1 | MacBookBlack:~ adam$ sudo port -d install apt |
---|
2 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/apt |
---|
3 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/apt |
---|
4 | DEBUG: OS Platform: darwin |
---|
5 | DEBUG: OS Version: 10.3.0 |
---|
6 | DEBUG: Mac OS X Version: 10.6 |
---|
7 | DEBUG: System Arch: i386 |
---|
8 | DEBUG: setting option os.universal_supported to yes |
---|
9 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
10 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
11 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
12 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
13 | DEBUG: adding the default universal variant |
---|
14 | DEBUG: Requested variant i386 is not provided by port apt. |
---|
15 | DEBUG: Requested variant macosx is not provided by port apt. |
---|
16 | DEBUG: Executing variant darwin provides darwin |
---|
17 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/dpkg |
---|
18 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
19 | DEBUG: dpkg 1.10.28_1 exists in the ports tree |
---|
20 | DEBUG: dpkg 1.10.28_1 +darwin is the latest installed |
---|
21 | DEBUG: dpkg 1.10.28_1 +darwin is active |
---|
22 | DEBUG: Merging existing variants darwin into variants |
---|
23 | DEBUG: new fully merged portvariants: |
---|
24 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/dpkg |
---|
25 | DEBUG: OS Platform: darwin |
---|
26 | DEBUG: OS Version: 10.3.0 |
---|
27 | DEBUG: Mac OS X Version: 10.6 |
---|
28 | DEBUG: System Arch: i386 |
---|
29 | DEBUG: setting option os.universal_supported to yes |
---|
30 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
31 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
32 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
33 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
34 | DEBUG: adding the default universal variant |
---|
35 | DEBUG: Requested variant i386 is not provided by port dpkg. |
---|
36 | DEBUG: Requested variant macosx is not provided by port dpkg. |
---|
37 | DEBUG: Executing variant darwin provides darwin |
---|
38 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake |
---|
39 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
40 | DEBUG: gmake 3.81_0 exists in the ports tree |
---|
41 | DEBUG: gmake 3.81_0 is the latest installed |
---|
42 | DEBUG: gmake 3.81_0 is active |
---|
43 | DEBUG: Merging existing variants into variants |
---|
44 | DEBUG: new fully merged portvariants: |
---|
45 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake |
---|
46 | DEBUG: OS Platform: darwin |
---|
47 | DEBUG: OS Version: 10.3.0 |
---|
48 | DEBUG: Mac OS X Version: 10.6 |
---|
49 | DEBUG: System Arch: i386 |
---|
50 | DEBUG: setting option os.universal_supported to yes |
---|
51 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
52 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
53 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
54 | DEBUG: adding the default universal variant |
---|
55 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
56 | DEBUG: Requested variant darwin is not provided by port gmake. |
---|
57 | DEBUG: Requested variant i386 is not provided by port gmake. |
---|
58 | DEBUG: Requested variant macosx is not provided by port gmake. |
---|
59 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
60 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
61 | DEBUG: gettext 0.17_4 exists in the ports tree |
---|
62 | DEBUG: gettext 0.17_4 is the latest installed |
---|
63 | DEBUG: gettext 0.17_4 is active |
---|
64 | DEBUG: Merging existing variants into variants |
---|
65 | DEBUG: new fully merged portvariants: |
---|
66 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext |
---|
67 | DEBUG: OS Platform: darwin |
---|
68 | DEBUG: OS Version: 10.3.0 |
---|
69 | DEBUG: Mac OS X Version: 10.6 |
---|
70 | DEBUG: System Arch: i386 |
---|
71 | DEBUG: setting option os.universal_supported to yes |
---|
72 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
73 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
74 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
75 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
76 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
77 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl |
---|
78 | DEBUG: universal variant already exists, so not adding the default one |
---|
79 | DEBUG: Requested variant darwin is not provided by port gettext. |
---|
80 | DEBUG: Requested variant i386 is not provided by port gettext. |
---|
