kdelibs4-experimental 4.4.0_0 Error: Target org.macports.checksum returned: Unable to verify file checksums

[maillists@…]

Get the Unable to verify checksum errors, even if I remove the portfile, and it redownloads it.

here is the backtrace: DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port kdelibs4-experimental. DEBUG: Requested variant i386 is not provided by port kdelibs4-experimental. DEBUG: Requested variant macosx is not provided by port kdelibs4-experimental. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac DEBUG: epoch: in tree: 0 installed: 0 DEBUG: qt4-mac 4.6.2_0 exists in the ports tree DEBUG: qt4-mac 4.6.2_0 +universal is the latest installed DEBUG: qt4-mac 4.6.2_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port qt4-mac. DEBUG: Requested variant i386 is not provided by port qt4-mac. DEBUG: Requested variant macosx is not provided by port qt4-mac. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.23_1 exists in the ports tree DEBUG: pkgconfig 0.23_1 +universal is the latest installed DEBUG: pkgconfig 0.23_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port pkgconfig. DEBUG: Requested variant i386 is not provided by port pkgconfig. DEBUG: Requested variant macosx is not provided by port pkgconfig. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 +universal is the latest installed DEBUG: zlib 1.2.3_4 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus 1.2.16_1 exists in the ports tree DEBUG: dbus 1.2.16_1 +universal is the latest installed DEBUG: dbus 1.2.16_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port dbus. DEBUG: Requested variant i386 is not provided by port dbus. DEBUG: Requested variant macosx is not provided by port dbus. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_1 exists in the ports tree DEBUG: autoconf 2.65_1 is the latest installed DEBUG: autoconf 2.65_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 +universal is the latest installed DEBUG: perl5.8 5.8.9_3 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 +universal is the latest installed DEBUG: m4 1.4.13_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 +universal is the latest installed DEBUG: help2man 1.37.1_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_2 exists in the ports tree DEBUG: p5-locale-gettext 1.05_2 is the latest installed DEBUG: p5-locale-gettext 1.05_2 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 +universal is the latest installed DEBUG: gettext 0.17_4 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 +universal is the latest installed DEBUG: libiconv 1.13.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 +universal is the latest installed DEBUG: gperf 3.0.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10+universal is the latest installed DEBUG: ncurses 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10+universal is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10+universal is active DEBUG: Merging existing variants darwin_10 universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 +universal is the latest installed DEBUG: expat 2.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_2 >= p5-locale-gettext 1.05_2 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_1 >= autoconf 2.65_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 +universal is the latest installed DEBUG: automake 1.11.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_1 exists in the ports tree DEBUG: libtool 2.2.6b_1 +darwin+universal is the latest installed DEBUG: libtool 2.2.6b_1 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libtool 2.2.6b_1 >= libtool 2.2.6b_1 DEBUG: No need to upgrade! dbus 1.2.16_1 >= dbus 1.2.16_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8m_0 exists in the ports tree DEBUG: openssl 0.9.8m_0 +darwin+universal is the latest installed DEBUG: openssl 0.9.8m_0 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8m_0 >= openssl 0.9.8m_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.6.22_0 exists in the ports tree DEBUG: sqlite3 3.6.22_0 +universal is the latest installed DEBUG: sqlite3 3.6.22_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port sqlite3. DEBUG: Requested variant i386 is not provided by port sqlite3. DEBUG: Requested variant macosx is not provided by port sqlite3. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.1.000_1 exists in the ports tree DEBUG: readline 6.1.000_1 +darwin+universal is the latest installed DEBUG: readline 6.1.000_1 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port readline. DEBUG: Requested variant macosx is not provided by port readline. DEBUG: Executing variant universal provides universal DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! readline 6.1.000_1 >= readline 6.1.000_1 DEBUG: No need to upgrade! sqlite3 3.6.22_0 >= sqlite3 3.6.22_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.2_2 exists in the ports tree DEBUG: tiff 3.9.2_2 +macosx+universal is the latest installed DEBUG: tiff 3.9.2_2 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port tiff. DEBUG: Requested variant i386 is not provided by port tiff. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 7_0 exists in the ports tree DEBUG: jpeg 7_0 +universal is the latest installed DEBUG: jpeg 7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port jpeg. DEBUG: Requested variant i386 is not provided by port jpeg. DEBUG: Requested variant macosx is not provided by port jpeg. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! jpeg 7_0 >= jpeg 7_0 DEBUG: No need to upgrade! tiff 3.9.2_2 >= tiff 3.9.2_2 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.2.42_0 exists in the ports tree DEBUG: libpng 1.2.42_0 +universal is the latest installed DEBUG: libpng 1.2.42_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpng. DEBUG: Requested variant i386 is not provided by port libpng. DEBUG: Requested variant macosx is not provided by port libpng. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libpng 1.2.42_0 >= libpng 1.2.42_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libmng 1.0.10_1 exists in the ports tree DEBUG: libmng 1.0.10_1 +universal is the latest installed DEBUG: libmng 1.0.10_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libmng. DEBUG: Requested variant i386 is not provided by port libmng. DEBUG: Requested variant macosx is not provided by port libmng. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lcms 1.19_1 exists in the ports tree DEBUG: lcms 1.19_1 +universal is the latest installed DEBUG: lcms 1.19_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port lcms. DEBUG: Requested variant i386 is not provided by port lcms. DEBUG: Requested variant macosx is not provided by port lcms. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! lcms 1.19_1 >= lcms 1.19_1 DEBUG: No need to upgrade! libmng 1.0.10_1 >= libmng 1.0.10_1 DEBUG: No need to upgrade! qt4-mac 4.6.2_0 >= qt4-mac 4.6.2_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: kdelibs4 4.4.1_0 exists in the ports tree DEBUG: kdelibs4 4.4.1_0 +docs+universal is the latest installed DEBUG: kdelibs4 4.4.1_0 +docs+universal is active DEBUG: Merging existing variants docs universal into variants DEBUG: new fully merged portvariants: universal + docs + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port kdelibs4. DEBUG: Requested variant i386 is not provided by port kdelibs4. DEBUG: Requested variant macosx is not provided by port kdelibs4. DEBUG: Executing variant docs provides docs DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cmake 2.8.0_0 exists in the ports tree DEBUG: cmake 2.8.0_0 +universal is the latest installed DEBUG: cmake 2.8.0_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cmake. DEBUG: Requested variant i386 is not provided by port cmake. DEBUG: Requested variant macosx is not provided by port cmake. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libidn 1.16_0 exists in the ports tree DEBUG: libidn 1.16_0 +universal is the latest installed DEBUG: libidn 1.16_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libidn. DEBUG: Requested variant i386 is not provided by port libidn. DEBUG: Requested variant macosx is not provided by port libidn. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libidn 1.16_0 >= libidn 1.16_0 DEBUG: No need to upgrade! cmake 2.8.0_0 >= cmake 2.8.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automoc 0.9.88_1 exists in the ports tree DEBUG: automoc 0.9.88_1 +docs+universal is the latest installed DEBUG: automoc 0.9.88_1 +docs+universal is active DEBUG: Merging existing variants docs universal into variants DEBUG: new fully merged portvariants: universal + docs + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automoc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automoc. DEBUG: Requested variant i386 is not provided by port automoc. DEBUG: Requested variant macosx is not provided by port automoc. DEBUG: Executing variant docs provides docs DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen DEBUG: epoch: in tree: 0 installed: 0 DEBUG: doxygen 1.6.2_0 exists in the ports tree DEBUG: doxygen 1.6.2_0 +darwin is the latest installed DEBUG: doxygen 1.6.2_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/doxygen DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant i386 is not provided by port doxygen. DEBUG: Requested variant macosx is not provided by port doxygen. DEBUG: Executing variant darwin provides darwin DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex DEBUG: epoch: in tree: 0 installed: 0 DEBUG: flex 2.5.35_0 exists in the ports tree DEBUG: flex 2.5.35_0 +universal is the latest installed DEBUG: flex 2.5.35_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/flex DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port flex. DEBUG: Requested variant i386 is not provided by port flex. DEBUG: Requested variant macosx is not provided by port flex. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! flex 2.5.35_0 >= flex 2.5.35_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bison 2.4.1_0 exists in the ports tree DEBUG: bison 2.4.1_0 +universal is the latest installed DEBUG: bison 2.4.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/bison DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port bison. DEBUG: Requested variant i386 is not provided by port bison. DEBUG: Requested variant macosx is not provided by port bison. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! bison 2.4.1_0 >= bison 2.4.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: coreutils 8.4_0 exists in the ports tree DEBUG: coreutils 8.4_0 +universal is the latest installed DEBUG: coreutils 8.4_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/coreutils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port coreutils. DEBUG: Requested variant i386 is not provided by port coreutils. DEBUG: Requested variant macosx is not provided by port coreutils. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmp 5.0.1_0 exists in the ports tree DEBUG: gmp 5.0.1_0 +universal is the latest installed DEBUG: gmp 5.0.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gmp. DEBUG: Requested variant i386 is not provided by port gmp. DEBUG: Requested variant macosx is not provided by port gmp. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 DEBUG: No need to upgrade! coreutils 8.4_0 >= coreutils 8.4_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz DEBUG: epoch: in tree: 0 installed: 0 DEBUG: graphviz 2.26.3_0 exists in the ports tree DEBUG: graphviz 2.26.3_0 +macosx+universal is the latest installed DEBUG: graphviz 2.26.3_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/graphviz DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port graphviz. DEBUG: Requested variant i386 is not provided by port graphviz. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXaw 1.0.7_0 exists in the ports tree DEBUG: xorg-libXaw 1.0.7_0 +universal is the latest installed DEBUG: xorg-libXaw 1.0.7_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXaw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXaw. DEBUG: Requested variant i386 is not provided by port xorg-libXaw. DEBUG: Requested variant macosx is not provided by port xorg-libXaw. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff DEBUG: epoch: in tree: 0 installed: 0 DEBUG: groff 1.20.1_1 exists in the ports tree DEBUG: groff 1.20.1_1 +universal is the latest installed DEBUG: groff 1.20.1_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port groff. DEBUG: Requested variant i386 is not provided by port groff. DEBUG: Requested variant macosx is not provided by port groff. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libsm 1.1.1_0 exists in the ports tree DEBUG: xorg-libsm 1.1.1_0 +universal is the latest installed DEBUG: xorg-libsm 1.1.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libsm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libsm. DEBUG: Requested variant i386 is not provided by port xorg-libsm. DEBUG: Requested variant macosx is not provided by port xorg-libsm. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree DEBUG: xorg-xtrans 1.2.5_0 is the latest installed DEBUG: xorg-xtrans 1.2.5_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xtrans DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xtrans. DEBUG: Requested variant i386 is not provided by port xorg-xtrans. DEBUG: Requested variant macosx is not provided by port xorg-xtrans. DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libice 1.0.6_0 exists in the ports tree DEBUG: xorg-libice 1.0.6_0 +universal is the latest installed DEBUG: xorg-libice 1.0.6_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libice DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libice. DEBUG: Requested variant i386 is not provided by port xorg-libice. DEBUG: Requested variant macosx is not provided by port xorg-libice. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree DEBUG: xorg-xproto 7.0.16_0 is the latest installed DEBUG: xorg-xproto 7.0.16_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xproto. DEBUG: Requested variant i386 is not provided by port xorg-xproto. DEBUG: Requested variant macosx is not provided by port xorg-xproto. DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0 DEBUG: No need to upgrade! xorg-libice 1.0.6_0 >= xorg-libice 1.0.6_0 DEBUG: No need to upgrade! xorg-libsm 1.1.1_0 >= xorg-libsm 1.1.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.1.1_0 exists in the ports tree DEBUG: xorg-libXext 1.1.1_0 +universal is the latest installed DEBUG: xorg-libXext 1.1.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXext. DEBUG: Requested variant i386 is not provided by port xorg-libXext. DEBUG: Requested variant macosx is not provided by port xorg-libXext. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.3.3_0 exists in the ports tree DEBUG: xorg-libX11 1.3.3_0 +universal is the latest installed DEBUG: xorg-libX11 1.3.3_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libX11 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libX11. DEBUG: Requested variant i386 is not provided by port xorg-libX11. DEBUG: Requested variant macosx is not provided by port xorg-libX11. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-util-macros 1.6.0_0 exists in the ports tree DEBUG: xorg-util-macros 1.6.0_0 is the latest installed DEBUG: xorg-util-macros 1.6.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-util-macros DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-util-macros. DEBUG: Requested variant i386 is not provided by port xorg-util-macros. DEBUG: Requested variant macosx is not provided by port xorg-util-macros. DEBUG: No need to upgrade! xorg-util-macros 1.6.0_0 >= xorg-util-macros 1.6.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree DEBUG: xorg-bigreqsproto 1.1.0_0 is the latest installed DEBUG: xorg-bigreqsproto 1.1.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-bigreqsproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto. DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto. DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto. DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto 1.1.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xcmiscproto 1.2.0_0 is the latest installed DEBUG: xorg-xcmiscproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xcmiscproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto. DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto. DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto. DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto 1.2.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.1.1_0 is the latest installed DEBUG: xorg-xextproto 7.1.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xextproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xextproto. DEBUG: Requested variant i386 is not provided by port xorg-xextproto. DEBUG: Requested variant macosx is not provided by port xorg-xextproto. DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto 7.1.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree DEBUG: xorg-xf86bigfontproto 1.2.0_0 is the latest installed DEBUG: xorg-xf86bigfontproto 1.2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-xf86bigfontproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant i386 is not provided by port xorg-xf86bigfontproto. DEBUG: Requested variant macosx is not provided by port xorg-xf86bigfontproto. DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-xf86bigfontproto 1.2.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree DEBUG: xorg-inputproto 2.0_0 is the latest installed DEBUG: xorg-inputproto 2.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-inputproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-inputproto. DEBUG: Requested variant i386 is not provided by port xorg-inputproto. DEBUG: Requested variant macosx is not provided by port xorg-inputproto. DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.0.3_0 +universal is the latest installed DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXdmcp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp. DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp. DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree DEBUG: xorg-libXau 1.0.5_0 +universal is the latest installed DEBUG: xorg-libXau 1.0.5_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXau DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXau. DEBUG: Requested variant i386 is not provided by port xorg-libXau. DEBUG: Requested variant macosx is not provided by port xorg-libXau. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.4_0 is the latest installed DEBUG: xorg-kbproto 1.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-kbproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-kbproto. DEBUG: Requested variant i386 is not provided by port xorg-kbproto. DEBUG: Requested variant macosx is not provided by port xorg-kbproto. DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0 DEBUG: No need to upgrade! xorg-libX11 1.3.3_0 >= xorg-libX11 1.3.3_0 DEBUG: No need to upgrade! xorg-libXext 1.1.1_0 >= xorg-libXext 1.1.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXmu 1.0.5_0 exists in the ports tree DEBUG: xorg-libXmu 1.0.5_0 +universal is the latest installed DEBUG: xorg-libXmu 1.0.5_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXmu DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXmu. DEBUG: Requested variant i386 is not provided by port xorg-libXmu. DEBUG: Requested variant macosx is not provided by port xorg-libXmu. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXt 1.0.7_1 exists in the ports tree DEBUG: xorg-libXt 1.0.7_1 +universal is the latest installed DEBUG: xorg-libXt 1.0.7_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-libXt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xorg-libXt. DEBUG: Requested variant i386 is not provided by port xorg-libXt. DEBUG: Requested variant macosx is not provided by port xorg-libXt. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xorg-libXt 1.0.7_1 >= xorg-libXt 1.0.7_1 DEBUG: No need to upgrade! xorg-libXmu 1.0.5_0 >= xorg-libXmu 1.0.5_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xpm 3.5.8_0 exists in the ports tree DEBUG: xpm 3.5.8_0 +universal is the latest installed DEBUG: xpm 3.5.8_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xpm. DEBUG: Requested variant i386 is not provided by port xpm. DEBUG: Requested variant macosx is not provided by port xpm. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! xpm 3.5.8_0 >= xpm 3.5.8_0 DEBUG: No need to upgrade! xorg-libXaw 1.0.7_0 >= xorg-libXaw 1.0.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: epoch: in tree: 1 installed: 1 DEBUG: pango 1.24.5_0 exists in the ports tree DEBUG: pango 1.24.5_0 +macosx+universal is the latest installed DEBUG: pango 1.24.5_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/pango DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port pango. DEBUG: Requested variant i386 is not provided by port pango. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.22.4_1 exists in the ports tree DEBUG: glib2 2.22.4_1 +darwin+universal is the latest installed DEBUG: glib2 2.22.4_1 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant i386 is not provided by port glib2. DEBUG: Requested variant macosx is not provided by port glib2. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select DEBUG: python_select is *not* installed by MacPorts DEBUG: Searching for dependency: python_select DEBUG: Didn't find receipt, going to depspec regex for: python_select DEBUG: Found Dependency: path: /usr/bin filename: python regex: ^{python$ DEBUG: python_select not installed, soft dependency satisfied DEBUG: No need to upgrade! glib2 2.22.4_1 >= glib2 2.22.4_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.1.14_0 exists in the ports tree DEBUG: Xft2 2.1.14_0 +universal is the latest installed DEBUG: Xft2 2.1.14_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/Xft2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port Xft2. DEBUG: Requested variant i386 is not provided by port Xft2. DEBUG: Requested variant macosx is not provided by port Xft2. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.5_0 exists in the ports tree DEBUG: xrender 0.9.5_0 +universal is the latest installed DEBUG: xrender 0.9.5_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xrender DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port xrender. DEBUG: Requested variant i386 is not provided by port xrender. DEBUG: Requested variant macosx is not provided by port xrender. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11_0 exists in the ports tree DEBUG: xorg-renderproto 0.11_0 is the latest installed DEBUG: xorg-renderproto 0.11_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-renderproto DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port xorg-renderproto. DEBUG: Requested variant i386 is not provided by port xorg-renderproto. DEBUG: Requested variant macosx is not provided by port xorg-renderproto. DEBUG: No need to upgrade! xorg-renderproto 0.11_0 >= xorg-renderproto 0.11_0 DEBUG: No need to upgrade! xrender 0.9.5_0 >= xrender 0.9.5_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.3.12_0 exists in the ports tree DEBUG: freetype 2.3.12_0 +macosx+universal is the latest installed DEBUG: freetype 2.3.12_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/freetype DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port freetype. DEBUG: Requested variant i386 is not provided by port freetype. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! freetype 2.3.12_0 >= freetype 2.3.12_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.8.0_0 exists in the ports tree DEBUG: fontconfig 2.8.0_0 +macosx+universal is the latest installed DEBUG: fontconfig 2.8.0_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/fontconfig DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port fontconfig. DEBUG: Requested variant i386 is not provided by port fontconfig. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: No need to upgrade! fontconfig 2.8.0_0 >= fontconfig 2.8.0_0 DEBUG: No need to upgrade! Xft2 2.1.14_0 >= Xft2 2.1.14_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cairo 1.8.10_0 exists in the ports tree DEBUG: cairo 1.8.10_0 +macosx+universal is the latest installed DEBUG: cairo 1.8.10_0 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/cairo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cairo. DEBUG: Requested variant i386 is not provided by port cairo. DEBUG: Executing variant universal provides universal DEBUG: Executing variant macosx provides macosx DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpixman 0.16.6_0 exists in the ports tree DEBUG: libpixman 0.16.6_0 +universal is the latest installed DEBUG: libpixman 0.16.6_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpixman DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libpixman. DEBUG: Requested variant i386 is not provided by port libpixman. DEBUG: Requested variant macosx is not provided by port libpixman. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libpixman 0.16.6_0 >= libpixman 0.16.6_0 DEBUG: No need to upgrade! cairo 1.8.10_0 >= cairo 1.8.10_0 DEBUG: No need to upgrade! pango 1.24.5_0 >= pango 1.24.5_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gd2 2.0.35_6 exists in the ports tree DEBUG: gd2 2.0.35_6 +universal is the latest installed DEBUG: gd2 2.0.35_6 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/gd2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gd2. DEBUG: Requested variant i386 is not provided by port gd2. DEBUG: Requested variant macosx is not provided by port gd2. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gd2 2.0.35_6 >= gd2 2.0.35_6 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ghostscript 8.71_1 exists in the ports tree DEBUG: ghostscript 8.71_1 is the latest installed DEBUG: ghostscript 8.71_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/print/ghostscript DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port ghostscript. DEBUG: Requested variant i386 is not provided by port ghostscript. DEBUG: Requested variant macosx is not provided by port ghostscript. DEBUG: No need to upgrade! ghostscript 8.71_1 >= ghostscript 8.71_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-fonts DEBUG: epoch: in tree: 0 installed: 0 DEBUG: urw-fonts 1.0.7pre44_0 exists in the ports tree DEBUG: urw-fonts 1.0.7pre44_0 is the latest installed DEBUG: urw-fonts 1.0.7pre44_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/urw-fonts DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port urw-fonts. DEBUG: Requested variant i386 is not provided by port urw-fonts. DEBUG: Requested variant macosx is not provided by port urw-fonts. DEBUG: No need to upgrade! urw-fonts 1.0.7pre44_0 >= urw-fonts 1.0.7pre44_0 DEBUG: No need to upgrade! graphviz 2.26.3_0 >= graphviz 2.26.3_0 DEBUG: No need to upgrade! doxygen 1.6.2_0 >= doxygen 1.6.2_0 DEBUG: No need to upgrade! automoc 0.9.88_1 >= automoc 0.9.88_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmake 3.81_0 exists in the ports tree DEBUG: gmake 3.81_0 +universal is the latest installed DEBUG: gmake 3.81_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port gmake. DEBUG: Requested variant i386 is not provided by port gmake. DEBUG: Requested variant macosx is not provided by port gmake. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gmake 3.81_0 >= gmake 3.81_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.5_3 exists in the ports tree DEBUG: bzip2 1.0.5_3 +darwin+universal is the latest installed DEBUG: bzip2 1.0.5_3 +darwin+universal is active DEBUG: Merging existing variants darwin universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port bzip2. DEBUG: Requested variant macosx is not provided by port bzip2. DEBUG: Executing variant darwin provides darwin DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! bzip2 1.0.5_3 >= bzip2 1.0.5_3 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano DEBUG: epoch: in tree: 0 installed: 0 DEBUG: soprano 2.4.1_0 exists in the ports tree DEBUG: soprano 2.4.1_0 +docs+universal is the latest installed DEBUG: soprano 2.4.1_0 +docs+universal is active DEBUG: Merging existing variants docs universal into variants DEBUG: new fully merged portvariants: universal + docs + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/soprano DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port soprano. DEBUG: Requested variant i386 is not provided by port soprano. DEBUG: Requested variant macosx is not provided by port soprano. DEBUG: Executing variant docs provides docs DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene DEBUG: epoch: in tree: 0 installed: 0 DEBUG: clucene 0.9.21b_0 exists in the ports tree DEBUG: clucene 0.9.21b_0 +universal is the latest installed DEBUG: clucene 0.9.21b_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/clucene DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port clucene. DEBUG: Requested variant i386 is not provided by port clucene. DEBUG: Requested variant macosx is not provided by port clucene. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! clucene 0.9.21b_0 >= clucene 0.9.21b_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi DEBUG: epoch: in tree: 0 installed: 0 DEBUG: strigi 0.6.3_2 exists in the ports tree DEBUG: strigi 0.6.3_2 +universal is the latest installed DEBUG: strigi 0.6.3_2 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/strigi DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port strigi. DEBUG: Requested variant i386 is not provided by port strigi. DEBUG: Requested variant macosx is not provided by port strigi. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.6_0 exists in the ports tree DEBUG: libxml2 2.7.6_0 +universal is the latest installed DEBUG: libxml2 2.7.6_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libxml2 2.7.6_0 >= libxml2 2.7.6_0 DEBUG: No need to upgrade! strigi 0.6.3_2 >= strigi 0.6.3_2 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland DEBUG: epoch: in tree: 0 installed: 0 DEBUG: redland 1.0.10_2 exists in the ports tree DEBUG: redland 1.0.10_2 +db46+universal is the latest installed DEBUG: redland 1.0.10_2 +db46+universal is active DEBUG: Merging existing variants db46 universal into variants DEBUG: new fully merged portvariants: db46 + universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/redland DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port redland. DEBUG: Requested variant i386 is not provided by port redland. DEBUG: Requested variant macosx is not provided by port redland. DEBUG: Executing variant db46 provides db46 DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: curl 7.20.0_0 exists in the ports tree DEBUG: curl 7.20.0_0 +ssl+universal is the latest installed DEBUG: curl 7.20.0_0 +ssl+universal is active DEBUG: Merging existing variants ssl universal into variants DEBUG: new fully merged portvariants: universal + ssl + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant universal provides universal DEBUG: Executing variant ssl provides ssl DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle DEBUG: epoch: in tree: 0 installed: 0 DEBUG: curl-ca-bundle 7.20.0_0 exists in the ports tree DEBUG: curl-ca-bundle 7.20.0_0 is the latest installed DEBUG: curl-ca-bundle 7.20.