Opened 11 years ago

Closed 11 years ago

Last modified 11 years ago

#40250 closed defect (fixed)

octave-devel configure failure: to build Octave, you must have the PCRE library and header files installed

Reported by: Schamschula (Marius Schamschula) Owned by: michaelld (Michael Dickens)
Priority: Normal Milestone:
Component: ports Version: 2.2.0
Keywords: Cc:
Port: octave-devel

Description (last modified by ryandesign (Ryan Carsten Schmidt))

While updating octave-devel to version 3.6.4_7 +atlas +gcc48 darwin_10, I found a configuration issue:

:info:configure checking libqhull/libqhull.h usability... no
:info:configure checking libqhull/libqhull.h presence... no
:info:configure checking for libqhull/libqhull.h... no
:info:configure checking qhull/libqhull.h usability... no
:info:configure checking qhull/libqhull.h presence... no
:info:configure checking for qhull/libqhull.h... no
:info:configure checking libqhull.h usability... no
:info:configure checking libqhull.h presence... no
:info:configure checking for libqhull.h... no
:info:configure checking qhull/qhull.h usability... no
:info:configure checking qhull/qhull.h presence... no
:info:configure checking for qhull/qhull.h... no
:info:configure checking qhull.h usability... no
:info:configure checking qhull.h presence... no
:info:configure checking for qhull.h... no
:info:configure configure: WARNING: Qhull library not found -- this will result in loss of functionality of some geometry functions.
:info:configure checking pcre.h usability... no
:info:configure checking pcre.h presence... no
:info:configure checking for pcre.h... no
:info:configure checking pcre/pcre.h usability... no
:info:configure checking pcre/pcre.h presence... no
:info:configure checking for pcre/pcre.h... no
:info:configure checking whether pcre.h defines the macros we need... no
:info:configure configure: error: to build Octave, you must have the PCRE library and header files installed
:info:configure Command failed:  cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_math_octave-devel/octave-devel/work/octave-3.6.4" && ./configure --prefix=/opt/local --disable-dependency-tracking --with-umfpack="-lumfpack -lSuiteSparse" --with-blas="-lcblas -lf77blas -latlas" --disable-docs --without-x --without-opengl --with-cholmod="-lcholmod" 
:info:configure Exit code: 1

Looks like some CPPFLAGS are not being set, as both qhull and pcre headers can't be found.

As I had 3.6.4_6 +atlas +gcc47 darwin_10, working, but I followed the troubleshooting advice and removed it to re-attempt installing the current version. Rebuilding it using the old Portfile...

Attachments (2)

main.log (180.2 KB) - added by Schamschula (Marius Schamschula) 11 years ago.
config.log (1.6 MB) - added by Schamschula (Marius Schamschula) 11 years ago.

Download all attachments as: .zip

Change History (24)

comment:1 Changed 11 years ago by ryandesign (Ryan Carsten Schmidt)

Description: modified (diff)
Owner: changed from macports-tickets@… to michaelld@…
Port: octave-devel added
Summary: octave-devel configure failureoctave-devel configure failure: to build Octave, you must have the PCRE library and header files installed

Please attach the main.log file.

comment:2 Changed 11 years ago by ryandesign (Ryan Carsten Schmidt)

And let us know your version of Xcode please.

Changed 11 years ago by Schamschula (Marius Schamschula)

Attachment: main.log added

comment:3 Changed 11 years ago by Schamschula (Marius Schamschula)

I'm using Xcode 4.2.

comment:4 Changed 11 years ago by michaelld (Michael Dickens)

What does "port installed pcre" return?

comment:5 Changed 11 years ago by michaelld (Michael Dickens)

Also, what do the following return for you:

gcc -v
cd `port dir qt4-mac`/files/cpath
/usr/bin/gcc -nostdinc -c cpath_test.c
CPATH=. /usr/bin/gcc -nostdinc -c cpath_test.c

comment:6 Changed 11 years ago by Schamschula (Marius Schamschula)

marius$ gcc -v Using built-in specs. Target: i686-apple-darwin10 Configured with: /private/var/tmp/llvmgcc42/llvmgcc42-2336.1~3/src/configure --disable-checking --enable-werror --prefix=/Developer/usr/llvm-gcc-4.2 --mandir=/share/man --enable-languages=c,objc,c++,obj-c++ --program-prefix=llvm- --program-transform-name=/[cg][.-]*$/s/$/-4.2/ --with-slibdir=/usr/lib --build=i686-apple-darwin10 --enable-llvm=/private/var/tmp/llvmgcc42/llvmgcc42-2336.1~3/dst-llvmCore/Developer/usr/local --program-prefix=i686-apple-darwin10- --host=x86_64-apple-darwin10 --target=i686-apple-darwin10 --with-gxx-include-dir=/usr/include/c++/4.2.1 Thread model: posix gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)

