 | DEBUG: OS Platform: darwin |
---|
1174 | DEBUG: OS Version: 10.2.0 |
---|
1175 | DEBUG: Mac OS X Version: 10.6 |
---|
1176 | DEBUG: System Arch: i386 |
---|
1177 | DEBUG: setting option os.universal_supported to yes |
---|
1178 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1179 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1180 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1181 | DEBUG: not using configure, so not adding the default universal variant |
---|
1182 | DEBUG: Requested variant darwin is not provided by port texlive_texmf-minimal. |
---|
1183 | DEBUG: Requested variant i386 is not provided by port texlive_texmf-minimal. |
---|
1184 | DEBUG: Requested variant macosx is not provided by port texlive_texmf-minimal. |
---|
1185 | DEBUG: No need to upgrade! texlive_texmf-minimal 2007_3 >= texlive_texmf-minimal 2007_3 |
---|
1186 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-full |
---|
1187 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1188 | DEBUG: texlive_texmf-full 2007_4 exists in the ports tree |
---|
1189 | DEBUG: texlive_texmf-full 2007_4 is the latest installed |
---|
1190 | DEBUG: texlive_texmf-full 2007_4 is active |
---|
1191 | DEBUG: Merging existing variants into variants |
---|
1192 | DEBUG: new fully merged portvariants: |
---|
1193 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/tex/texlive_texmf-full |
---|
1194 | DEBUG: OS Platform: darwin |
---|
1195 | DEBUG: OS Version: 10.2.0 |
---|
1196 | DEBUG: Mac OS X Version: 10.6 |
---|
1197 | DEBUG: System Arch: i386 |
---|
1198 | DEBUG: setting option os.universal_supported to yes |
---|
1199 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1200 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1201 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1202 | DEBUG: not using configure, so not adding the default universal variant |
---|
1203 | DEBUG: Requested variant darwin is not provided by port texlive_texmf-full. |
---|
1204 | DEBUG: Requested variant i386 is not provided by port texlive_texmf-full. |
---|
1205 | DEBUG: Requested variant macosx is not provided by port texlive_texmf-full. |
---|
1206 | DEBUG: No need to upgrade! texlive_texmf-full 2007_4 >= texlive_texmf-full 2007_4 |
---|
1207 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp |
---|
1208 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1209 | DEBUG: xorg-libXp 1.0.0_3 exists in the ports tree |
---|
1210 | DEBUG: xorg-libXp 1.0.0_3 is the latest installed |
---|
1211 | DEBUG: xorg-libXp 1.0.0_3 is active |
---|
1212 | DEBUG: Merging existing variants into variants |
---|
1213 | DEBUG: new fully merged portvariants: |
---|
1214 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXp |
---|
1215 | DEBUG: OS Platform: darwin |
---|
1216 | DEBUG: OS Version: 10.2.0 |
---|
1217 | DEBUG: Mac OS X Version: 10.6 |
---|
1218 | DEBUG: System Arch: i386 |
---|
1219 | DEBUG: setting option os.universal_supported to yes |
---|
1220 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1221 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1222 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1223 | DEBUG: adding the default universal variant |
---|
1224 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1225 | DEBUG: Requested variant darwin is not provided by port xorg-libXp. |
---|
1226 | DEBUG: Requested variant i386 is not provided by port xorg-libXp. |
---|
1227 | DEBUG: Requested variant macosx is not provided by port xorg-libXp. |
---|
1228 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
---|
1229 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1230 | DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree |
---|
1231 | DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed |
---|
1232 | DEBUG: xorg-libpthread-stubs 0.3_0 is active |
---|
1233 | DEBUG: Merging existing variants into variants |
---|
1234 | DEBUG: new fully merged portvariants: |
---|
1235 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libpthread-stubs |
---|
1236 | DEBUG: OS Platform: darwin |
---|
1237 | DEBUG: OS Version: 10.2.0 |
---|
1238 | DEBUG: Mac OS X Version: 10.6 |
---|
1239 | DEBUG: System Arch: i386 |
---|
1240 | DEBUG: setting option os.universal_supported to yes |
---|
1241 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1242 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1243 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1244 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1245 | DEBUG: Requested variant darwin is not provided by port xorg-libpthread-stubs. |
---|
1246 | DEBUG: Requested variant i386 is not provided by port xorg-libpthread-stubs. |
---|
1247 | DEBUG: Requested variant macosx is not provided by port xorg-libpthread-stubs. |
---|
1248 | DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread-stubs 0.3_0 |
---|
1249 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto |
---|
1250 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1251 | DEBUG: xorg-printproto 1.0.4_0 exists in the ports tree |
---|
1252 | DEBUG: xorg-printproto 1.0.4_0 is the latest installed |
---|
1253 | DEBUG: xorg-printproto 1.0.4_0 is active |
---|
1254 | DEBUG: Merging existing variants into variants |
---|
1255 | DEBUG: new fully merged portvariants: |
---|
1256 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-printproto |
---|
1257 | DEBUG: OS Platform: darwin |
---|
1258 | DEBUG: OS Version: 10.2.0 |
---|
1259 | DEBUG: Mac OS X Version: 10.6 |
---|
1260 | DEBUG: System Arch: i386 |
---|
1261 | DEBUG: setting option os.universal_supported to yes |
---|
1262 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1263 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1264 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1265 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1266 | DEBUG: Requested variant darwin is not provided by port xorg-printproto. |
---|
1267 | DEBUG: Requested variant i386 is not provided by port xorg-printproto. |
---|
1268 | DEBUG: Requested variant macosx is not provided by port xorg-printproto. |
---|
1269 | DEBUG: No need to upgrade! xorg-printproto 1.0.4_0 >= xorg-printproto 1.0.4_0 |
---|
1270 | DEBUG: No need to upgrade! xorg-libXp 1.0.0_3 >= xorg-libXp 1.0.0_3 |
---|
1271 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif |
---|
1272 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1273 | DEBUG: openmotif 2.3.2_1 exists in the ports tree |
---|