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl-ca-bundle DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port curl-ca-bundle. DEBUG: Requested variant i386 is not provided by port curl-ca-bundle. DEBUG: Requested variant macosx is not provided by port curl-ca-bundle. DEBUG: No need to upgrade! curl-ca-bundle 7.20.0_0 >= curl-ca-bundle 7.20.0_0 DEBUG: No need to upgrade! curl 7.20.0_0 >= curl 7.20.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxslt 1.1.26_0 exists in the ports tree DEBUG: libxslt 1.1.26_0 +universal is the latest installed DEBUG: libxslt 1.1.26_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxslt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libxslt. DEBUG: Requested variant i386 is not provided by port libxslt. DEBUG: Requested variant macosx is not provided by port libxslt. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree DEBUG: mpfr 2.4.2-p1_0 +universal is the latest installed DEBUG: mpfr 2.4.2-p1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port mpfr. DEBUG: Requested variant i386 is not provided by port mpfr. DEBUG: Requested variant macosx is not provided by port mpfr. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor DEBUG: epoch: in tree: 0 installed: 0 DEBUG: raptor 1.4.21_0 exists in the ports tree DEBUG: raptor 1.4.21_0 +universal is the latest installed DEBUG: raptor 1.4.21_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/raptor DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port raptor. DEBUG: Requested variant i386 is not provided by port raptor. DEBUG: Requested variant macosx is not provided by port raptor. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! raptor 1.4.21_0 >= raptor 1.4.21_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal DEBUG: epoch: in tree: 0 installed: 0 DEBUG: rasqal 0.9.19_0 exists in the ports tree DEBUG: rasqal 0.9.19_0 +universal is the latest installed DEBUG: rasqal 0.9.19_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/www/rasqal DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rasqal. DEBUG: Requested variant i386 is not provided by port rasqal. DEBUG: Requested variant macosx is not provided by port rasqal. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! rasqal 0.9.19_0 >= rasqal 0.9.19_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 +universal is the latest installed DEBUG: db46 4.6.21_6 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port db46. DEBUG: Requested variant i386 is not provided by port db46. DEBUG: Requested variant macosx is not provided by port db46. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: No need to upgrade! redland 1.0.10_2 >= redland 1.0.10_2 DEBUG: No need to upgrade! soprano 2.4.1_0 >= soprano 2.4.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cyrus-sasl2 2.1.23_1 exists in the ports tree DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is the latest installed DEBUG: cyrus-sasl2 2.1.23_1 +kerberos+universal is active DEBUG: Merging existing variants kerberos universal into variants DEBUG: new fully merged portvariants: universal + kerberos + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security/cyrus-sasl2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port cyrus-sasl2. DEBUG: Requested variant i386 is not provided by port cyrus-sasl2. DEBUG: Requested variant macosx is not provided by port cyrus-sasl2. DEBUG: Executing variant universal provides universal DEBUG: Executing variant kerberos provides kerberos DEBUG: No need to upgrade! cyrus-sasl2 2.1.23_1 >= cyrus-sasl2 2.1.23_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pcre 7.9_0 exists in the ports tree DEBUG: pcre 7.9_0 +universal is the latest installed DEBUG: pcre 7.9_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pcre DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port pcre. DEBUG: Requested variant i386 is not provided by port pcre. DEBUG: Requested variant macosx is not provided by port pcre. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! pcre 7.9_0 >= pcre 7.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: epoch: in tree: 0 installed: 0 DEBUG: shared-mime-info 0.71_0 exists in the ports tree DEBUG: shared-mime-info 0.71_0 +universal is the latest installed DEBUG: shared-mime-info 0.71_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/shared-mime-info DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port shared-mime-info. DEBUG: Requested variant i386 is not provided by port shared-mime-info. DEBUG: Requested variant macosx is not provided by port shared-mime-info. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-xml-parser 2.36_0 exists in the ports tree DEBUG: p5-xml-parser 2.36_0 is the latest installed DEBUG: p5-xml-parser 2.36_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-xml-parser DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-xml-parser. DEBUG: Requested variant i386 is not provided by port p5-xml-parser. DEBUG: Requested variant macosx is not provided by port p5-xml-parser. DEBUG: No need to upgrade! p5-xml-parser 2.36_0 >= p5-xml-parser 2.36_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: intltool 0.40.6_0 exists in the ports tree DEBUG: intltool 0.40.6_0 is the latest installed DEBUG: intltool 0.40.6_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/intltool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port intltool. DEBUG: Requested variant i386 is not provided by port intltool. DEBUG: Requested variant macosx is not provided by port intltool. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gnome-common 2.26.0_0 exists in the ports tree DEBUG: gnome-common 2.26.0_0 is the latest installed DEBUG: gnome-common 2.26.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/gnome/gnome-common DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port gnome-common. DEBUG: Requested variant i386 is not provided by port gnome-common. DEBUG: Requested variant macosx is not provided by port gnome-common. DEBUG: No need to upgrade! gnome-common 2.26.0_0 >= gnome-common 2.26.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-getopt-long 2.38_0 exists in the ports tree DEBUG: p5-getopt-long 2.38_0 is the latest installed DEBUG: p5-getopt-long 2.38_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-getopt-long DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-getopt-long. DEBUG: Requested variant i386 is not provided by port p5-getopt-long. DEBUG: Requested variant macosx is not provided by port p5-getopt-long. DEBUG: No need to upgrade! p5-getopt-long 2.38_0 >= p5-getopt-long 2.38_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-pathtools 3.31_0 exists in the ports tree DEBUG: p5-pathtools 3.31_0 is the latest installed DEBUG: p5-pathtools 3.31_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-pathtools DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-pathtools. DEBUG: Requested variant i386 is not provided by port p5-pathtools. DEBUG: Requested variant macosx is not provided by port p5-pathtools. DEBUG: No need to upgrade! p5-pathtools 3.31_0 >= p5-pathtools 3.31_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-scalar-list-utils 1.22_0 exists in the ports tree DEBUG: p5-scalar-list-utils 1.22_0 is the latest installed DEBUG: p5-scalar-list-utils 1.22_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-scalar-list-utils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-scalar-list-utils. DEBUG: Requested variant i386 is not provided by port p5-scalar-list-utils. DEBUG: Requested variant macosx is not provided by port p5-scalar-list-utils. DEBUG: No need to upgrade! p5-scalar-list-utils 1.22_0 >= p5-scalar-list-utils 1.22_0 DEBUG: No need to upgrade! intltool 0.40.6_0 >= intltool 0.40.6_0 DEBUG: No need to upgrade! shared-mime-info 0.71_0 >= shared-mime-info 0.71_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: giflib 4.1.6_1 exists in the ports tree DEBUG: giflib 4.1.6_1 +universal is the latest installed DEBUG: giflib 4.1.6_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/giflib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port giflib. DEBUG: Requested variant i386 is not provided by port giflib. DEBUG: Requested variant macosx is not provided by port giflib. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! giflib 4.1.6_1 >= giflib 4.1.6_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jasper 1.900.1_6 exists in the ports tree DEBUG: jasper 1.900.1_6 +universal is the latest installed DEBUG: jasper 1.900.1_6 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jasper DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port jasper. DEBUG: Requested variant i386 is not provided by port jasper. DEBUG: Requested variant macosx is not provided by port jasper. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/unzip DEBUG: unzip is *not* installed by MacPorts DEBUG: Searching for dependency: unzip DEBUG: Didn't find receipt, going to depspec regex for: unzip DEBUG: Found Dependency: path: /usr/bin filename: unzip regex:} unzip$ DEBUG: unzip not installed, soft dependency satisfied DEBUG: No need to upgrade! jasper 1.900.1_6 >= jasper 1.900.1_6 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: openexr 1.6.1_1 exists in the ports tree DEBUG: openexr 1.6.1_1 +universal is the latest installed DEBUG: openexr 1.6.1_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/openexr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port openexr. DEBUG: Requested variant i386 is not provided by port openexr. DEBUG: Requested variant macosx is not provided by port openexr. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ilmbase 1.0.1_2 exists in the ports tree DEBUG: ilmbase 1.0.1_2 +universal is the latest installed DEBUG: ilmbase 1.0.1_2 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/ilmbase DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port ilmbase. DEBUG: Requested variant i386 is not provided by port ilmbase. DEBUG: Requested variant macosx is not provided by port ilmbase. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gsed 4.2.1_0 exists in the ports tree DEBUG: gsed 4.2.1_0 +universal is the latest installed DEBUG: gsed 4.2.1_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/gsed DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gsed. DEBUG: Requested variant i386 is not provided by port gsed. DEBUG: Requested variant macosx is not provided by port gsed. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! gsed 4.2.1_0 >= gsed 4.2.1_0 DEBUG: No need to upgrade! ilmbase 1.0.1_2 >= ilmbase 1.0.1_2 DEBUG: No need to upgrade! openexr 1.6.1_1 >= openexr 1.6.1_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libart_lgpl 2.3.20_0 exists in the ports tree DEBUG: libart_lgpl 2.3.20_0 +universal is the latest installed DEBUG: libart_lgpl 2.3.20_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libart_lgpl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libart_lgpl. DEBUG: Requested variant i386 is not provided by port libart_lgpl. DEBUG: Requested variant macosx is not provided by port libart_lgpl. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! libart_lgpl 2.3.20_0 >= libart_lgpl 2.3.20_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant DEBUG: epoch: in tree: 0 installed: 0 DEBUG: enchant 1.5.0_1 exists in the ports tree DEBUG: enchant 1.5.0_1 +universal is the latest installed DEBUG: enchant 1.5.0_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/enchant DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port enchant. DEBUG: Requested variant i386 is not provided by port enchant. DEBUG: Requested variant macosx is not provided by port enchant. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell DEBUG: epoch: in tree: 0 installed: 0 DEBUG: aspell 0.60.6_2 exists in the ports tree DEBUG: aspell 0.60.6_2 +macosx+universal is the latest installed DEBUG: aspell 0.60.6_2 +macosx+universal is active DEBUG: Merging existing variants macosx universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port aspell. DEBUG: Requested variant i386 is not provided by port aspell. DEBUG: Executing variant macosx provides macosx DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: epoch: in tree: 0 installed: 0 DEBUG: texinfo 4.13_0 exists in the ports tree DEBUG: texinfo 4.13_0 +universal is the latest installed DEBUG: texinfo 4.13_0 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/texinfo DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port texinfo. DEBUG: Requested variant i386 is not provided by port texinfo. DEBUG: Requested variant macosx is not provided by port texinfo. DEBUG: Executing variant universal provides universal DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lzmautils 4.32.7_1 exists in the ports tree DEBUG: lzmautils 4.32.7_1 +universal is the latest installed DEBUG: lzmautils 4.32.7_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzmautils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port lzmautils. DEBUG: Requested variant i386 is not provided by port lzmautils. DEBUG: Requested variant macosx is not provided by port lzmautils. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! lzmautils 4.32.7_1 >= lzmautils 4.32.7_1 DEBUG: No need to upgrade! texinfo 4.13_0 >= texinfo 4.13_0 DEBUG: No need to upgrade! aspell 0.60.6_2 >= aspell 0.60.6_2 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell DEBUG: epoch: in tree: 0 installed: 0 DEBUG: hunspell 1.2.8_1 exists in the ports tree DEBUG: hunspell 1.2.8_1 +universal is the latest installed DEBUG: hunspell 1.2.8_1 +universal is active DEBUG: Merging existing variants universal into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/hunspell DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port hunspell. DEBUG: Requested variant i386 is not provided by port hunspell. DEBUG: Requested variant macosx is not provided by port hunspell. DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! hunspell 1.2.8_1 >= hunspell 1.2.8_1 DEBUG: No need to upgrade! enchant 1.5.0_1 >= enchant 1.5.0_1 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell-dict-en DEBUG: epoch: in tree: 0 installed: 0 DEBUG: aspell-dict-en 6.0_0 exists in the ports tree DEBUG: aspell-dict-en 6.0_0 is the latest installed DEBUG: aspell-dict-en 6.0_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/aspell-dict-en DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port aspell-dict-en. DEBUG: Requested variant i386 is not provided by port aspell-dict-en. DEBUG: Requested variant macosx is not provided by port aspell-dict-en. DEBUG: No need to upgrade! aspell-dict-en 6.0_0 >= aspell-dict-en 6.0_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica DEBUG: epoch: in tree: 0 installed: 0 DEBUG: attica 0.1.2_0 exists in the ports tree DEBUG: attica 0.1.2_0 +docs+universal is the latest installed DEBUG: attica 0.1.2_0 +docs+universal is active DEBUG: Merging existing variants docs universal into variants DEBUG: new fully merged portvariants: universal + docs + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/attica DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/kde4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port attica. DEBUG: Requested variant i386 is not provided by port attica. DEBUG: Requested variant macosx is not provided by port attica. DEBUG: Executing variant docs provides docs DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! attica 0.1.2_0 >= attica 0.1.2_0 DEBUG: No need to upgrade! kdelibs4 4.4.1_0 >= kdelibs4 4.4.1_0 ---> Computing dependencies for kdelibs4-experimental DEBUG: Searching for dependency: qt4-mac DEBUG: Found Dependency: receipt exists for qt4-mac DEBUG: Searching for dependency: kdelibs4 DEBUG: Found Dependency: receipt exists for kdelibs4 DEBUG: Searching for dependency: cmake DEBUG: Found Dependency: receipt exists for cmake DEBUG: Searching for dependency: automoc DEBUG: Found Dependency: receipt exists for automoc DEBUG: Executing org.macports.main (kdelibs4-experimental) DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_kde_kdelibs4-experimental/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/kde/kdelibs4-experimental/work ---> Fetching kdelibs4-experimental DEBUG: Executing org.macports.fetch (kdelibs4-experimental) ---> Verifying checksum(s) for kdelibs4-experimental DEBUG: Executing org.macports.checksum (kdelibs4-experimental) ---> Checksumming kdelibs-experimental-4.4.0.tar.bz2 Error: Checksum (md5) mismatch for kdelibs-experimental-4.4.0.tar.bz2 Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5 5b6bf1e49f2e18ffcd844392928ad30e Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 md5 31fac25a746d2f9d318c5a37c938423e Error: Checksum (sha1) mismatch for kdelibs-experimental-4.4.0.tar.bz2 Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1 05936c4d3e0df7f135e9a1a4f430c2e9555d9b6e Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 sha1 a9a77d8dba9bf7b564af6d06d6dd98de993f505a Error: Checksum (rmd160) mismatch for kdelibs-experimental-4.4.0.tar.bz2 Portfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160 91cc4574fd48d96ee14e7197f71768dacc2f8909 Distfile checksum: kdelibs-experimental-4.4.0.tar.bz2 rmd160 9405166b0d27727818aa34c293473611959b5819 The correct checksum line may be: checksums md5 31fac25a746d2f9d318c5a37c938423e \

sha1 a9a77d8dba9bf7b564af6d06d6dd98de993f505a \ rmd160 9405166b0d27727818aa34c293473611959b5819

Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums

while executing

"$procedure $targetname" Warning: the following items did not execute (for kdelibs4-experimental): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets>