i386-elf-gcc configure error with build_arch i386

[orphen.leiliu@…]

Snow Leopard 10.6.3; Xcode 3.2.2; Macports 1.8.2

---

There is no problem with build_arch x86_64. Error followed.

---

localhost ~ $ sudo port -d install i386-elf-gcc DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386-elf-gcc DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386-elf-gcc DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port i386-elf-gcc. DEBUG: Requested variant ipv6 is not provided by port i386-elf-gcc. DEBUG: Requested variant i386 is not provided by port i386-elf-gcc. DEBUG: Requested variant doc is not provided by port i386-elf-gcc. DEBUG: Requested variant no_x11 is not provided by port i386-elf-gcc. DEBUG: Requested variant macosx is not provided by port i386-elf-gcc. DEBUG: Requested variant svn is not provided by port i386-elf-gcc. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386-elf-binutils DEBUG: epoch: in tree: 0 installed: 0 DEBUG: i386-elf-binutils 2.18.50.0.9_0 exists in the ports tree DEBUG: i386-elf-binutils 2.18.50.0.9_0 +darwin_10 is the latest installed DEBUG: i386-elf-binutils 2.18.50.0.9_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/cross/i386-elf-binutils DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: Requested variant darwin is not provided by port i386-elf-binutils. DEBUG: Requested variant i386 is not provided by port i386-elf-binutils. DEBUG: Requested variant macosx is not provided by port i386-elf-binutils. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! i386-elf-binutils 2.18.50.0.9_0 >= i386-elf-binutils 2.18.50.0.9_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gmp 5.0.1_0 exists in the ports tree DEBUG: gmp 5.0.1_0 is the latest installed DEBUG: gmp 5.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gmp. DEBUG: Requested variant i386 is not provided by port gmp. DEBUG: Requested variant macosx is not provided by port gmp. DEBUG: No need to upgrade! gmp 5.0.1_0 >= gmp 5.0.1_0 DEBUG: Found port in ​file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mpfr 2.4.2-p1_0 exists in the ports tree DEBUG: mpfr 2.4.2-p1_0 is the latest installed DEBUG: mpfr 2.4.2-p1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port mpfr. DEBUG: Requested variant i386 is not provided by port mpfr. DEBUG: Requested variant macosx is not provided by port mpfr. DEBUG: No need to upgrade! mpfr 2.4.2-p1_0 >= mpfr 2.4.2-p1_0 ---> Computing dependencies for i386-elf-gcc DEBUG: Searching for dependency: i386-elf-binutils DEBUG: Found Dependency: receipt exists for i386-elf-binutils DEBUG: Searching for dependency: gmp DEBUG: Found Dependency: receipt exists for gmp DEBUG: Searching for dependency: mpfr DEBUG: Found Dependency: receipt exists for mpfr DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Executing org.macports.main (i386-elf-gcc) DEBUG: Skipping completed org.macports.fetch (i386-elf-gcc) DEBUG: Skipping completed org.macports.checksum (i386-elf-gcc) DEBUG: setting option extract.cmd to /usr/bin/bzip2 DEBUG: Skipping completed org.macports.extract (i386-elf-gcc) DEBUG: Skipping completed org.macports.patch (i386-elf-gcc) ---> Configuring i386-elf-gcc DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: Executing proc-pre-org.macports.configure-configure-0 DEBUG: Executing org.macports.configure (i386-elf-gcc) DEBUG: Environment: AS_FOR_TARGET='i386-elf-as' CFLAGS='-O2' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-O2' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' F90FLAGS='-O2 -m32' LD_FOR_TARGET='i386-elf-ld' RANLIB_FOR_TARGET='i386-elf-ranlib' LDFLAGS='-L/opt/local/lib' FCFLAGS='-O2 -m32' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' AR_FOR_TARGET='i386-elf-ar' NM_FOR_TARGET='i386-elf-nm' FFLAGS='-O2 -m32' OBJCFLAGS='-O2' CC='cc -no-cpp-precomp -I/opt/local/include' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/build" && /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local --infodir='/opt/local/share/info' --mandir='/opt/local/share/man' --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2 --without-included-gettext --enable-obsolete --with-newlib --disable-libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/ --enable-languages="c,c++,objc"' checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking target system type... i386-pc-elf checking for a BSD-compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for gcc... cc -no-cpp-precomp -I/opt/local/include checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc -no-cpp-precomp -I/opt/local/include accepts -g... yes checking for cc -no-cpp-precomp -I/opt/local/include option to accept ANSI C... none needed checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.2 accepts -g... yes checking for gnatbind... no checking for gnatmake... no checking whether compiler driver understands Ada... no checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2 checking for correct version of gmp.h... yes checking for correct version of mpfr.h... no configure: error: Building GCC requires GMP 4.1+ and MPFR 2.3.0+. Try the --with-gmp and/or --with-mpfr options to specify their locations. Copies of these libraries' source code can be found at their respective hosting sites as well as at ​ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also ​http://gcc.gnu.org/install/prerequisites.html for additional info. If you obtained GMP and/or MPFR from a vendor distribution package, make sure that you have installed both the libraries and the header files. They may be located in separate packages. Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/build" && /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local --infodir='/opt/local/share/info' --mandir='/opt/local/share/man' --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2 --without-included-gettext --enable-obsolete --with-newlib --disable-libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/ --enable-languages="c,c++,objc" " returned error 1 DEBUG: Backtrace: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/build" && /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_cross_i386-elf-gcc/work/gcc-4.3.2/configure --prefix=/opt/local --infodir='/opt/local/share/info' --mandir='/opt/local/share/man' --target=i386-elf --program-prefix=i386-elf- --program-suffix=-4.3.2 --without-included-gettext --enable-obsolete --with-newlib --disable-libgfortran --with-gxx-include-dir=/opt/local/i386-elf/include/c++/4.3.2/ --enable-languages="c,c++,objc" " returned error 1

while executing

"$procedure $targetname" Warning: the following items did not execute (for i386-elf-gcc): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see <​http://guide.macports.org/#project.tickets> localhost ~ $ sudo port installed The following ports are currently installed:

bash-completion @1.1_6 (active) cscope @15.7a_0 (active) ctags @5.8_0 (active) curl @7.20.0_0+ssl (active) curl-ca-bundle @7.20.0_3 (active) expat @2.0.1_0 (active) findutils @4.4.2_0 (active) gettext @0.17_4 (active) git-core @1.7.0.4_0 (active) gmp @5.0.1_0 (active) gperf @3.0.4_0 (active) gsed @4.2.1_0 (active) i386-elf-binutils @2.18.50.0.9_0+darwin_10 (active) libiconv @1.13.1_0 (active) libidn @1.16_0 (active) mpfr @2.4.2-p1_0 (active) ncurses @5.7_0+darwin_10 (active) ncursesw @5.7_0+darwin_10 (active) openssl @0.9.8n_0+darwin (active) p5-error @0.17016_0 (active) perl5 @5.8.9_0 (active) perl5.8 @5.8.9_3 (active) pkgconfig @0.23_1 (active) popt @1.15_0 (active) rsync @3.0.7_0 (active) zlib @1.2.4_1 (active)

localhost ~ $

---

The all ports were build with build_arch i386.