sudo port -d install nco Password: DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/nco DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/nco DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port nco. DEBUG: Requested variant i386 is not provided by port nco. DEBUG: Requested variant macosx is not provided by port nco. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: curl 7.20.0_0 exists in the ports tree DEBUG: curl 7.20.0_0 +ssl is the latest installed DEBUG: curl 7.20.0_0 +ssl is active DEBUG: Merging existing variants ssl into variants DEBUG: new fully merged portvariants: ssl + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant ssl provides ssl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 is the latest installed DEBUG: pkgconfig 0.23_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.4_1 exists in the ports tree DEBUG: zlib 1.2.4_1 is the latest installed DEBUG: zlib 1.2.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libidn 1.16_0 exists in the ports tree DEBUG: libidn 1.16_0 is the latest installed DEBUG: libidn 1.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libidn. DEBUG: Requested variant i386 is not provided by port libidn. DEBUG: Requested variant macosx is not provided by port libidn. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8n_0 exists in the ports tree DEBUG: openssl 0.9.8n_0 +darwin is the latest installed DEBUG: openssl 0.9.8n_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8n_0 >= openssl 0.9.8n_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle DEBUG: epoch: in tree: 0 installed: 0 DEBUG: curl-ca-bundle 7.20.0_3 exists in the ports tree DEBUG: curl-ca-bundle 7.20.0_3 is the latest installed DEBUG: curl-ca-bundle 7.20.0_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port curl-ca-bundle. DEBUG: Requested variant i386 is not provided by port curl-ca-bundle. DEBUG: Requested variant macosx is not provided by port curl-ca-bundle. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: No need to upgrade! curl-ca-bundle 7.20.0_3 >= curl-ca-bundle 7.20.0_3 DEBUG: No need to upgrade! curl 7.20.0_0 >= curl 7.20.0_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.7_0 exists in the ports tree DEBUG: libxml2 2.7.7_0 is the latest installed DEBUG: libxml2 2.7.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: No need to upgrade! libxml2 2.7.7_0 >= libxml2 2.7.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/netcdf-devel DEBUG: epoch: in tree: 1 installed: 1 DEBUG: netcdf-devel 4.1.1_0 exists in the ports tree DEBUG: netcdf-devel 4.1.1_0 is the latest installed DEBUG: netcdf-devel 4.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/netcdf-devel DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port netcdf-devel. DEBUG: Requested variant i386 is not provided by port netcdf-devel. DEBUG: Requested variant macosx is not provided by port netcdf-devel. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/szip DEBUG: epoch: in tree: 0 installed: 0 DEBUG: szip 2.1_1 exists in the ports tree DEBUG: szip 2.1_1 is the latest installed DEBUG: szip 2.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/szip DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port szip. DEBUG: Requested variant i386 is not provided by port szip. DEBUG: Requested variant macosx is not provided by port szip. DEBUG: No need to upgrade! szip 2.1_1 >= szip 2.1_1 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: hdf5-18 1.8.4-patch1_0 exists in the ports tree DEBUG: hdf5-18 1.8.4-patch1_0 is the latest installed DEBUG: hdf5-18 1.8.4-patch1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf5-18 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port hdf5-18. DEBUG: Requested variant i386 is not provided by port hdf5-18. DEBUG: Requested variant macosx is not provided by port hdf5-18. DEBUG: No need to upgrade! hdf5-18 1.8.4-patch1_0 >= hdf5-18 1.8.4-patch1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: hdf4 4.2r4_3 exists in the ports tree DEBUG: hdf4 4.2r4_3 is the latest installed DEBUG: hdf4 4.2r4_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/hdf4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port hdf4. DEBUG: Requested variant i386 is not provided by port hdf4. DEBUG: Requested variant macosx is not provided by port hdf4. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8a_0 exists in the ports tree DEBUG: jpeg 8a_0 is the latest installed DEBUG: jpeg 8a_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: No need to upgrade! jpeg 8a_0 >= jpeg 8a_0 DEBUG: No need to upgrade! hdf4 4.2r4_3 >= hdf4 4.2r4_3 DEBUG: No need to upgrade! netcdf-devel 4.1.1_0 >= netcdf-devel 4.1.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/science/udunits DEBUG: epoch: in tree: 0 installed: 0 DEBUG: udunits 1.12.9_0 exists in the ports tree DEBUG: udunits 1.12.9_0 is the latest installed DEBUG: udunits 1.12.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/science/udunits DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port udunits. DEBUG: Requested variant i386 is not provided by port udunits. DEBUG: Requested variant macosx is not provided by port udunits. DEBUG: No need to upgrade! udunits 1.12.9_0 >= udunits 1.12.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/antlr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: antlr 2.7.7_0 exists in the ports tree DEBUG: antlr 2.7.7_0 is the latest installed DEBUG: antlr 2.7.7_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/antlr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port antlr. DEBUG: Requested variant i386 is not provided by port antlr. DEBUG: Requested variant macosx is not provided by port antlr. DEBUG: No need to upgrade! antlr 2.7.7_0 >= antlr 2.7.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/math/gsl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gsl 1.14_0 exists in the ports tree DEBUG: gsl 1.14_0 +darwin_i386 is the latest installed DEBUG: gsl 1.14_0 +darwin_i386 is active DEBUG: Merging existing variants darwin_i386 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/gsl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port gsl. DEBUG: Requested variant i386 is not provided by port gsl. DEBUG: Requested variant macosx is not provided by port gsl. DEBUG: Executing variant darwin_i386 provides darwin_i386 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: texinfo 4.13_0 exists in the ports tree DEBUG: texinfo 4.13_0 is the latest installed DEBUG: texinfo 4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port texinfo. DEBUG: Requested variant i386 is not provided by port texinfo. DEBUG: Requested variant macosx is not provided by port texinfo. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lzmautils 4.32.7_1 exists in the ports tree DEBUG: lzmautils 4.32.7_1 is the latest installed DEBUG: lzmautils 4.32.7_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port lzmautils. DEBUG: Requested variant i386 is not provided by port lzmautils. DEBUG: Requested variant macosx is not provided by port lzmautils. DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0 DEBUG: No need to upgrade! gsl 1.14_0 >= gsl 1.14_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bison 2.4.2_0 exists in the ports tree DEBUG: bison 2.4.2_0 is the latest installed DEBUG: bison 2.4.2_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port bison. DEBUG: Requested variant i386 is not provided by port bison. DEBUG: Requested variant macosx is not provided by port bison. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.14_0 exists in the ports tree DEBUG: m4 1.4.14_0 is the latest installed DEBUG: m4 1.4.14_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.14_0 >= m4 1.4.14_0 DEBUG: No need to upgrade! bison 2.4.2_0 >= bison 2.4.2_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/wget DEBUG: epoch: in tree: 0 installed: 0 DEBUG: wget 1.12_0 exists in the ports tree DEBUG: wget 1.12_0 is the latest installed DEBUG: wget 1.12_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/wget DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port wget. DEBUG: Requested variant i386 is not provided by port wget. DEBUG: Requested variant macosx is not provided by port wget. DEBUG: No need to upgrade! wget 1.12_0 >= wget 1.12_0 ---> Computing dependencies for nco DEBUG: Searching for dependency: curl DEBUG: Found Dependency: receipt exists for curl DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: libxml2 DEBUG: Found Dependency: receipt exists for libxml2 DEBUG: Searching for dependency: netcdf-devel DEBUG: Found Dependency: receipt exists for netcdf-devel DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: udunits DEBUG: Found Dependency: receipt exists for udunits DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: antlr DEBUG: Found Dependency: receipt exists for antlr DEBUG: Searching for dependency: gsl DEBUG: Found Dependency: receipt exists for gsl DEBUG: Searching for dependency: hdf5-18 DEBUG: Found Dependency: receipt exists for hdf5-18 DEBUG: Searching for dependency: szip DEBUG: Found Dependency: receipt exists for szip DEBUG: Searching for dependency: bison DEBUG: Found Dependency: receipt exists for bison DEBUG: Searching for dependency: m4 DEBUG: Found Dependency: receipt exists for m4 DEBUG: Searching for dependency: wget DEBUG: Found Dependency: receipt exists for wget DEBUG: Executing org.macports.main (nco) DEBUG: Skipping completed org.macports.fetch (nco) DEBUG: Skipping completed org.macports.checksum (nco) DEBUG: Skipping completed org.macports.extract (nco) DEBUG: Skipping completed org.macports.patch (nco) DEBUG: Skipping completed org.macports.configure (nco) ---> Building nco DEBUG: Executing org.macports.build (nco) DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_nco/work/nco-4.0.1" && /usr/bin/make -j9 all' /usr/bin/make all-recursive Making all in data make[2]: Nothing to be done for `all'. Making all in src Making all in nco /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncap ncap_utl.o ncap.o ncap_yacc.o ncap_lex.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncbo ncbo.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncatted ncatted.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncecat ncecat.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncflint ncflint.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncks ncks.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncpdq ncpdq.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncra ncra.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits /bin/sh ../../libtool --tag=CXX --tag=CC --mode=link /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib -L/opt/local/lib -o ncrename ncrename.o libnco.la -ludunits -lgsl -L/opt/local/lib -lgsl -lgslcblas -lm -lresolv -lintl -lm -lnetcdf -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncap ncap_utl.o ncap.o ncap_yacc.o ncap_lex.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncks ncks.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncbo ncbo.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncflint ncflint.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncecat ncecat.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncrename ncrename.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncra ncra.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncpdq ncpdq.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits libtool: link: /usr/bin/gcc-4.2 -std=gnu99 -fno-common -O2 -arch x86_64 -std=c99 -D_BSD_SOURCE -o ncatted ncatted.o -L/opt/local/lib/netcdf-devel/lib -L/opt/local/lib ./.libs/libnco.a -L/lib /opt/local/lib/libgsl.dylib /opt/local/lib/libgslcblas.dylib -lresolv /opt/local/lib/netcdf-devel/lib/libnetcdf.a /opt/local/lib/libcurl.dylib /opt/local/lib/libidn.dylib /opt/local/lib/libintl.dylib -lc /opt/local/lib/libiconv.dylib -lssl -lcrypto /opt/local/lib/libhdf5_hl.dylib /opt/local/lib/libhdf5.dylib /opt/local/lib/libsz.dylib -lz -lm -ludunits ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_att_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4attr.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_vara_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4var.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_vara_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4var.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status make[3]: *** [ncap] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [ncks] Error 1 make[3]: *** [ncecat] Error 1 ld: warning: directory '/lib'ld :following -L warningnot: founddirectory '/ldlib: 'duplicate following -symbolL _nc_get_vara_string notin found/ optld/:local /duplicatelib /symbolnetcdf -_nc_get_vara_stringdevel /inlib //libnetcdf.aopt(/nc4var.olocal)/ liband/ netcdf.-/devel./libslib//libnco.alibnetcdf.a((nco_netcdf.onc4var.o)) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status collect2: ld returned 1 exit status make[3]: *** [ncbo] Error 1 make[3]: *** [ncflint] Error 1 ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_vara_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4var.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status make[3]: *** [ncrename] Error 1 ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_att_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4attr.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_vara_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4var.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status make[3]: *** [ncra] Error 1 make[3]: *** [ncpdq] Error 1 ld: warning: directory '/lib' following -L not found ld: duplicate symbol _nc_get_vara_string in /opt/local/lib/netcdf-devel/lib/libnetcdf.a(nc4var.o) and ./.libs/libnco.a(nco_netcdf.o) collect2: ld returned 1 exit status make[3]: *** [ncatted] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_nco/work/nco-4.0.1" && /usr/bin/make -j9 all " returned error 2 DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_nco/work/nco-4.0.1" && /usr/bin/make -j9 all " returned error 2 while executing "command_exec build" (procedure "portbuild::build_main" line 9) invoked from within "$procedure $targetname" Warning: the following items did not execute (for nco): org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see