1274 | DEBUG: openmotif 2.3.2_1 is the latest installed |
---|
1275 | DEBUG: openmotif 2.3.2_1 is active |
---|
1276 | DEBUG: Merging existing variants into variants |
---|
1277 | DEBUG: new fully merged portvariants: |
---|
1278 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/openmotif |
---|
1279 | DEBUG: OS Platform: darwin |
---|
1280 | DEBUG: OS Version: 10.2.0 |
---|
1281 | DEBUG: Mac OS X Version: 10.6 |
---|
1282 | DEBUG: System Arch: i386 |
---|
1283 | DEBUG: setting option os.universal_supported to yes |
---|
1284 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1285 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1286 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1287 | DEBUG: adding the default universal variant |
---|
1288 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1289 | DEBUG: Requested variant darwin is not provided by port openmotif. |
---|
1290 | DEBUG: Requested variant i386 is not provided by port openmotif. |
---|
1291 | DEBUG: Requested variant macosx is not provided by port openmotif. |
---|
1292 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps |
---|
1293 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1294 | DEBUG: xbitmaps 1.1.0_0 exists in the ports tree |
---|
1295 | DEBUG: xbitmaps 1.1.0_0 is the latest installed |
---|
1296 | DEBUG: xbitmaps 1.1.0_0 is active |
---|
1297 | DEBUG: Merging existing variants into variants |
---|
1298 | DEBUG: new fully merged portvariants: |
---|
1299 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xbitmaps |
---|
1300 | DEBUG: OS Platform: darwin |
---|
1301 | DEBUG: OS Version: 10.2.0 |
---|
1302 | DEBUG: Mac OS X Version: 10.6 |
---|
1303 | DEBUG: System Arch: i386 |
---|
1304 | DEBUG: setting option os.universal_supported to yes |
---|
1305 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1306 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1307 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1308 | DEBUG: adding the default universal variant |
---|
1309 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1310 | DEBUG: Requested variant darwin is not provided by port xbitmaps. |
---|
1311 | DEBUG: Requested variant i386 is not provided by port xbitmaps. |
---|
1312 | DEBUG: Requested variant macosx is not provided by port xbitmaps. |
---|
1313 | DEBUG: No need to upgrade! xbitmaps 1.1.0_0 >= xbitmaps 1.1.0_0 |
---|
1314 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
---|
1315 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1316 | DEBUG: Xft2 2.1.14_0 exists in the ports tree |
---|
1317 | DEBUG: Xft2 2.1.14_0 is the latest installed |
---|
1318 | DEBUG: Xft2 2.1.14_0 is active |
---|
1319 | DEBUG: Merging existing variants into variants |
---|
1320 | DEBUG: new fully merged portvariants: |
---|
1321 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 |
---|
1322 | DEBUG: OS Platform: darwin |
---|
1323 | DEBUG: OS Version: 10.2.0 |
---|
1324 | DEBUG: Mac OS X Version: 10.6 |
---|
1325 | DEBUG: System Arch: i386 |
---|
1326 | DEBUG: setting option os.universal_supported to yes |
---|
1327 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1328 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1329 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1330 | DEBUG: adding the default universal variant |
---|
1331 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1332 | DEBUG: Requested variant darwin is not provided by port Xft2. |
---|
1333 | DEBUG: Requested variant i386 is not provided by port Xft2. |
---|
1334 | DEBUG: Requested variant macosx is not provided by port Xft2. |
---|
1335 | DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 |
---|
1336 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
---|
1337 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1338 | DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree |
---|
1339 | DEBUG: xorg-libXmu 1.0.5_0 is the latest installed |
---|
1340 | DEBUG: xorg-libXmu 1.0.5_0 is active |
---|
1341 | DEBUG: Merging existing variants into variants |
---|
1342 | DEBUG: new fully merged portvariants: |
---|
1343 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu |
---|
1344 | DEBUG: OS Platform: darwin |
---|
1345 | DEBUG: OS Version: 10.2.0 |
---|
1346 | DEBUG: Mac OS X Version: 10.6 |
---|
1347 | DEBUG: System Arch: i386 |
---|
1348 | DEBUG: setting option os.universal_supported to yes |
---|
1349 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1350 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1351 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1352 | DEBUG: adding the default universal variant |
---|
1353 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1354 | DEBUG: Requested variant darwin is not provided by port xorg-libXmu. |
---|
1355 | DEBUG: Requested variant i386 is not provided by port xorg-libXmu. |
---|
1356 | DEBUG: Requested variant macosx is not provided by port xorg-libXmu. |
---|
1357 | DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 |
---|
1358 | DEBUG: No need to upgrade! openmotif 2.3.2_1 >= openmotif 2.3.2_1 |
---|
1359 | DEBUG: No need to upgrade! texlive_base 2007_7 >= texlive_base 2007_7 |
---|
1360 | DEBUG: No need to upgrade! texlive 2007_6 >= texlive 2007_6 |
---|
1361 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
---|
1362 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1363 | DEBUG: libxml2 2.7.6_0 exists in the ports tree |
---|
1364 | DEBUG: libxml2 2.7.6_0 is the latest installed |
---|
1365 | DEBUG: libxml2 2.7.6_0 is active |
---|
1366 | DEBUG: Merging existing variants into variants |
---|
1367 | DEBUG: new fully merged portvariants: |
---|
1368 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 |
---|
1369 | DEBUG: OS Platform: darwin |
---|
1370 | DEBUG: OS Version: 10.2.0 |
---|
1371 | DEBUG: Mac OS X Version: 10.6 |
---|
1372 | DEBUG: System Arch: i386 |
---|
1373 | DEBUG: setting option os.universal_supported to yes |
---|
1374 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1375 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1376 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1377 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
1378 | DEBUG: adding the default universal variant |
---|
1379 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1380 | DEBUG: Requested variant darwin is not provided by port libxml2. |
---|
1381 | DEBUG: Requested variant i386 is not provided by port libxml2. |
---|
