Opened 22 years ago

Closed 22 years ago

Last modified 9 years ago

#308 closed defect (invalid)

diff for README — at Version 3

Reported by: fkr-ml@… Owned by: kvv@…
Priority: Normal Milestone:
Component: base Version: 1.0
Keywords: Cc:
Port:

Description (last modified by ryandesign (Ryan Carsten Schmidt))

this diff changes all "Darwin Ports' and 'darwinports' (only if not in the sense of any commands, directories etc.) to DarwinPorts, as this is the "correct way" :)

this diff depends on bug #307, as it mentions doc/portfileHOWTO (which was submitted in #307)

the diff can also be found at: http://www.opendarwin.org/~fkr/patch-README

Index: README
===================================================================
RCS file: /Volumes/src/cvs/od/proj/darwinports/README,v
retrieving revision 1.25
diff -u -r1.25 README
--- README	23 Dec 2002 19:35:17 -0000	1.25
+++ README	27 Dec 2002 20:04:13 -0000
@@ -1,16 +1,16 @@
 WHAT IS THE DARWIN PORTS SYSTEM
 
-    Darwin Ports is a software build, install, and packaging infrastructure
+    DarwinPorts is a software build, install, and packaging infrastructure
 designed to meet the same functionality requirements as the FreeBSD ports
 architecture while maintaining extensibility for future enhancement.
 
-    Darwin Ports currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
+    DarwinPorts currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
 system is portable, written in TCL with a limited set of TCL extensions in C.
 
     For in-depth documentation on the internals of the ports system
 architecture, refer to base/docs/INTERNALS.
 
-    Please note that darwinports is split into two parts.  The "darwin ports
+    Please note that DarwinPorts is split into two parts.  The "darwin ports
 infrastructure", which lives in the base/ subdirectory and is the only
 mandatory component of the system, and the "dports" directory which contains
 the actual ported software descriptions.  The latter is optional and can be
@@ -24,7 +24,7 @@
 		Run 'make' to compile all necessary software.
 
 	2. sudo make install
-		Run 'sudo make install' to install darwinports on your system.
+		Run 'sudo make install' to install DarwinPorts on your system.
 
 	3. [optional] edit /etc/ports/ports.conf
 		The /etc/ports/ports.conf configuration file defines several
@@ -46,7 +46,7 @@
     All necessary code and TCL will be compiled and installed as follows:
 	[Mac OS X] /System/Library/Tcl/8.3/darwinports1.0
 	[FreeBSD] /usr/local/lib/tcl8.3/darwinports1.0
-	    - TCL library for interfacing with the Darwin Ports System
+	    - TCL library for interfacing with the DarwinPorts System
 
 	PREFIX is set to /opt/local but can be overridden on the make command
 	line and affects the installation of the following components:
@@ -69,7 +69,7 @@
 USING THE PORT COMMAND
 
     If you haven't already, add /opt/local/bin to your path (or $PREFIX/bin
-if you've elected to install darwinports somewhere else). If you're
+if you've elected to install DarwinPorts somewhere else). If you're
 unsure how, add the following line to your ~/.cshrc file.
 
 	set path=($path /opt/local/bin)
@@ -102,8 +102,8 @@
 to be kept to a minimum.
 
     A Portfile consists of valid TCL, evaluated by a TCL interpreter
-instantiated by the Darwin Ports System. Portfiles use extremely straight-
+instantiated by the DarwinPorts System. Portfiles use extremely straight-
 forward key/value pair syntax, while allowing the author to use the full
 extent of TCL's functionality where necessary.
 
-    To get started, refer to doc/exampleport and the portfile(7) man page.
+    To get started, refer to doc/portfileHOWTO and the portfile(7) man page.

Change History (3)

comment:1 Changed 22 years ago by fkr-ml@…

dependson: 307
Summary: diff for README diff for README

an updated patch.

it's at: http://www.opendarwin.org/~fkr/patch-README

and here:

Index: README
===================================================================
RCS file: /Volumes/src/cvs/od/proj/darwinports/README,v
retrieving revision 1.25
diff -r1.25 README
3c3
<     Darwin Ports is a software build, install, and packaging infrastructure
---
>     DarwinPorts is a software build, install, and packaging infrastructure
7c7
<     Darwin Ports currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
---
>     DarwinPorts currently builds and runs on MacOS X 10.2 (Darwin 6.0). The
13c13
<     Please note that darwinports is split into two parts.  The "darwin ports
---
>     Please note that DarwinPorts is split into two parts.  The "darwin ports
27c27
< Run 'sudo make install' to install darwinports on your system.
---
> Run 'sudo make install' to install DarwinPorts on your system.
49c49
<     - TCL library for interfacing with the Darwin Ports System
---
>     - TCL library for interfacing with the DarwinPorts System
72c72
< if you've elected to install darwinports somewhere else). If you're
---
> if you've elected to install DarwinPorts somewhere else). If you're
105c105
< instantiated by the Darwin Ports System. Portfiles use extremely straight-
---
> instantiated by the DarwinPorts System. Portfiles use extremely straight-
109c109,110
<     To get started, refer to doc/exampleport and the portfile(7) man page.
---
>     To get started, refer to base/doc/exampleport, base/doc/portfileHOWTO
> and the portfile(7) man page.
Last edited 9 years ago by ryandesign (Ryan Carsten Schmidt) (previous) (diff)

comment:2 Changed 22 years ago by fkr-ml@…

Resolution: invalid
Status: newclosed

comment:3 Changed 9 years ago by ryandesign (Ryan Carsten Schmidt)

Description: modified (diff)
Note: See TracTickets for help on using tickets.