81 | DEBUG: Requested variant macosx is not provided by port gettext. |
---|
82 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
83 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
84 | DEBUG: libiconv 1.13.1_0 exists in the ports tree |
---|
85 | DEBUG: libiconv 1.13.1_0 is the latest installed |
---|
86 | DEBUG: libiconv 1.13.1_0 is active |
---|
87 | DEBUG: Merging existing variants into variants |
---|
88 | DEBUG: new fully merged portvariants: |
---|
89 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv |
---|
90 | DEBUG: OS Platform: darwin |
---|
91 | DEBUG: OS Version: 10.3.0 |
---|
92 | DEBUG: Mac OS X Version: 10.6 |
---|
93 | DEBUG: System Arch: i386 |
---|
94 | DEBUG: setting option os.universal_supported to yes |
---|
95 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
96 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
97 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
98 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
99 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
100 | DEBUG: universal variant already exists, so not adding the default one |
---|
101 | DEBUG: Requested variant darwin is not provided by port libiconv. |
---|
102 | DEBUG: Requested variant i386 is not provided by port libiconv. |
---|
103 | DEBUG: Requested variant macosx is not provided by port libiconv. |
---|
104 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
105 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
106 | DEBUG: gperf 3.0.4_0 exists in the ports tree |
---|
107 | DEBUG: gperf 3.0.4_0 is the latest installed |
---|
108 | DEBUG: gperf 3.0.4_0 is active |
---|
109 | DEBUG: Merging existing variants into variants |
---|
110 | DEBUG: new fully merged portvariants: |
---|
111 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf |
---|
112 | DEBUG: OS Platform: darwin |
---|
113 | DEBUG: OS Version: 10.3.0 |
---|
114 | DEBUG: Mac OS X Version: 10.6 |
---|
115 | DEBUG: System Arch: i386 |
---|
116 | DEBUG: setting option os.universal_supported to yes |
---|
117 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
118 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
119 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
120 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
121 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
122 | DEBUG: universal variant already exists, so not adding the default one |
---|
123 | DEBUG: Requested variant darwin is not provided by port gperf. |
---|
124 | DEBUG: Requested variant i386 is not provided by port gperf. |
---|
125 | DEBUG: Requested variant macosx is not provided by port gperf. |
---|
126 | DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 |
---|
127 | DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 |
---|
128 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
129 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
130 | DEBUG: ncurses 5.7_0 exists in the ports tree |
---|
131 | DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed |
---|
132 | DEBUG: ncurses 5.7_0 +darwin_10 is active |
---|
133 | DEBUG: Merging existing variants darwin_10 into variants |
---|
134 | DEBUG: new fully merged portvariants: |
---|
135 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses |
---|
136 | DEBUG: OS Platform: darwin |
---|
137 | DEBUG: OS Version: 10.3.0 |
---|
138 | DEBUG: Mac OS X Version: 10.6 |
---|
139 | DEBUG: System Arch: i386 |
---|
140 | DEBUG: setting option os.universal_supported to yes |
---|
141 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
142 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
143 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
144 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
145 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
146 | DEBUG: universal variant already exists, so not adding the default one |
---|
147 | DEBUG: Requested variant darwin is not provided by port ncurses. |
---|
148 | DEBUG: Requested variant i386 is not provided by port ncurses. |
---|
149 | DEBUG: Requested variant macosx is not provided by port ncurses. |
---|
150 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
151 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
152 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
153 | DEBUG: ncursesw 5.7_0 exists in the ports tree |
---|
154 | DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed |
---|
155 | DEBUG: ncursesw 5.7_0 +darwin_10 is active |
---|
156 | DEBUG: Merging existing variants darwin_10 into variants |
---|
157 | DEBUG: new fully merged portvariants: |
---|