1382 | DEBUG: Requested variant macosx is not provided by port libxml2. |
---|
1383 | DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0 |
---|
1384 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt |
---|
1385 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1386 | DEBUG: libxslt 1.1.26_0 exists in the ports tree |
---|
1387 | DEBUG: libxslt 1.1.26_0 is the latest installed |
---|
1388 | DEBUG: libxslt 1.1.26_0 is active |
---|
1389 | DEBUG: Merging existing variants into variants |
---|
1390 | DEBUG: new fully merged portvariants: |
---|
1391 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt |
---|
1392 | DEBUG: OS Platform: darwin |
---|
1393 | DEBUG: OS Version: 10.2.0 |
---|
1394 | DEBUG: Mac OS X Version: 10.6 |
---|
1395 | DEBUG: System Arch: i386 |
---|
1396 | DEBUG: setting option os.universal_supported to yes |
---|
1397 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1398 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1399 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1400 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
1401 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1402 | DEBUG: universal variant already exists, so not adding the default one |
---|
1403 | DEBUG: Requested variant darwin is not provided by port libxslt. |
---|
1404 | DEBUG: Requested variant i386 is not provided by port libxslt. |
---|
1405 | DEBUG: Requested variant macosx is not provided by port libxslt. |
---|
1406 | DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 |
---|
1407 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml |
---|
1408 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1409 | DEBUG: docbook-xml 5.0_0 exists in the ports tree |
---|
1410 | DEBUG: docbook-xml 5.0_0 is the latest installed |
---|
1411 | DEBUG: docbook-xml 5.0_0 is active |
---|
1412 | DEBUG: Merging existing variants into variants |
---|
1413 | DEBUG: new fully merged portvariants: |
---|
1414 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml |
---|
1415 | DEBUG: OS Platform: darwin |
---|
1416 | DEBUG: OS Version: 10.2.0 |
---|
1417 | DEBUG: Mac OS X Version: 10.6 |
---|
1418 | DEBUG: System Arch: i386 |
---|
1419 | DEBUG: setting option os.universal_supported to yes |
---|
1420 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1421 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1422 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1423 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1424 | DEBUG: Requested variant darwin is not provided by port docbook-xml. |
---|
1425 | DEBUG: Requested variant i386 is not provided by port docbook-xml. |
---|
1426 | DEBUG: Requested variant macosx is not provided by port docbook-xml. |
---|
1427 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 |
---|
1428 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1429 | DEBUG: docbook-xml-4.1.2 4.1.2_1 exists in the ports tree |
---|
1430 | DEBUG: docbook-xml-4.1.2 4.1.2_1 is the latest installed |
---|
1431 | DEBUG: docbook-xml-4.1.2 4.1.2_1 is active |
---|
1432 | DEBUG: Merging existing variants into variants |
---|
1433 | DEBUG: new fully merged portvariants: |
---|
1434 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.1.2 |
---|
1435 | DEBUG: OS Platform: darwin |
---|
1436 | DEBUG: OS Version: 10.2.0 |
---|
1437 | DEBUG: Mac OS X Version: 10.6 |
---|
1438 | DEBUG: System Arch: i386 |
---|
1439 | DEBUG: setting option os.universal_supported to yes |
---|
1440 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1441 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1442 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1443 | DEBUG: not using configure, so not adding the default universal variant |
---|
1444 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.1.2. |
---|
1445 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.1.2. |
---|
1446 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.1.2. |
---|
1447 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip |
---|
1448 | DEBUG: unzip is *not* installed by MacPorts |
---|
1449 | DEBUG: Searching for dependency: unzip |
---|
1450 | DEBUG: Didn't find receipt, going to depspec regex for: unzip |
---|
1451 | DEBUG: Found Dependency: path: /usr/bin filename: unzip regex: ^unzip$ |
---|
1452 | DEBUG: unzip not installed, soft dependency satisfied |
---|
1453 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr |
---|
1454 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1455 | DEBUG: xmlcatmgr 2.2_1 exists in the ports tree |
---|
1456 | DEBUG: xmlcatmgr 2.2_1 is the latest installed |
---|
1457 | DEBUG: xmlcatmgr 2.2_1 is active |
---|
1458 | DEBUG: Merging existing variants into variants |
---|
1459 | DEBUG: new fully merged portvariants: |
---|
1460 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/xmlcatmgr |
---|
1461 | DEBUG: OS Platform: darwin |
---|
1462 | DEBUG: OS Version: 10.2.0 |
---|
1463 | DEBUG: Mac OS X Version: 10.6 |
---|
1464 | DEBUG: System Arch: i386 |
---|
1465 | DEBUG: setting option os.universal_supported to yes |
---|
1466 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1467 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1468 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1469 | DEBUG: adding the default universal variant |
---|
1470 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
1471 | DEBUG: Requested variant darwin is not provided by port xmlcatmgr. |
---|
1472 | DEBUG: Requested variant i386 is not provided by port xmlcatmgr. |
---|
1473 | DEBUG: Requested variant macosx is not provided by port xmlcatmgr. |
---|
1474 | DEBUG: No need to upgrade! xmlcatmgr 2.2_1 >= xmlcatmgr 2.2_1 |
---|
1475 | DEBUG: No need to upgrade! docbook-xml-4.1.2 4.1.2_1 >= docbook-xml-4.1.2 4.1.2_1 |
---|
1476 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 |
---|
1477 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1478 | DEBUG: docbook-xml-4.2 4.2_0 exists in the ports tree |
---|
1479 | DEBUG: docbook-xml-4.2 4.2_0 is the latest installed |
---|
1480 | DEBUG: docbook-xml-4.2 4.2_0 is active |
---|
1481 | DEBUG: Merging existing variants into variants |
---|
1482 | DEBUG: new fully merged portvariants: |
---|
1483 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.2 |
---|
1484 | DEBUG: OS Platform: darwin |
---|
1485 | DEBUG: OS Version: 10.2.0 |
---|
1486 | DEBUG: Mac OS X Version: 10.6 |
---|
1487 | DEBUG: System Arch: i386 |
---|
1488 | DEBUG: setting option os.universal_supported to yes |
---|
1489 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1490 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1491 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1492 | DEBUG: not using configure, so not adding the default universal variant |
---|
1493 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.2. |
---|
1494 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.2. |
---|
1495 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.2. |
---|
1496 | DEBUG: No need to upgrade! docbook-xml-4.2 4.2_0 >= docbook-xml-4.2 4.2_0 |
---|
1497 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 |
---|
1498 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1499 | DEBUG: docbook-xml-4.3 4.3_0 exists in the ports tree |
---|
1500 | DEBUG: docbook-xml-4.3 4.3_0 is the latest installed |
---|
1501 | DEBUG: docbook-xml-4.3 4.3_0 is active |
---|
1502 | DEBUG: Merging existing variants into variants |
---|
1503 | DEBUG: new fully merged portvariants: |
---|
1504 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.3 |
---|
1505 | DEBUG: OS Platform: darwin |
---|
1506 | DEBUG: OS Version: 10.2.0 |
---|
1507 | DEBUG: Mac OS X Version: 10.6 |
---|
1508 | DEBUG: System Arch: i386 |
---|
1509 | DEBUG: setting option os.universal_supported to yes |
---|
1510 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1511 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1512 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1513 | DEBUG: not using configure, so not adding the default universal variant |
---|
1514 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.3. |
---|
1515 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.3. |
---|
1516 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.3. |
---|
1517 | DEBUG: No need to upgrade! docbook-xml-4.3 4.3_0 >= docbook-xml-4.3 4.3_0 |
---|
1518 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 |
---|
1519 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1520 | DEBUG: docbook-xml-4.4 4.4_0 exists in the ports tree |
---|
1521 | DEBUG: docbook-xml-4.4 4.4_0 is the latest installed |
---|
1522 | DEBUG: docbook-xml-4.4 4.4_0 is active |
---|
1523 | DEBUG: Merging existing variants into variants |
---|
1524 | DEBUG: new fully merged portvariants: |
---|
1525 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.4 |
---|
1526 | DEBUG: OS Platform: darwin |
---|
1527 | DEBUG: OS Version: 10.2.0 |
---|
1528 | DEBUG: Mac OS X Version: 10.6 |
---|
1529 | DEBUG: System Arch: i386 |
---|
1530 | DEBUG: setting option os.universal_supported to yes |
---|
1531 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1532 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1533 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1534 | DEBUG: not using configure, so not adding the default universal variant |
---|
1535 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.4. |
---|
1536 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.4. |
---|
1537 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.4. |
---|
1538 | DEBUG: No need to upgrade! docbook-xml-4.4 4.4_0 >= docbook-xml-4.4 4.4_0 |
---|
1539 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 |
---|
1540 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1541 | DEBUG: docbook-xml-4.5 4.5_0 exists in the ports tree |
---|
1542 | DEBUG: docbook-xml-4.5 4.5_0 is the latest installed |
---|
1543 | DEBUG: docbook-xml-4.5 4.5_0 is active |
---|
1544 | DEBUG: Merging existing variants into variants |
---|
1545 | DEBUG: new fully merged portvariants: |
---|
1546 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-4.5 |
---|
1547 | DEBUG: OS Platform: darwin |
---|
1548 | DEBUG: OS Version: 10.2.0 |
---|
1549 | DEBUG: Mac OS X Version: 10.6 |
---|
1550 | DEBUG: System Arch: i386 |
---|
1551 | DEBUG: setting option os.universal_supported to yes |
---|
1552 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1553 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1554 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1555 | DEBUG: not using configure, so not adding the default universal variant |
---|
1556 | DEBUG: Requested variant darwin is not provided by port docbook-xml-4.5. |
---|
1557 | DEBUG: Requested variant i386 is not provided by port docbook-xml-4.5. |
---|
1558 | DEBUG: Requested variant macosx is not provided by port docbook-xml-4.5. |
---|
1559 | DEBUG: No need to upgrade! docbook-xml-4.5 4.5_0 >= docbook-xml-4.5 4.5_0 |
---|
1560 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 |
---|
1561 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1562 | DEBUG: docbook-xml-5.0 5.0_0 exists in the ports tree |
---|
1563 | DEBUG: docbook-xml-5.0 5.0_0 is the latest installed |
---|
1564 | DEBUG: docbook-xml-5.0 5.0_0 is active |
---|
1565 | DEBUG: Merging existing variants into variants |
---|
1566 | DEBUG: new fully merged portvariants: |
---|
1567 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xml-5.0 |
---|
1568 | DEBUG: OS Platform: darwin |
---|
1569 | DEBUG: OS Version: 10.2.0 |
---|
1570 | DEBUG: Mac OS X Version: 10.6 |
---|
1571 | DEBUG: System Arch: i386 |
---|
1572 | DEBUG: setting option os.universal_supported to yes |
---|
1573 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1574 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1575 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1576 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1577 | DEBUG: Requested variant darwin is not provided by port docbook-xml-5.0. |
---|
1578 | DEBUG: Requested variant i386 is not provided by port docbook-xml-5.0. |
---|
1579 | DEBUG: Requested variant macosx is not provided by port docbook-xml-5.0. |
---|
1580 | DEBUG: No need to upgrade! docbook-xml-5.0 5.0_0 >= docbook-xml-5.0 5.0_0 |
---|
1581 | DEBUG: No need to upgrade! docbook-xml 5.0_0 >= docbook-xml 5.0_0 |
---|
1582 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl |
---|
1583 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
1584 | DEBUG: docbook-xsl 1.75.2_0 exists in the ports tree |
---|
1585 | DEBUG: docbook-xsl 1.75.2_0 is the latest installed |
---|
1586 | DEBUG: docbook-xsl 1.75.2_0 is active |
---|
1587 | DEBUG: Merging existing variants into variants |
---|
1588 | DEBUG: new fully merged portvariants: |
---|
1589 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/docbook-xsl |
---|
1590 | DEBUG: OS Platform: darwin |
---|
1591 | DEBUG: OS Version: 10.2.0 |
---|