marius$ /usr/bin/gcc -nostdinc -c cpath_test.c cpath_test.c:1:24: error: no include path in which to search for cpath_test.h

marius$ CPATH=. /usr/bin/gcc -nostdinc -c cpath_test.c /var/folders/+K/+KtVoCAtHtenBwlP19tRrU+++TI/-Tmp-ccY5EIpM.s:unknown:FATAL:can't create output file: cpath_test.o

Note: marius$ sudo CPATH=. /usr/bin/gcc -nostdinc -c cpath_test.c worked as expected.

comment:7 Changed 11 years ago by Schamschula (Marius Schamschula)

marius$ port installed pcre The following ports are currently installed:

pcre @7.9_0 pcre @8.10_0 pcre @8.12_0 pcre @8.12_1 pcre @8.33_0 (active)

comment:8 Changed 11 years ago by michaelld (Michael Dickens)

Thanks. The issue has something to do with permissions of your computer's filesystem. Can you run Disk Utility.app and have it repair disk permissions, then try

CPATH=. /usr/bin/gcc -v -nostdinc -c cpath_test.c

to see if it now works? If not, post the results here, surrounded by three { }; that's how I get the special box just above reading "CPATH ...".

comment:9 in reply to:  8 Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to michaelld@…:

Thanks. The issue has something to do with permissions of your computer's filesystem. Can you run Disk Utility.app and have it repair disk permissions, then try

CPATH=. /usr/bin/gcc -v -nostdinc -c cpath_test.c

to see if it now works? If not, post the results here, surrounded by three { }; that's how I get the special box just above reading "CPATH ...".

I ran Repair Permissions on the boot HD.

However,

CPATH=. /usr/bin/gcc -v -nostdinc -c cpath_test.c

still fails.

Note when I do a ls -l on the enclosing directory for cpath I get

drwxr-xr-x  6 root  admin    204 Aug 26 12:52 cpath

Thus, no surprise why the .o file can't be written.

comment:10 Changed 11 years ago by michaelld (Michael Dickens)

OK; try this:

cd ~/Desktop
cp -rp `port dir qt4-mac`/files/cpath_test
cd cpath_test
CPATH=. /usr/bin/gcc -v -nostdinc -c cpath_test.c

and see if that works. Permissions should be OK for this test, at least in your local directory; I think the permission issue is with /var/.....

Version 0, edited 11 years ago by michaelld (Michael Dickens) (next)

comment:11 in reply to:  10 Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to michaelld@…:

OK; try this:

cd ~/Desktop
cp -rp `port dir qt4-mac`/files/cpath cpath_test
cd cpath_test
CPATH=. /usr/bin/gcc -v -nostdinc -c cpath_test.c

and see if that works. Permissions should be OK for this test, at least in your local directory; I think the permission issue is with /var/.....

Works just fine.

I'm assuming you meant /opt/local/var. Listing the enclosing directory:

marius$ ls -l
total 8
drwxr-xr-x     5 root  wheel    170 Aug 21 11:18 Library
drwxr-xr-x    13 root  admin    442 Aug 22 14:21 apache2
drwxr-xr-x  2299 root  admin  78166 Aug 26 10:59 bin
drwxr-xr-x    14 root  admin    476 Aug 21 13:56 dx
drwxr-xr-x    43 root  admin   1462 Aug 26 10:08 etc
drwxr-xr-x   594 root  admin  20196 Aug 26 10:59 include
drwxr-xr-x  1884 root  admin  64056 Aug 26 10:59 lib
drwxr-xr-x    48 root  admin   1632 Aug 26 09:56 libexec
lrwxr-xr-x     1 root  admin      9 Mar 27  2012 man -> share/man
drwxr-xr-x    70 root  admin   2380 Aug 22 16:54 sbin
drwxr-xr-x   168 root  admin   5712 Aug 26 10:26 share
drwxr-xr-x     3 root  admin    102 Aug 22 16:46 src
drwxr-xr-x    13 root  admin    442 Aug 22 16:28 var
drwxr-xr-x     2 root  admin     68 Jan  6  2010 www

comment:12 Changed 11 years ago by michaelld (Michael Dickens)