158 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw |
---|
159 | DEBUG: OS Platform: darwin |
---|
160 | DEBUG: OS Version: 10.3.0 |
---|
161 | DEBUG: Mac OS X Version: 10.6 |
---|
162 | DEBUG: System Arch: i386 |
---|
163 | DEBUG: setting option os.universal_supported to yes |
---|
164 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
165 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
166 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
167 | DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl |
---|
168 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
169 | DEBUG: universal variant already exists, so not adding the default one |
---|
170 | DEBUG: Requested variant darwin is not provided by port ncursesw. |
---|
171 | DEBUG: Requested variant i386 is not provided by port ncursesw. |
---|
172 | DEBUG: Requested variant macosx is not provided by port ncursesw. |
---|
173 | DEBUG: Executing variant darwin_10 provides darwin_10 |
---|
174 | DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 |
---|
175 | DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 |
---|
176 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
177 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
178 | DEBUG: expat 2.0.1_0 exists in the ports tree |
---|
179 | DEBUG: expat 2.0.1_0 is the latest installed |
---|
180 | DEBUG: expat 2.0.1_0 is active |
---|
181 | DEBUG: Merging existing variants into variants |
---|
182 | DEBUG: new fully merged portvariants: |
---|
183 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat |
---|
184 | DEBUG: OS Platform: darwin |
---|
185 | DEBUG: OS Version: 10.3.0 |
---|
186 | DEBUG: Mac OS X Version: 10.6 |
---|
187 | DEBUG: System Arch: i386 |
---|
188 | DEBUG: setting option os.universal_supported to yes |
---|
189 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
190 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
191 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
192 | DEBUG: adding the default universal variant |
---|
193 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
194 | DEBUG: Requested variant darwin is not provided by port expat. |
---|
195 | DEBUG: Requested variant i386 is not provided by port expat. |
---|
196 | DEBUG: Requested variant macosx is not provided by port expat. |
---|
197 | DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 |
---|
198 | DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 |
---|
199 | DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0 |
---|
200 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
201 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
202 | DEBUG: perl5 5.8.9_0 exists in the ports tree |
---|
203 | DEBUG: perl5 5.8.9_0 is the latest installed |
---|
204 | DEBUG: perl5 5.8.9_0 is active |
---|
205 | DEBUG: Merging existing variants into variants |
---|
206 | DEBUG: new fully merged portvariants: |
---|
207 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 |
---|
208 | DEBUG: OS Platform: darwin |
---|
209 | DEBUG: OS Version: 10.3.0 |
---|
210 | DEBUG: Mac OS X Version: 10.6 |
---|
211 | DEBUG: System Arch: i386 |
---|
212 | DEBUG: setting option os.universal_supported to yes |
---|
213 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
214 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
215 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
216 | DEBUG: not using configure, so not adding the default universal variant |
---|
217 | DEBUG: Requested variant darwin is not provided by port perl5. |
---|
218 | DEBUG: Requested variant i386 is not provided by port perl5. |
---|
219 | DEBUG: Requested variant macosx is not provided by port perl5. |
---|
220 | DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
221 | DEBUG: epoch: in tree: 0 installed: 0 |
---|
222 | DEBUG: perl5.8 5.8.9_3 exists in the ports tree |
---|
223 | DEBUG: perl5.8 5.8.9_3 is the latest installed |
---|
224 | DEBUG: perl5.8 5.8.9_3 is active |
---|
225 | DEBUG: Merging existing variants into variants |
---|
226 | DEBUG: new fully merged portvariants: |
---|
227 | DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 |
---|
228 | DEBUG: OS Platform: darwin |
---|
229 | DEBUG: OS Version: 10.3.0 |
---|
230 | DEBUG: Mac OS X Version: 10.6 |
---|
231 | DEBUG: System Arch: i386 |
---|
232 | DEBUG: setting option os.universal_supported to yes |
---|
233 | DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided |
---|
234 | DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided |
---|
235 | DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided |
---|
236 | DEBUG: adding the default universal variant |
---|
237 | DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf |
---|
238 | DEBUG: Requested variant darwin is not provided by port perl5.8. |
---|
239 | DEBUG: Requested variant i386 is not provided by port perl5.8. |
---|
240 | DEBUG: Requested variant macosx is not provided by port perl5.8. |
---|
241 | DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 |
---|
242 | DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 |
---|
243 | DEBUG: No need to upgrade! dpkg 1.10.28_1 >= dpkg 1.10.28_1 |
---|
244 | ---> Computing dependencies for apt |
---|
245 | DEBUG: Searching for dependency: dpkg |
---|
246 | DEBUG: Found Dependency: receipt exists for dpkg |
---|
247 | DEBUG: Searching for dependency: bash |
---|
248 | DEBUG: Didn't find receipt, going to depspec regex for: bash |
---|
249 | DEBUG: Found Dependency: path: /bin filename: bash regex: ^bash$ |
---|
250 | DEBUG: Searching for dependency: gettext |
---|
251 | DEBUG: Found Dependency: receipt exists for gettext |
---|
252 | DEBUG: Searching for dependency: gmake |
---|
253 | DEBUG: Found Dependency: receipt exists for gmake |
---|
254 | DEBUG: Executing org.macports.main (apt) |
---|
255 | ---> Fetching apt |
---|
256 | DEBUG: Executing org.macports.fetch (apt) |
---|
257 | ---> apt_0.5.27.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/apt |
---|
258 | DEBUG: Pinging ftp.debian.org... |
---|
259 | DEBUG: Pinging distfiles.macports.org... |
---|
260 | DEBUG: Pinging aarnet.au.distfiles.macports.org... |
---|
261 | DEBUG: Pinging lil.fr.distfiles.macports.org... |
---|
262 | DEBUG: ftp.debian.org ping time is 42.036 |
---|
263 | DEBUG: distfiles.macports.org ping time is 195.659 |
---|
264 | DEBUG: aarnet.au.distfiles.macports.org ping time is 353.847 |
---|
265 | DEBUG: lil.fr.distfiles.macports.org ping time is 25.268 |
---|
266 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://lil.fr.distfiles.macports.org/apt |
---|
267 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
268 | Dload Upload Total Spent Left Speed |
---|
269 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
270 | DEBUG: Fetching failed:: HTTP response code said error |
---|
271 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://ftp.debian.org/debian/pool/main/a/apt/ |
---|
272 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
273 | Dload Upload Total Spent Left Speed |
---|
274 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
275 | DEBUG: Fetching failed:: HTTP response code said error |
---|
276 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://distfiles.macports.org/apt |
---|
277 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
278 | Dload Upload Total Spent Left Speed |
---|
279 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
280 | DEBUG: Fetching failed:: HTTP response code said error |
---|
281 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/apt |
---|
282 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
283 | Dload Upload Total Spent Left Speed |
---|
284 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
285 | DEBUG: Fetching failed:: HTTP response code said error |
---|
286 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://svn.macports.org/repository/macports/distfiles/apt |
---|
287 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
288 | Dload Upload Total Spent Left Speed |
---|
289 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
290 | DEBUG: Fetching failed:: HTTP response code said error |
---|
291 | ---> Attempting to fetch apt_0.5.27.tar.gz from http://svn.macports.org/repository/macports/distfiles/general/ |
---|
292 | % Total % Received % Xferd Average Speed Time Time Time Current |
---|
293 | Dload Upload Total Spent Left Speed |
---|
294 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
---|
295 | DEBUG: Fetching failed:: HTTP response code said error |
---|
296 | Error: Target org.macports.fetch returned: fetch failed |
---|
297 | DEBUG: Backtrace: fetch failed |
---|
298 | while executing |
---|
299 | "portfetch::fetchfiles" |
---|
300 | (procedure "portfetch::fetch_main" line 16) |
---|
301 | invoked from within |
---|
302 | "$procedure $targetname" |
---|
303 | Warning: the following items did not execute (for apt): org.macports.activate org.macports.fetch org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install |
---|
304 | Error: Status 1 encountered during processing. |
---|
305 | To report a bug, see <http://guide.macports.org/#project.tickets> |
---|