1592 | DEBUG: Mac OS X Version: 10.6 |
---|
1593 | DEBUG: System Arch: i386 |
---|
1594 | DEBUG: setting option os.universal_supported to yes |
---|
1595 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
1596 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
1597 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
1598 | DEBUG: 'universal_variant no' specified, so not adding the default universal variant |
---|
1599 | DEBUG: Requested variant darwin is not provided by port docbook-xsl. |
---|
1600 | DEBUG: Requested variant i386 is not provided by port docbook-xsl. |
---|
1601 | DEBUG: Requested variant macosx is not provided by port docbook-xsl. |
---|
1602 | DEBUG: No need to upgrade! docbook-xsl 1.75.2_0 >= docbook-xsl 1.75.2_0 |
---|
1603 | DEBUG: No need to upgrade! xmlto 0.0.23_0 >= xmlto 0.0.23_0 |
---|
1604 | ---> Computing dependencies for libzzip |
---|
1605 | DEBUG: Searching for dependency: zlib |
---|
1606 | DEBUG: Found Dependency: receipt exists for zlib |
---|
1607 | DEBUG: Searching for dependency: pkgconfig |
---|
1608 | DEBUG: Found Dependency: receipt exists for pkgconfig |
---|
1609 | DEBUG: Searching for dependency: xmlto |
---|
1610 | DEBUG: Found Dependency: receipt exists for xmlto |
---|
1611 | DEBUG: Executing org.macports.main (libzzip) |
---|
1612 | DEBUG: Skipping completed org.macports.fetch (libzzip) |
---|
1613 | DEBUG: Skipping completed org.macports.checksum (libzzip) |
---|
1614 | DEBUG: setting option extract.cmd to /usr/bin/bzip2 |
---|
1615 | DEBUG: Skipping completed org.macports.extract (libzzip) |
---|
1616 | DEBUG: Skipping completed org.macports.patch (libzzip) |
---|
1617 | ---> Configuring libzzip |
---|
1618 | DEBUG: Using compiler 'Mac OS X gcc 4.2' |
---|
1619 | DEBUG: Executing org.macports.configure (libzzip) |
---|
1620 | DEBUG: Environment: CFLAGS='-O2 -arch x86_64 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2 -arch x86_64 -arch i386' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-O2' INSTALL='/usr/bin/install -c' OBJCFLAGS='-O2 -arch x86_64 -arch i386' FFLAGS='-O2' CC='/usr/bin/gcc-4.2' |
---|
1621 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && ./configure --prefix=/opt/local --disable-dependency-tracking --enable-default-pkgconfigdir=/opt/local/lib/pkgconfig' |
---|
1622 | configure: WARNING: unrecognized options: --enable-default-pkgconfigdir |
---|
1623 | checking build system type... i686-apple-darwin10.2.0 |
---|
1624 | checking host system type... i686-apple-darwin10.2.0 |
---|
1625 | checking target system type... i686-apple-darwin10.2.0 |
---|
1626 | continue configure in default builddir "./Darwin_10.2.0_i386.d" |
---|
1627 | ....exec /bin/sh ".././configure" "--srcdir=.." "--enable-builddir=Darwin_10.2.0_i386.d" '--prefix=/opt/local' '--disable-dependency-tracking' '--enable-default-pkgconfigdir=/opt/local/lib/pkgconfig' 'CC=/usr/bin/gcc-4.2' 'CFLAGS=-O2 -arch x86_64 -arch i386' 'LDFLAGS=-L/opt/local/lib -arch x86_64 -arch i386' 'CPPFLAGS=-I/opt/local/include' 'CXX=/usr/bin/g++-4.2' 'CXXFLAGS=-O2 -arch x86_64 -arch i386' 'FFLAGS=-O2' |
---|
1628 | configure: WARNING: unrecognized options: --enable-default-pkgconfigdir |
---|
1629 | checking build system type... i686-apple-darwin10.2.0 |
---|
1630 | checking host system type... i686-apple-darwin10.2.0 |
---|
1631 | checking target system type... i686-apple-darwin10.2.0 |
---|
1632 | checking for gsed... sed |
---|
1633 | checking default prefix system... is /opt-package |
---|
1634 | ...using thread-safe linkage |
---|
1635 | checking zlib install prefix... none |
---|
1636 | checking rpm spec file... ../zziplib.spec |
---|
1637 | checking for spec package... zziplib |
---|
1638 | checking for spec version... 0.13.49 |
---|
1639 | checking for spec license type... GNU LGPL |
---|
1640 | checking for spec summary... ZZipLib - libZ-based ZIP-access Library |
---|
1641 | checking for spec category... Development/Libraries |
---|
1642 | checking for spec icon... zziplib-icon.png (fallback) |
---|
1643 | checking for a BSD-compatible install... /usr/bin/install -c |
---|
1644 | checking whether build environment is sane... yes |
---|
1645 | checking for gawk... no |
---|
1646 | checking for mawk... no |
---|
1647 | checking for nawk... no |
---|
1648 | checking for awk... awk |
---|
1649 | checking whether make sets $(MAKE)... yes |
---|
1650 | checking for gcc... /usr/bin/gcc-4.2 |
---|
1651 | checking whether the C compiler works... yes |
---|
1652 | checking for C compiler default output file name... a.out |
---|
1653 | checking for suffix of executables... |
---|
1654 | checking whether we are cross compiling... no |
---|
1655 | checking for suffix of object files... o |
---|
1656 | checking whether we are using the GNU C compiler... yes |
---|
1657 | checking whether /usr/bin/gcc-4.2 accepts -g... yes |
---|
1658 | checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed |
---|
1659 | checking for style of include used by make... GNU |
---|
1660 | checking dependency style of /usr/bin/gcc-4.2... none |
---|
1661 | checking for a sed that does not truncate output... /usr/bin/sed |
---|
1662 | checking for grep that handles long lines and -e... /usr/bin/grep |
---|
1663 | checking for egrep... /usr/bin/grep -E |
---|
1664 | checking for ld used by /usr/bin/gcc-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
---|
1665 | checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
---|
1666 | checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r |
---|
1667 | checking for BSD-compatible nm... /usr/bin/nm |
---|
1668 | checking whether ln -s works... yes |
---|
1669 | checking how to recognise dependent libraries... pass_all |
---|
1670 | checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E |
---|
1671 | checking for ANSI C header files... yes |
---|
1672 | checking for sys/types.h... yes |
---|
1673 | checking for sys/stat.h... yes |
---|
1674 | checking for stdlib.h... yes |
---|
1675 | checking for string.h... yes |
---|
1676 | checking for memory.h... yes |
---|
1677 | checking for strings.h... yes |
---|
1678 | checking for inttypes.h... yes |
---|
1679 | checking for stdint.h... yes |
---|
1680 | checking for unistd.h... yes |
---|
1681 | checking dlfcn.h usability... yes |
---|
1682 | checking dlfcn.h presence... yes |
---|
1683 | checking for dlfcn.h... yes |
---|
1684 | checking whether we are using the GNU C++ compiler... yes |
---|
1685 | checking whether /usr/bin/g++-4.2 accepts -g... yes |
---|
1686 | checking dependency style of /usr/bin/g++-4.2... none |
---|
1687 | checking how to run the C++ preprocessor... /usr/bin/g++-4.2 -E |
---|
1688 | checking for g77... no |
---|
1689 | checking for xlf... no |
---|
1690 | checking for f77... no |
---|
1691 | checking for frt... no |
---|
1692 | checking for pgf77... no |
---|
1693 | checking for cf77... no |
---|
1694 | checking for fort77... no |
---|
1695 | checking for fl32... no |
---|
1696 | checking for af77... no |
---|
1697 | checking for xlf90... no |
---|
1698 | checking for f90... no |
---|
1699 | checking for pgf90... no |
---|
1700 | checking for pghpf... no |
---|
1701 | checking for epcf90... no |
---|
1702 | checking for gfortran... no |
---|
1703 | checking for g95... no |
---|
1704 | checking for xlf95... no |
---|
1705 | checking for f95... no |
---|
1706 | checking for fort... no |
---|
1707 | checking for ifort... no |
---|
1708 | checking for ifc... no |
---|
1709 | checking for efc... no |
---|
1710 | checking for pgf95... no |
---|
1711 | checking for lf95... no |
---|
1712 | checking for ftn... no |
---|
1713 | checking whether we are using the GNU Fortran 77 compiler... no |
---|
1714 | checking whether accepts -g... no |
---|
1715 | checking the maximum length of command line arguments... 196608 |
---|
1716 | checking command to parse /usr/bin/nm output from /usr/bin/gcc-4.2 object... ok |
---|
1717 | checking for objdir... .libs |
---|
1718 | checking for ar... ar |
---|
1719 | checking for ranlib... ranlib |
---|
1720 | checking for strip... strip |
---|
1721 | checking if /usr/bin/gcc-4.2 supports -fno-rtti -fno-exceptions... no |
---|
1722 | checking for /usr/bin/gcc-4.2 option to produce PIC... -fno-common |
---|
1723 | checking if /usr/bin/gcc-4.2 PIC flag -fno-common works... yes |
---|
1724 | checking if /usr/bin/gcc-4.2 static flag -static works... no |
---|
1725 | checking if /usr/bin/gcc-4.2 supports -c -o file.o... yes |
---|
1726 | checking whether the /usr/bin/gcc-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
---|
1727 | checking dynamic linker characteristics... darwin10.2.0 dyld |
---|
1728 | checking how to hardcode library paths into programs... immediate |
---|
1729 | checking whether stripping libraries is possible... yes |
---|
1730 | checking if libtool supports shared libraries... yes |
---|
1731 | checking whether to build shared libraries... yes |
---|
1732 | checking whether to build static libraries... yes |
---|
1733 | configure: creating libtool |
---|
1734 | appending configuration tag "CXX" to libtool |
---|
1735 | checking for ld used by /usr/bin/g++-4.2... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld |
---|
1736 | checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no |
---|
1737 | checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
---|
1738 | checking for /usr/bin/g++-4.2 option to produce PIC... -fno-common |
---|
1739 | checking if /usr/bin/g++-4.2 PIC flag -fno-common works... yes |
---|
1740 | checking if /usr/bin/g++-4.2 static flag -static works... no |
---|
1741 | checking if /usr/bin/g++-4.2 supports -c -o file.o... yes |
---|
1742 | checking whether the /usr/bin/g++-4.2 linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes |
---|
1743 | checking dynamic linker characteristics... darwin10.2.0 dyld |
---|
1744 | checking how to hardcode library paths into programs... immediate |
---|
1745 | appending configuration tag "F77" to libtool |
---|
1746 | checking out linker version info 0.13.49 ... /0/13:49 (-0.so.13.0.49) |
---|
1747 | creating zzip/_msvc.in via zzip/_msvc.sed of config.h.in |
---|
1748 | checking whether to enable maintainer-specific portions of Makefiles... no |
---|
1749 | checking our pkgconfig libname... zziplib |
---|
1750 | checking our pkgconfig version... 0.13.49 |
---|
1751 | checking our pkgconfig_libdir... ${libdir}/pkgconfig |
---|
1752 | expanded our pkgconfig_libdir... /opt/local/lib/pkgconfig |
---|
1753 | checking our pkgconfig_libfile... zziplib.pc |
---|
1754 | checking our package / suffix... zziplib / |
---|
1755 | checking our pkgconfig description... ZZipLib - libZ-based ZIP-access Library |
---|
1756 | checking our pkgconfig requires... zzip-zlib-config |
---|
1757 | checking our pkgconfig ext libs... -lzzip |
---|
1758 | checking our pkgconfig cppflags... -I/opt/local/include |
---|
1759 | checking our pkgconfig ldflags... -L/opt/local/lib -arch x86_64 -arch i386 |
---|
1760 | generate the pkgconfig later... zzip/zziplib.pc |
---|
1761 | noninstalled pkgconfig -L /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/Darwin_10.2.0_i386.d/zzip/.libs |
---|
1762 | noninstalled pkgconfig -I /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/Darwin_10.2.0_i386.d/.. |
---|
1763 | checking for perl5... /opt/local/bin/perl5 |
---|
1764 | checking for python2.2... no |
---|
1765 | checking for python2.3... no |
---|
1766 | checking for python... /usr/bin/python |
---|
1767 | checking for zip... /usr/bin/zip |
---|
1768 | checking for xmlto... /opt/local/bin/xmlto |
---|
1769 | checking for inline... inline |
---|
1770 | checking for an ANSI C-conforming const... yes |
---|
1771 | checking for C restrict keyword... __restrict__ |
---|
1772 | checking for ANSI C header files... (cached) yes |
---|
1773 | checking for dirent.h that defines DIR... yes |
---|
1774 | checking for library containing opendir... none required |
---|
1775 | checking for stdint.h... (cached) yes |
---|
1776 | checking for unistd.h... (cached) yes |
---|
1777 | checking windows.h usability... no |
---|
1778 | checking windows.h presence... no |
---|
1779 | checking for windows.h... no |
---|
1780 | checking winnt.h usability... no |
---|
1781 | checking winnt.h presence... no |
---|
1782 | checking for winnt.h... no |
---|
1783 | checking winbase.h usability... no |
---|
1784 | checking winbase.h presence... no |
---|
1785 | checking for winbase.h... no |
---|
1786 | checking sys/int_types.h usability... no |
---|
1787 | checking sys/int_types.h presence... no |
---|
1788 | checking for sys/int_types.h... no |
---|
1789 | checking for sys/types.h... (cached) yes |
---|
1790 | checking sys/mman.h usability... yes |
---|
1791 | checking sys/mman.h presence... yes |
---|
1792 | checking for sys/mman.h... yes |
---|
1793 | checking for sys/stat.h... (cached) yes |
---|
1794 | checking sys/param.h usability... yes |
---|
1795 | checking sys/param.h presence... yes |
---|
1796 | checking for sys/param.h... yes |
---|
1797 | checking io.h usability... no |
---|
1798 | checking io.h presence... no |
---|
1799 | checking for io.h... no |
---|
1800 | checking direct.h usability... no |
---|
1801 | checking direct.h presence... no |
---|
1802 | checking for direct.h... no |
---|
1803 | checking zlib.h usability... yes |
---|
1804 | checking zlib.h presence... yes |
---|
1805 | checking for zlib.h... yes |
---|
1806 | checking byteswap.h usability... no |
---|
1807 | checking byteswap.h presence... no |
---|
1808 | checking for byteswap.h... no |
---|
1809 | checking fnmatch.h usability... yes |
---|
1810 | checking fnmatch.h presence... yes |
---|
1811 | checking for fnmatch.h... yes |
---|
1812 | checking for strcasecmp... yes |
---|
1813 | checking for strndup... no |
---|
1814 | checking for off_t... yes |
---|
1815 | checking for size_t... yes |
---|
1816 | checking for ssize_t... yes |
---|
1817 | checking for off64_t... no |
---|
1818 | checking for __int64... no |
---|
1819 | checking size of short... 2 |
---|
1820 | checking size of int... 4 |
---|
1821 | checking whether byte ordering is bigendian... universal |
---|
1822 | checking if pointers to integers require aligned access... no |
---|
1823 | checking for special C compiler options needed for large files... no |
---|
1824 | checking for _FILE_OFFSET_BITS value needed for large files... no |
---|
1825 | checking whether system differentiates 64bit off_t by defines... yes |
---|
1826 | compiles library as 32bit off_t variant - largefile is not the default here |
---|
1827 | checking for zlib being found... yes - 1.2.3 |
---|
1828 | checking docdir default... ${datadir}/doc |
---|
1829 | checking whether using debugging messages in libraries... no |
---|
1830 | checking whether thread stack is too small for bufsiz buffers... no |
---|
1831 | checking whether can use mmap for file scanning... yes, sys/mman.h |
---|
1832 | checking whether making SDL parts... no, disabled |
---|
1833 | checking running extra tests on make check... yes |
---|
1834 | checking link options... --export-dynamic # |
---|
1835 | checking auto silent in maintainer mode... libtool-silent, auto-sleep-9 |
---|
1836 | checking CFLAGS frame-pointer... no, -fomit-frame-pointer added |
---|
1837 | checking CFLAGS for maximum warnings... -Wall |
---|
1838 | checking CFLAGS making strings readonly... .././configure: line 21357: -e: command not found |
---|
1839 | |
---|
1840 | checking CFLAGS for strict prototypes... no, suppressed, signal.h, |
---|
1841 | checking CFLAGS for gcc -Wpointer-arith... -Wpointer-arith |
---|
1842 | checking CFLAGS for gcc -Wsign-compare... -Wsign-compare |
---|
1843 | checking CFLAGS for gcc -Wmissing-declarations... -Wmissing-declarations |
---|
1844 | checking CFLAGS for gcc -Wdeclaration-after-statement... -Wdeclaration-after-statement |
---|
1845 | checking CFLAGS for gcc -Werror-implicit-function-declaration... -Werror-implicit-function-declaration |
---|
1846 | checking for pkg-config... /opt/local/bin/pkg-config |
---|
1847 | configure: warning: pkgconfigdir=/opt/local/lib/pkgconfig (see config.log) |
---|
1848 | configure: perhaps: make install pkgconfigdir=/usr/lib/pkgconfig |
---|
1849 | /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/uses/missing: line 33: aclocal-1.9: command not found |
---|
1850 | WARNING: `aclocal-1.9' is needed, and you do not seem to have it handy on your |
---|
1851 | system. You might have modified some files without having the |
---|
1852 | proper tools for further handling them. Check the `README' file, |
---|
1853 | it often tells you about the needed prerequirements for installing |
---|
1854 | this package. You may also peek at any GNU archive site, in case |
---|
1855 | some other package would contain this missing `aclocal-1.9' program. |
---|
1856 | configure: warning: aclocaldir=/opt/local/share/aclocal (see config.log) |
---|
1857 | configure: perhaps: make install aclocaldir=/usr/share/aclocal |
---|
1858 | configure: creating ./config.status |
---|
1859 | config.status: creating Makefile |
---|
1860 | config.status: creating zzip/Makefile |
---|
1861 | config.status: creating zzipwrap/Makefile |
---|
1862 | config.status: creating SDL/Makefile |
---|
1863 | config.status: creating docs/Makefile |
---|
1864 | config.status: creating test/Makefile |
---|
1865 | config.status: creating bins/Makefile |
---|
1866 | config.status: creating config.h |
---|
1867 | config.status: executing buildir commands |
---|
1868 | config.status: create top_srcdir/Makefile guessed from local Makefile |
---|
1869 | config.status: extend top_srcdir/Makefile with top_srcdir/Makefile.mk |
---|
1870 | config.status: make uses BUILD=Darwin_10.2.0_i386.d (on :) |
---|
1871 | config.status: executing depfiles commands |
---|
1872 | config.status: executing zzip/_config.h commands |
---|
1873 | config.status: creating zzip/_config.h - prefix ZZIP for config.h defines |
---|
1874 | config.status: executing zzip/_msvc.h commands |
---|
1875 | config.status: creating zzip/_msvc.h - prefix ZZIP for zzip/_msvc.in defines |
---|
1876 | config.status: executing zzip/zziplib.pc commands |
---|
1877 | config.status: creating zzip/zziplib.pc.in |
---|
1878 | config.status: creating zzip/zziplib.pc |
---|
1879 | config.status: creating zzip/zziplib-uninstalled.pc |
---|
1880 | config.status: creating zzip/zziplib-uninstalled.sh |
---|
1881 | configure: WARNING: unrecognized options: --enable-default-pkgconfigdir |
---|
1882 | ----- zziplib 0.13.49 /opt/local |
---|
1883 | host: i686-apple-darwin10.2.0 |
---|
1884 | enable shared libraries |
---|
1885 | enable static libraries |
---|
1886 | CFLAGS= -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration |
---|
1887 | enable mmap (yes, sys/mman.h) |
---|
1888 | without lowstk (no) |
---|
1889 | without debug (no) |
---|
1890 | # make && make check && make install |
---|
1891 | ---> Building libzzip |
---|
1892 | DEBUG: Executing org.macports.build (libzzip) |
---|
1893 | DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' |
---|
1894 | DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && /usr/bin/make -j2 all' |
---|
1895 | (cd `uname -msr | tr " /" "__"`.d && test ! -f configure && /usr/bin/make "all") || exit ; /usr/bin/make done "RULE=all" |
---|
1896 | /usr/bin/make all-recursive |
---|
1897 | Making all in zzip |
---|
1898 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o zip.lo ../../zzip/zip.c |
---|
1899 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o file.lo ../../zzip/file.c |
---|
1900 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o dir.lo ../../zzip/dir.c |
---|
1901 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o stat.lo ../../zzip/stat.c |
---|
1902 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o info.lo ../../zzip/info.c |
---|
1903 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o err.lo ../../zzip/err.c |
---|
1904 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o plugin.lo ../../zzip/plugin.c |
---|
1905 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o write.lo ../../zzip/write.c |
---|
1906 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o fetch.lo ../../zzip/fetch.c |
---|
1907 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o mmapped.lo ../../zzip/mmapped.c |
---|
1908 | ../../zzip/mmapped.c: In function '_zzip_strndup': |
---|
1909 | ../../zzip/mmapped.c:183: warning: pointer targets in return differ in signedness |
---|
1910 | ../../zzip/mmapped.c:184: warning: pointer targets in passing argument 1 of '__builtin___strncpy_chk' differ in signedness |
---|
1911 | ../../zzip/mmapped.c:184: warning: pointer targets in passing argument 1 of '__inline_strncpy_chk' differ in signedness |
---|
1912 | ../../zzip/mmapped.c:186: warning: pointer targets in return differ in signedness |
---|
1913 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o memdisk.lo ../../zzip/memdisk.c |
---|
1914 | ../../zzip/mmapped.c: In function '_zzip_strndup': |
---|
1915 | ../../zzip/mmapped.c:183: warning: pointer targets in return differ in signedness |
---|
1916 | ../../zzip/mmapped.c:184: warning: pointer targets in passing argument 1 of '__builtin___strncpy_chk' differ in signedness |
---|
1917 | ../../zzip/mmapped.c:184: warning: pointer targets in passing argument 1 of '__inline_strncpy_chk' differ in signedness |
---|
1918 | ../../zzip/mmapped.c:186: warning: pointer targets in return differ in signedness |
---|
1919 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o fseeko.lo ../../zzip/fseeko.c |
---|
1920 | echo 'Libs: ${zlib_libs}' >>zzip-zlib-config.pc |
---|
1921 | echo 'Cflags: ${zlib_cflags}' >>zzip-zlib-config.pc |
---|
1922 | sed -e 's/-lzzip/-lzzipmmapped/' -e 's/zziplib/zzipmmapped/' \ |
---|
1923 | zziplib.pc >zzipmmapped.pc |
---|
1924 | sed -e 's/-lzzip/-lzzipfseeko/' -e 's/zziplib/zzipfseeko/' \ |
---|
1925 | zziplib.pc >zzipfseeko.pc |
---|
1926 | /bin/sh ../libtool --silent --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -L/opt/local/lib -arch x86_64 -arch i386 -o libzzip.la -rpath /opt/local/lib --export-dynamic -release 0 -version-info 13:49 -thread-safe zip.lo file.lo dir.lo stat.lo info.lo err.lo plugin.lo write.lo fetch.lo -lz |
---|
1927 | /bin/sh ../libtool --silent --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -L/opt/local/lib -arch x86_64 -arch i386 -o libzzipmmapped.la -rpath /opt/local/lib --export-dynamic -release 0 -version-info 13:49 -thread-safe mmapped.lo memdisk.lo fetch.lo -lz |
---|
1928 | /bin/sh ../libtool --silent --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -L/opt/local/lib -arch x86_64 -arch i386 -o libzzipfseeko.la -rpath /opt/local/lib --export-dynamic -release 0 -version-info 13:49 -thread-safe fseeko.lo fetch.lo -lz |
---|
1929 | Making all in zzipwrap |
---|
1930 | /bin/sh ../libtool --silent --tag=CC --mode=compile /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c -o wrap.lo ../../zzipwrap/wrap.c |
---|
1931 | /usr/bin/gcc-4.2 -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -c ../../zzipwrap/zzipwrap.c |
---|
1932 | echo 'Requires: zziplib' >>zzipwrap.pc |
---|
1933 | echo 'Libs: -L${libdir} -lzzipwrap' >>zzipwrap.pc |
---|
1934 | echo 'Cflags: -I${includedir}' >>zzipwrap.pc |
---|
1935 | /bin/sh ../libtool --silent --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -L/opt/local/lib -arch x86_64 -arch i386 -o libzzipwrap.la -rpath /opt/local/lib --export-dynamic -release 0 -version-info 13:49 -thread-safe wrap.lo ../zzip/libzzip.la |
---|
1936 | /bin/sh ../libtool --silent --tag=CC --mode=link /usr/bin/gcc-4.2 -O2 -arch x86_64 -arch i386 -D_USE_MMAP -fomit-frame-pointer -Wall -Wpointer-arith -Wsign-compare -Wmissing-declarations -Wdeclaration-after-statement -Werror-implicit-function-declaration -L/opt/local/lib -arch x86_64 -arch i386 -o zzipwrap --export-dynamic zzipwrap.o libzzipwrap.la |
---|
1937 | ld: warning: in ./.libs/libzzipwrap.dylib, file is not of required architecture |
---|
1938 | ld: warning: in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49/Darwin_10.2.0_i386.d/zzip/.libs/libzzip.dylib, file is not of required architecture |
---|
1939 | Undefined symbols for architecture i386: |
---|
1940 | "_zzip_compr_str", referenced from: |
---|
1941 | _main in zzipwrap.o |
---|
1942 | _main in zzipwrap.o |
---|
1943 | "_zzip_closedir", referenced from: |
---|
1944 | _main in zzipwrap.o |
---|
1945 | "_zzipwrap_use_memory_io", referenced from: |
---|
1946 | _main in zzipwrap.o |
---|
1947 | "_zzip_opendir_ext_io", referenced from: |
---|
1948 | _main in zzipwrap.o |
---|
1949 | "_zzip_readdir", referenced from: |
---|
1950 | _main in zzipwrap.o |
---|
1951 | ld: symbol(s) not found for architecture i386 |
---|
1952 | collect2: ld returned 1 exit status |
---|
1953 | lipo: can't open input file: /var/tmp//ccFv9PqI.out (No such file or directory) |
---|
1954 | make[3]: *** [zzipwrap] Error 1 |
---|
1955 | make[2]: *** [all-recursive] Error 1 |
---|
1956 | make[1]: *** [all] Error 2 |
---|
1957 | make: *** [all] Error 2 |
---|
1958 | Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && /usr/bin/make -j2 all " returned error 2 |
---|
1959 | DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_archivers_libzzip/work/zziplib-0.13.49" && /usr/bin/make -j2 all " returned error 2 |
---|
1960 | while executing |
---|
1961 | "command_exec build" |
---|
1962 | (procedure "portbuild::build_main" line 9) |
---|
1963 | invoked from within |
---|
1964 | "$procedure $targetname" |
---|
1965 | Warning: the following items did not execute (for libzzip): org.macports.activate org.macports.build org.macports.destroot org.macports.install |
---|
1966 | Error: Status 1 encountered during processing. |
---|
1967 | To report a bug, see <http://guide.macports.org/#project.tickets> |
---|