Hmm .. interesting; CPATH is working, so I would expect octave's configure script to pick up the headers and such for pcre and qhull. I was not referring to /opt/local/var, but thanks. Can you attach the file "port dir octave-devel/work/octave-3.6.4/config.log"?

comment:13 in reply to:  12 ; Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to michaelld@…:

Hmm .. interesting; CPATH is working, so I would expect octave's configure script to pick up the headers and such for pcre and qhull. I was not referring to /opt/local/var, but thanks. Can you attach the file "port dir octave-devel/work/octave-3.6.4/config.log"?

I get

marius$ port dir octave-devel/work/octave-3.6.4/config.logError: Port octave-devel/work/octave-3.6.4/config.log not found

Changed 11 years ago by Schamschula (Marius Schamschula)

Attachment: config.log added

comment:14 Changed 11 years ago by michaelld (Michael Dickens)

Sorry, bad wiki formatting. I meant: "`port dir octave-devel`/work/octave-3.6.4/config.log" if you copy the text from the wiki.

comment:15 in reply to:  13 Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to mschamschula@…:

Replying to michaelld@…:

Hmm .. interesting; CPATH is working, so I would expect octave's configure script to pick up the headers and such for pcre and qhull. I was not referring to /opt/local/var, but thanks. Can you attach the file "port dir octave-devel/work/octave-3.6.4/config.log"?

I get

marius$ port dir octave-devel/work/octave-3.6.4/config.logError: Port octave-devel/work/octave-3.6.4/config.log not found

Never mind. I found it manually.

comment:16 Changed 11 years ago by michaelld (Michael Dickens)

OK; next up:

cd ~/Desktop
cp -rp `port dir qt4-mac`/files/cpath cpath_test_2
cd cpath_test_2
CPATH=. /usr/bin/clang -v -nostdinc -c cpath_test.c

and see if that works.

comment:17 in reply to:  16 Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to michaelld@…:

OK; next up:

cd ~/Desktop
cp -rp `port dir qt4-mac`/files/cpath cpath_test_2
cd cpath_test_2
CPATH=. /usr/bin/clang -v -nostdinc -c cpath_test.c

and see if that works.

Nope:

marius$ CPATH=. /usr/bin/clang -v -nostdinc -c cpath_test.c
Apple clang version 3.0 (tags/Apple/clang-211.10.1) (based on LLVM 3.0svn)
Target: x86_64-apple-darwin10.8.0
Thread model: posix
 "/usr/bin/clang" -cc1 -triple x86_64-apple-macosx10.6.8 -emit-obj -mrelax-all -disable-free -disable-llvm-verifier -main-file-name cpath_test.c -pic-level 1 -mdisable-fp-elim -relaxed-aliasing -masm-verbose -munwind-tables -target-cpu core2 -target-linker-version 127.2 -v -coverage-file cpath_test.o -nostdinc -resource-dir /usr/bin/../lib/clang/3.0 -ferror-limit 19 -fmessage-length 80 -stack-protector 1 -fblocks -fdiagnostics-show-option -fcolor-diagnostics -o cpath_test.o -x c cpath_test.c
clang -cc1 version 3.0 based upon llvm 3.0svn hosted on x86_64-apple-darwin10.8.0
#include "..." search starts here:
End of search list.
cpath_test.c:1:10: fatal error: 'cpath_test.h' file not found
#include <cpath_test.h>
         ^
1 error generated.

comment:18 Changed 11 years ago by michaelld (Michael Dickens)

Excellent! I'll create a compiler blacklist for this port, since it relies on CPATH functionality which is clearly not present in the version of CLANG in Xcode 4.2. Back shortly.

comment:19 Changed 11 years ago by michaelld (Michael Dickens)

Fixed in r110134. You'll want to do

sudo port selfupdate

before trying again.

comment:20 Changed 11 years ago by michaelld (Michael Dickens)

Resolution: fixed
Status: newclosed

comment:21 in reply to:  19 Changed 11 years ago by Schamschula (Marius Schamschula)

Replying to michaelld@…:

Fixed in r110134. You'll want to do

sudo port selfupdate

before trying again.

Works for me.

Thanks!

comment:22 Changed 11 years ago by michaelld (Michael Dickens)

Great! Thanks for the feedback.

Note: See TracTickets for help on using tickets.